Toxicity of the recombinant human hyaluronidase ALT-BC4 on embryonic development

( Ji Hye Lee ),( Miyoun Yoo ),( Sang Mee Lee ),( Soon-jae Park ),( Tae Young Kil ),( Min Kyu Kim ) 한국축산학회 2021 한국축산학회지 Vol.63 No.2

Cumulus-oocyte complexes (COCs), which contain immature oocytes, are matured in vitro for in vitro embryo production. Oocyte and cumulus cells are then separated using hyaluronidase. To date, there have only been a few reported cases of the toxic effects of hyaluronidase on porcine oocytes. The aim of this study was to compare the effects of bovine testis-derived hyaluronidase and recombinant human hyaluronidase on oocyte denudation and quality. Porcine COCs were matured for 44 h and denuded using different hyaluronidase concentrations and exposure times. Then, oocytes were activated by electrical parthenogenesis. In experiment 1, COCs were denuded using bovine-derived, ovine-derived (Hirax), and human recombinant (ALT-BC4) hyaluronidases for 10 and 20 min. In experiment 2, bovine-derived and human recombinant (ALT-BC4 and ICSI Cumulase^®) hyaluronidases were used to denude the COCs for 2 and 20 min. In both experiments the oocytes were all completely denuded, and there was no degeneration. Rate of embryo development was significantly increased in group treated ALT-BC4 for 2 min and not significantly different in other treatment groups. In general it slightly decreased with longer exposure times. These results have confirmed that different sources of hyaluronidase do not have detrimental effects on the quality of porcine oocytes and suggest that the human recombinant hyaluronidase ALT-BC4 is suitable for oocyte denudation with an increased blastocyst rate.

반응표면분석에 의한 노랑느타리버섯 추출물의 추출조건 최적화

이혜진(Hye-Jin Lee),도정룡(Jeong-Ryong Do),정민유(Min-Yu Chung),김현구(Hyun-Ku Kim) 한국식품영양과학회 2014 한국식품영양과학회지 Vol.43 No.10

노랑느타리버섯의 항산화 활성을 측정하여 효율적 추출조건을 예측하기 위해 마이크로웨이브 에너지, 에탄올 농도, 추출시간의 요인변수를 중심합성법에 따라 설정하여 반응표면분석을 통해 최적화 조건을 설정하였다. 노랑느타리버섯 추출물의 수율, 전자공여작용, SOD 유사 활성, 총 폴리페놀 함량에 대한 반응표면의 회귀식 R² 값이 각각 0.91, 0.87, 0.86 및 0.87로 분석되었고, 수율은 P<0.01, 항산화 활성이 P<0.05에서 유의적 수준을 나타냈다. 노랑느타리버섯은 요인변수에 따라 수율, 전자공여작용, 총 폴리페놀 함량의 경우 마이크로웨이브 에너지의 영향을 가장 많이 받았고, SOD유사 활성의 경우 에탄올 농도에 따른 유의적 차이를 보였다. 추출물의 각 특성을 모두 만족시키는 최적의 추출조건의 범위는 superimposing 하여 마이크로웨이브 에너지 71.48~92.84 watts, 에탄올 농도 55.01~71.66%, 추출시간 3~9분으로 예측되었다. Response surface methodology (RSM) was used to optimize extraction conditions of Pleurotus cornocopiae. Coefficients of determination (R²) for dependent variables ranged from 0.86 at 0.91. Maximum extraction yield was 40.81% under the following conditions: microwave power of 60.08 watts, ethanolic concentration of 12.33%, and extraction time of 6.86 min. Maximum extraction electron donating ability was 35.72% at 44.13 watts, 19.30%, and 4.21 min. Maximum extraction superoxide dismutase (SOD)-like activity was 34.87% at 114.01 watts, 65.88%, and 1.56 min. Maximum extraction total polyphenol content was 31.77 mg/g at 50.52 watts, 23.00% and 2.90 min. Based on the superimposition of four dimensional RSM with respect to extraction yield, electron donating ability, SOD-like activity, and total polyphenol content obtained under various extraction conditions, the optimum ranges of extraction conditions were as follows: microwave power of 71.48~92.84 watts, ethanol concentration of 55.01~71.66%, and extraction time of 3~9 min.

