HPGL를 이용한 컴퓨터 제어 마킹기 설계

전성구,김일환 江原大學校 産業技術硏究所 2004 産業技術硏究 Vol.24 No.B

This paper proposes an algorithm of CAD data extraction for the computer controlled marking system. In general, logo has been directly designed at the marking controller, but that is not an effective method because of the very limited working area. In this paper, for the data extraction we used a general PC and Auto CAD for logo design, and developed the software with GUI(Graphic User Interface) method. Then the data is transferred to the marking controller for marking on the object. With experimental result we showed the proposed algorithm to be very effective in the computer controlled marking system.

2차원 바코드를 위한 데이터 부호화 알고리즘 설계

전성구,김일환 강원대학교 산업기술연구소 2005 産業技術硏究 Vol.25 No.B

In this paper, we propose a new data encoding algorithm for a two-dimensional bar code system. In general, the one-dimensional bar code is just a key which can access detailed information to the host computer database. But the two-dimensional bar code is a new technology which can obtain high density information without access to the host computer database. We implemented the encoding algorithm for Data Matrix bar code which is the most widely used among the many kinds of two-dimensional bar codes in the field of marking using Digital Signal Processor (TMS320C31). The performance of the proposed algorithm is verified by comparing the imprinted symbols on the steel surfaces with the codes which are decoded by a bar code reader.

구미지역 직업성질환 감시체계

김성아,김진석,전혜리,정상재,김상우,이채용,함정오,유재영,최태성,하봉구,조민환,우극현 大韓産業醫學會 2003 대한직업환경의학회지 Vol.15 No.1

목적: 구미지역 내 대학병원이자 특수건강진단·보건관리대행기관의 산업의학전문의, 보건관리대행 간호사, 사업장 간호사를 중심으로 직업성질환감시체계를 구축하여 주요 직업성질환들의 발생현황과 규모를 파악하고자 하였다. 또한 연차적으로 산업, 직업, 업무내용 등에 따른 분포나 원인을 기존 자료원(특수건강진단의 직업병 유소견자와 산재요양승인 되는 직업병자)과 비교하여 분석·기술하고 예방 및 관리를 포함한 보건의료기술개발까지을 포함하는 종합적인 감시체계를 구축하고 운용하고자 하였다. 방법: 구미지역의 산업적 특성에 맞는 직업성질환감시체계를 구축하고 지역 감시체계의 모델을 제시하였다. 6대 감시대상 직업성질환(독성 간염, 직업성천식, 직업성 근골격계질환, 직업성 피부질환, 직업성 암, 수지진동증후군)의 실행적 환례정의, 보고양식 및 보고체계 개발, 분석양식 및 결과 배포 형식을 개발하였으며, 그 유병규모를 파악하고, 감시질환의 분포 및 특성, 관련인자 등을 분석·기술하고자 하였다. 이때, 1년간의 환례분석시 직업병 유소견자 및 직업병 요양자에 대한 자료와 함께 비교 분석하였으며, 노동통계자료를 이용하여 년간 발생률을 추정하였다. 결과: 2001. 1. 1일부터 2002.4.30일까지 총 287건이 보고되었으며, 직업성 근골격계질환 132건(46.0%), 직업성 피부질환 100건(34.8%), 독성간염 34건 (11.8%), 직업성천식 16건 (5.6%), 수지진동증후군 5건 (1.7%) 이었으며 직업성 암은 한건도 보고되지 않았다. 보고경로별로는 보건관리대행에서 33건 (11.5%), 해당 유해인자별로 실시되는 특수검진 외의 각종 건강진단업무 수행 중 발견된 환례에 대한 보고가 206건(71.7%)이었다. 직종별 분류의 결과는 섬유업종사자, 단순노무종사자, 음식업종사자 등이 다수를 차지하였다. 근골격계질환의 경우, 수근관증후군이 42건(33%), 외상과염/내상과염이 39건(30%)로 가장 많았다. 직업성 피부질환은 97건이 접촉성 피부염으로 유기용제류가 59건(59%)으로 가장 많고, 니켈 및 에폭시수지에 의한 알레르기성 접촉성 피부염이 각각 6건과 5건이었다. 독성 간염은 모두 DMF 나 DMAc에 의한 것으로, 근무시작 후부터 간기능이상이 발견되기까지의 근무기간은 대부분이 3개월 이하이며, 1개월 이하인 경우도 10건이나 되었다. 동 기간 중 감시환례에 대해 산재요양 자료와 중복여부를 확인한 결과, 중복되는 것은 하나도 없었다. 특수건강진단에서 직업병유소견자로 판정된 경우는 독성간염에서 3건이 있었으며, 나머지 질환은 중복되는 것은 없었다. 2001도 구미지역의 근로자수와 보고환례건수를 이용하여 연간 발생률을 추정하였다. 근로자 10만 명당 연간 발생률은 상지 근골격계질환은 63.6명, 피부질환 48.2명, 독성 간염 17.9명, 천식 7.7명, 수진진동증후군 2.4명이었다. 참여예상인원은 총 46명이었으며, 실제 참여자수는 21명, 평균참여율은 46%, 실제 참여 1이당 평균 보고건수는 산업의학전문의가 28건으로 가장 많았고, 대행간호사는 45,건, 사업장 간호사는 3.3건이었다. 결론: 지역 감시체계는 기존 통계자료들에서 발견되지 않았던 직업성질환의 발견에 유용한 통계원이며, 특히 지역의 특성과 여건을 고려하여 체계화된 시스템을 구축하여 운용한다면 더 성과가 클 것이다. Objectives: Area-based occupational disease surveillance in Kumi (KODS) was used to collect data on occupational diseases. The data was used to estimate the magnitude of the diseases, to analyze for their characteristics and to find links for their intervention and prevention. Methods: Since January 2001, occupational physicians and nurses in Occupational Health Service (OHS) have reported six major occupational diseases; occuaptional musculoskeletal disorders of the upper extremities (MSDUE), occupational dermatoses, toxic hepatitis, occupational asthma (OA), hand-arm vibration syndrome (HAVS), and occupational cancer. For the respective diseases, a reporting sheet and operational diagnostic criteria were developed by the KODS. An analysis of the KODS data, collected over a certain period, was compared with data from the Korea Labor Workers Corporation (KLWC) and the Specific Health Examination (SHE), and the incidence rates of the diseases estimated. Results: Between Jan 2001 and Apr 2002, 287 cases of the six major occupational disease were reported. Of these, there were 132 (46.0%), 100 (34.8%), 34 (11.8%), 16 (5.6%), and 5 (1.7%), cases of MSDUE, occupational dermatoses, toxic hepatitis, OA, and HAVS, repectively. But, there were no cases of occupational cancer. 33 (11.5%) of the incidence were reported via the OHS, 206 (71.7%) from health checkups, and the other 48(16.8%) from other routes. The synthetic fibers and electronic components manufacturing industries accounted for the greatest number of reported cases. With resport to occupation, the greatest numbers of incidence were reported from the elementary occupations, textile workers, assemblers, and cooks and food services worker, in that order. Of the MSDUE cases, carpal tunnel syndrome and epicondylitis were the two most common diseases. Most of the occupational dermatoses were due to contact dermatitis, with organic solvents (59%), nickel (6%), and epoxy resin (5%) accounting for the majority of these cases. All cases of toxic hepatitis were induced by dimethylformamide or dimethylacetamide, which were reported by a unique monitoring system. During same period, there were no cases claimed by workers to the KLWC, and only three cases from SHE, were identified. Using data from workers' number and surveillance, the annual incidence of MSDUE, dermatoses, hepatitis, OA, and HAVS, per 100,000 workers were 63.6, 48.2, 17.9, 7.7, and 2.4, respectively. Conclusions: These results show that an area-based surveillance system can be very effective for the collection of data on work-related diseases, at least in Kumi.

천연두 백신 접종 후 발생된 급성 심근염 1예

박옥성,김종환,이광욱,윤성훈,강동구,이승욱,조상기 朝鮮大學校 附設 醫學硏究所 2006 The Medical Journal of Chosun University Vol.31 No.2

Acute myocarditis complicating coronary vasospasm after smallpox vaccination is very rare complication that can be generally developed within less than 30 days after vaccination. Clinically and biochemically, this disorder is often mimic and highly suggestive of acute myocardial infarction. We report 21 years old man that had a history of a smallpox vaccination 3 weeks ago and prodromal symptoms(fever, malaise etc) a few days ago. hIe visited to our hospital because of abrupt onset of severe substernal chest pain, dyspnea and diaphoresis. At admission, electrocardiography was ST elevation in lead Ⅰ, aVL, V4, V5, and V6. The CK-MB level was 68 U/L, LDH level was 760 U/L, Troponin-Ⅰ was 24.64 ng/㎖, and Troponin-T was positive. 2D-echocardiograpy was normal left ventricular function, Clinically we presumed this disorder as acute myocardial infarction and we promptly performed the coronary angiography and revealed focal spasm in distal left coronary artery territory without critical stenosis in both coronary arteries. We diagnosed this disorder as coronary vasospam complicating acute myocarditis that is different with acute myocardial infarction, and we prescribed nitroglycerin and nifedipine. After discharge, he is now well without any symptoms and has been following up monthly at our outward department for 6 months.