피프로닐 오염도 조사를 위한 분석법 정립

조순길 ( Soon-kil Cho ),이미진 ( Mi-jin Lee ),이정민 ( Jeong-min Lee ),김호진 ( Ho-jin Kim ),박수민 ( Soo-min Park ),박혜진 ( Hye-jin Park ),이승화 ( Seung-hwa Lee ),안종성 ( Jong-sung Ahn ) 한국환경농학회 2018 한국환경농학회 학술대회집 Vol.2018 No.-

2017년 유럽에서 피프로닐에 오염된 계란이 유통된데 이어 국내에서 생산된 일부 계란에서도 살충제가 검출되었다. 피프로닐은 진드기 방제 목적으로 사용되는 살충제로 sulfide, sulfone, amide, sulfoxide의 대사산물을 생성한다. 피프로닐은 물에 1.9 mg/L 정도 용해되고, 아세톤에 545.9g/L가 용해되는 성질이 있어 시료 채취시 아세톤을 사용한다. 농장시설 등에 부착된 피프로닐을 제거하기 위해 5% 탄산나트륨(Na2CO3)과 15% 과산화수소(H2O2)를 권장하고 있다. 이는 피프로닐을 피프로닐설폰으로 산화시킨 다음 반복적으로 사용하여 제거한다. 이러한 제거 작업을 통해 피프로닐이 제거된 정도를 조사할 필요가 있고, 이를 위한 분석법 정립이 필요하다. 시료를 250 mL 용기에 넣고 1% 함유 아세토니트릴 100 mL을 주가하여 10분간 격렬하게 진탕한 후, 3500 rpm으로 원심분리를 하였다. 추출액 1 mL을 0.2 um 멤브레인필터로 여과하여 시험용액으로 하였다. 칼럼은 C18(2.0 mm I.d×50mm, 3 um)을 사용하였고, 이동상은 0.1% 포름산 함유 메탄올과 0.1% 포름산 및 5 mM 아세트산암모늄이 함유된 물을 사용하였다. 분석조건으로 피프로닐의 선구이온은 437 m/z, 생성이온은 368, 255, 290 m/z, positive 조건으로 분석하였고, 피프로닐 설폰의 선구이온은 451 m/z, 생성이온은 415, 282, 244 m/z negative 조건으로 분석하였다. 분석법의 정량한계는 피프로닐 0.92 ug/kg, 피프로닐설폰 0.70 ug/kg이었다. 피프로닐과 피프로닐 설폰을 각각 1, 5, 10, 50, 100 ug/kg 수준으로 검량선을 작성한 결과, r2는 모두 0.9999이었다. 10 ug/kg과 50 ug/kg 수준의 3반복 회수율 실험결과, 10ug/kg 수준에서 피프로닐은 74.7±0.56%, 피프로닐 설폰은 88.9± 0.27%로 나타났다. 50 ug/kg 수준에서는 피프로닐은 78.6±0.11%, 피프로닐 설폰은 95.2±0.02%로 유효회수율 범위(70~120%)에 포함되었다. 머무름 시간은 피프로닐 5.3 mim, 피프로닐 설폰은 5.7min에서 검출되었다. 교차확인 목적으로 LC/MS/MS로 분석한 시료를 GC/μ-ECD로 분석을 하였다. 분석조건은 주입구 온도 250℃, (5%-Phenyl)-methylpolysiloxane이 충진된 30 m×0.25 mm×0.25 um길이의 칼럼이다. 오븐온도는 130℃에서 300℃까지 승온 조건으로 분석하였고, 머무름시간은 피프로닐 11.64 min, 피프로닐 설폰12.79 min으로 LC/MS/MS와 GC/μ-ECD 모두 표준물질과 시료의 결과가 일치함을 알 수 있었다. 정립된 분석법은 피프로닐 오염도조사를 위한 분석법으로 활용할 수 있을 것으로 판단된다.

Protective Effects of N-acetylcystenine and Selenium against Doxorubicin Toxicity in Rats

Yeo-sung Yoon,Sun-don Kim,Min-hye Lee,Heung-shik S.Lee,In-se Lee,Je-kyung Sung,Eun-sung Park 대한수의학회 2003 Journal of Veterinary Science Vol.4 No.2

Effects of N-acetylcysteine and Selenium against Doxorubicin Toxicity in RatsEun-sung Park, Sun-don Kim1, Min-hye Lee, Heung-shik S. Lee, In-se Lee, Je-kyung Sung and Yeo-sung Yoon*

Dose-linear pharmacokinetics of oleanolic acid after intravenous and oral administration in rats

Jeong, Dong Won,Kim, Young Hoon,Kim, Hui Hyun,Ji, Hye Young,Yoo, Sun Dong,Choi, Won Rack,Lee, Soo Min,Han, Chang-Kyun,Lee, Hye Suk WILEY PUBLISHERS 2007 BIOPHARMACEUTICS AND DRUG DISPOSITION Vol.28 No.2

<P>The pharmacokinetics of oleanolic acid was evaluated in vitro and in vivo. From Caco-2 cell permeation studies, oleanolic acid was a low permeability compound with no directional effects, suggesting a low in vivo absorption mediated by a passive diffusion. Oleanolic acid was metabolically unstable following incubation with rat liver microsomes in the presence of NADPH. After intravenous injection at doses of 0.5, 1 and 2 mg/kg doses, oleanolic acid showed dose-linear pharmacokinetics as evidenced by unaltered CL (28.6–33.0 ml/min/kg), V<SUB>ss</SUB> (437–583 ml/kg), dose-normalized AUC (16.0–17.9 µg min/ml based on 1 mg/kg) and t<SUB>1/2</SUB> (41.9–52.7 min). Following oral administration of oleanolic acid at doses of 10, 25 and 50 mg/kg, T<SUB>max</SUB>, t<SUB>1/2</SUB>, dose-normalized C<SUB>max</SUB> (66–74 ng/ml based on 25 mg/kg) and dose-normalized AUC (5.4–5.9 µg min/ml based on 25 mg/kg) were comparable between 25 and 50 mg/kg dose, but the plasma concentrations at 10 mg/kg dose were not measurable as they were below the limit of quantitation (2 ng/ml). The absolute oral bioavailability was 0.7% for oral doses of 25 and 50 mg/kg. The extent of urinary excretion was minimal for both i.v. and oral doses. The very low oral bioavailability of oleanolic acid could be due to a poor absorption and extensive metabolic clearance. Copyright © 2007 John Wiley & Sons, Ltd.</P>

Determination of the optimum porosity for 2‑CEES adsorption by activated carbon fiber from various precursors

Hye‑Min Lee,Byeong‑Hoon Lee,Ju‑Hwan Kim,Kay‑Hyeok An,Soo‑Jin Park,Byung‑Joo Kim 한국탄소학회 2019 Carbon Letters Vol.29 No.6

In this study, we prepared ACFs with a high specific surface area from various precursors (rayon, pitch, and oxidized polyacrylonitrile-based fibers) by a steam-activation technique and investigated the effects of the micropore and mesopore fraction on 2-CEES adsorption behaviors. The activation time was precisely controlled so that the activation yield was in the range of 35–40% to ensure the mechanical properties of the ACFs. The N2 adsorption isotherm characteristics at 77K were confirmed by Brunauer–Emmett–Teller, Barrett–Joyner–Halenda and non-local density functional theory equations. The adsorption capacities of the ACF were measured by breakthrough experiments in the gas phase (750 μg/mL of 2-CEES in N2 flow). The removal efficiency of the ACFs was evaluated and compared with that of AC. From the results, specific surface areas and total pore volume of the ACF were determined to be 1380–1670 m2/g and 0.61–0.82 cm3/g, respectively. It was also observed that various pore characteristics of ACF were found to be dependent on crystallite structure of each precursor. The break through time (C/C0 = 0.10) was in the order of Oxi-Pan-H-9-2 < Saratoga AC < Rayon-H-9-3 < Pitch-H-9-4. This indicates that 2-CEES adsorption capacity could be a function not only of specific surface area or total pore volume, but also of sub-mesopore volume fraction in the range of 1.5–2.5 nm of adsorbents.