전기자동차 운전을 위한 쵸퍼장치에 관한 연구

김용주,이훈구,이승환,강승욱,한경희 明知大學校 産業技術硏究所 1996 産業技術硏究所論文集 Vol.15 No.-

Electric vehicle which drives a motor using the battery of DC source on the car has several driving methods. The driving methods of electric vehicle are largely classified as the DC motor driving method using DC/DC converter and AC motor driving method using DC/AC converter. In this paper, several DC motor driving methods using various DC/DC converters are surveyed for the driving of electric vehicle which repeats driving and breaking frequently. As a result it is confirmed that the bilateral variable ratio chopper system for DC separately excited motor experimentally represents the best performance for the electric vehicle.

운반시간 지연에 의해 저하된 레미콘의 성능회복에 관한 기초적 연구

전충근,文學龍,황인성,양성환,한천구 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

In this paper, availability of deteriorated remicon due to delaying delivery time is discussed. According to test results, fluidity and air content of plain concrete exhibited a tendency to decline with a elapse of time. After 90 minutes since mixed, use of superplasticizer and AE admixture resulted in an increase in fluidity and air content. Adequate dosage of superplasticizer and AE adimixture is found to add with 0.4% and 0.002% respectively to restore the level of original slump and air content from loss one. Setting time of concrete exhibited an acceleration with an increase in leaving time of concrete. Compressive strength of plain concrete is enhanced with and increase of leaving time of concrete. Therefore, it is found that the use of superplasticizer with 0.4% and AE admixture with 0.002% has a desirable effect on restoring the deteriorated quality of concrete related to fluidity, air content and setting time without strength loss caused by delivery time delaying.

2자유도 PI 제어기를 이용한 BLDC 전동기의 벡터제어에 관한 연구

이종현,성낙규,이상집,이승환,오봉환,이훈구,한경희 명지대학교 산업기술연구소 2001 産業技術硏究所論文集 Vol.20 No.-

This paper describes the speed control method of BLDC Motor using TDOF PI ( Tow-degree of freedom PI ). PI control method generally used has difficulty in efficient speed control because speed response and load torque response interfere each other. It can't decrease the overshoot of motor speed w rm, and shorten the response time of load torque TL, at the same time according to the step alternation of speed reference w rm. Therefore TDOF PI is applied to BLDC Motor in order to supply these weak points of PI control method in this paper. TDOF PI can get the torque characteristic of short response time as well as stable and prompt speed adjustment by separate control for speed response and load torque response. The results from the tests of C program simulation and system construction show that TDOF PI is superior to PI control system in speed adjustment and load torque response.

The Relation Between Strength-Elonggation and Plastic Formability of the Low Carbon Steel Containing Ti-Nb

Hwan Goo Seong,Kwang Jung Kang,Bo Yeong Hur 한국표면공학회 2008 한국표면공학회 학술발표회 초록집 Vol.2008 No.-

당류계 안정화제 첨가 회수수를 사용한 콘크리트의 특성

김성환(Kim, Seong Hwan),김정빈(Kim, Jung Bin),정용(Jeong, Yong),이성연(Lee, Seong Yeon),한민철(Han, Min Cheol),한천구(Han, Cheon Goo) 한국콘크리트학회 2007 한국콘크리트학회 학술대회 논문집 Vol.2007 No.5

Fabrication and Characterization of Slag Fiber by Melt Extraction

Song, Yeong Hwan,Seong, Hwan Goo,Park, Soo Han,Ahn, Duck Kyu,Seo, Chang Hwan,Hur, Bo Young Scientific.Net 2007 Materials Science Forum Vol. No.

<P>The influence of wheel speed and melt temperature on the surface characteristics of slag fibers were examined in mineral fibers synthesized from the steel-making slag, using a modified melt extraction method, i.e. melt spinning. The synthesized fibers were characterized by optical microscope and scanning electron microscopy. It was found that the wheel speed of 700 rpm generated better quality of mineral fibers in terms of diameter and length. This was attributed to the relative extent of contact width between the flowing melt and the rotating wheel. The thickness of the slag fibers were also decreased with increasing the slag melt temperature due mainly to significant decrease in the viscosity of the slag melt. In addition, the lower melt temperature caused an increase in number of shots plus the mineral fibers.</P>