휴대폰 카메라용 자동초점 구동기의 충격해석

이성민,김봉석,송준호,이수훈,이혜진,이문구,송준엽,이창우 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

Recently, the robustness against daily impact is important according to portablization and downsizing of mobile electronics. Especially, almost parts of cellular phone should undergo drop test when they fall 1.5 m above ground. This test simulates the case when cellular phone slips through user's fingers while he is talking on the phone. This paper studies a drop test of auto focusing (AF) actuator for camera module in cellular phone. This component is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. The leaf spring's deformation is essential for the test because its permanent distortion disables the focusing, and then, a high quality photograph cannot be obtained. Up to now the drop test has been carried out after fabricating real AF actuator. We propose a dropt test model which simulates the drop test based on finite element analysis. This model makes us enable investigate the stress acting on the clamping and curved parts of leaf spring. Stress over Von Mises criterion lets the spring deformed permanently, and then AF actuator malfunctioned, It helps us to design and modify AF actuator without manufacturing the real product. And also, it saves the time and cost for the development of new products.

Determination of Authentic Chiisanoside in Acanthopanax senticousus by High Performance Liquid Chromatography

Lee, Jeong-Min,Kim, Min-Hye,Lee, Sang-Hyun The Plant Resources Society of Korea 2007 한국자원식물학회지 Vol.20 No.3

High performance liquid chromatography (HPLC) was used for the analysis of chiisanoside in each stem and root of Acanthopanax senticosus collected from South Korea, North Korea, China and Russia. A reverse-phase system using a gradient of H$_{2}$O and acetonitrile as the mobile phase was developed and detection was at 210nm. The analysis was successfully carried out within 30 min. Chiisanoside was measured in the stem and root of A. senticosus collected from various countries.

Analysis of Lignans in Acanthopanax sessiliflorus Fruits and Their Fermented Wine by HPLC

Hye-Min Kim,Ju-Sun Kim,Seon-Haeng Cho,Sam-Sik Kang,Dae-Sung Cheoi,Sang-Hyun Lee 한국약용작물학회 2006 한국약용작물학회지 Vol.14 No.5

High performance liquid chromatography (HPLC) was used for the determination of lignans, eleutherosides B and E, in Acanthopanax sessiliflorus fruits and their fermented wine. The lignans were quantified by a reversed-phase system using a gradient of H2O and acetonitrile as a mobile phase within 20 min. The analysis was successfully carried out within 20 min. The contents of eleutherosides Band E as main active principles of Acanthopanax species were measured in A. sessiliflorus fruits (1.15 and 8.49 μg/mg, respectively), their fermented wine (0.45 and 1.33 μg/mg, respectively) and wine residues (no detection).

레이저 웨이퍼 다이싱 장비의 가공 특성 평가

한민섭,김성수,민병권,이승우,이진하,이혜진 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

As the semiconductor wafer is required to be thinner for better compactness and higher integrity of the electronic products, mechanical dicing saw technique using the diamond blade is facing serious problems such as low cutting speed, tool wear, side wall crack and back side chipping. Recently, UV laser dicing process has emerged as an alternative methods to the blade dicing especially for the very thin wafers below 100㎛. In this study 355 nm UV laser dicing system has been developed in order to improve the productivity and reliability of ultra thin wafer dicing process. For the quality improvement of the developed dicing system various laser parameters are investigated such as power, speed and frequency of the laser beam. Moreover various measurement techniques are employed to evaluate the dicing quality using optical microscope, SEM and focused ion beam.