The compression-shear properties of small-size seismic isolation rubber bearings for bridges

Wu, Yi-feng,Wang, Hao,Sha, Ben,Zhang, Rui-jun,Li, Ai-qun Techno-Press 2018 Structural monitoring and maintenance Vol.5 No.1

Taking three types of bridge bearings with diameter being 100 mm as examples, the theoretical analysis, the experimental research as well as the numerical simulation of these bearings is conducted. Since the normal compression and shear machines cannot be applied to the small-size bearings, an improved equipment to test the properties of these bearings is proposed and fabricated. Besides, the simulation of the bearings is conducted based on the explicit finite element software ANSYS/LS-DYNA, and some parameters of the bearings are modified in the finite element model to reduce the computation cost effectively. Results show that all the research methods are capable of revealing the fundamental properties of the small-size bearings, and a combined use of these methods can better catch both the integral properties and the inner detailed mechanical behaviors of the bearings.

Gram-positive Rhizobacterium Bacillus amyloliquefaciens FZB42 Colonizes Three Types of Plants in Different Patterns

Ben Fan,Rainer Borriss,Wilfrid Bleiss,Xiaoqin Wu 한국미생물학회 2012 The journal of microbiology Vol.50 No.1

The colonization of three types of different plants, Zea mays, Arabidopsis thaliana, and Lemna minor, by GFP-labeled Gram-positive rhizobacterium Bacillus amyloliquefaciens FZB42 was studied in gnotobiotic systems using confocal laser scanning microscopy and electron microscopy. It was demonstrated that FZB42 was able to colonize all the plants. On one hand, similar to some Gram-negative rhizobacteria like Pseudomonas, FZB42 favored the areas such as the concavities in root surfaces and the junctions where lateral roots occurred from the primary roots; on the other hand, we clearly demonstrated that root hairs were a popular habitat to the Gram-positive rhizobacterium. FZB42 exhibited a specific colonization pattern on each of the three types of plants. On Arabidopsis, tips of primary roots were favored by FZB42 but not so on maize. On Lemna, FZB42 accumulated preferably along the grooves between epidermal cells of roots and in the concave spaces on ventral sides of fronds. The results suggested L. minor to be a promising tool for investigations on plant-microbial interaction due to a series of advantages it has. Colonization of maize and Arabidopsis roots by FZB42 was also studied in the soil system. Comparatively, higher amount of FZB42 inoculum (~108 CFU/ml) was required for detectable root colonization in the soil system, where the preference of FZB42 cells to root hairs were also observed.

Enhancement of Aggregation-Induced Emission in Dye-Encapsulating Polymeric Micelles for Bioimaging

Wu, Wen-Chung,Chen, Ching-Yi,Tian, Yanqing,Jang, Sei-Hum,Hong, Yuning,Liu, Yang,Hu, Rongrong,Tang, Ben Zhong,Lee, Yi-Ting,Chen, Chin-Ti,Chen, Wen-Chang,Jen, Alex K.-Y. WILEY-VCH Verlag 2010 Advanced Functional Materials Vol.20 No.9

<P>Three amphiphilic block copolymers are employed to form polymeric micelles and function as nanocarriers to disperse hydrophobic aggregation-induced emission (AIE) dyes, 1,1,2,3,4,5-hexaphenylsilole (HPS) and/or bis(4-(N-(1-naphthyl) phenylamino)-phenyl)fumaronitrile (NPAFN), into aqueous solution for biological studies. Compared to their virtually non-emissive properties in organic solutions, the fluorescence intensity of these AIE dyes has increased significantly due to the spatial confinement that restricts intramolecular rotation of these dyes and their better compatibility in the hydrophobic core of polymeric micelles. The effect of the chemical structure of micelle cores on the photophysical properties of AIE dyes are investigated, and the fluorescence resonance energy transfer (FRET) from the green-emitting donor (HPS) to the red-emitting acceptor (NPAFN) is explored by co-encapsulating this FRET pair in the same micelle core. The highest fluorescence quantum yield (∼62%) could be achieved by encapsulating HPS aggregates in the micelles. Efficient energy transfer (>99%) and high amplification of emission (as high as 8 times) from the NPAFN acceptor could also be achieved by spatially confining the HPS/NPAFN FRET pair in the hydrophobic core of polymeric micelles. These micelles could be successfully internalized into the RAW 264.7 cells to demonstrate high-quality fluorescent images and cell viability due to improved quantum yield and reduced cytotoxicity.</P> <B>Graphic Abstract</B> <P>Highly efficient fluorescence probes are achieved through the encapsulation of aggregation-induced emission molecules, 1,1,2,3,4,5-hexaphenylsilole (HPS) and/or bis(4-(N-(1-naphthyl) phenylamino)-phenyl)fumaronitrile (NPAFN) in the core of polymeric micelles. Bright fluorescence cell images are shown with tunable colors of green directly from HPS aggregates and red through efficient fluorescence resonance energy transfer (FRET) from HPS aggregates to NPAFN aggregates. <img src='wiley_img_2010/1616301X-2010-20-9-ADFM200902043-content.gif' alt='wiley_img_2010/1616301X-2010-20-9-ADFM200902043-content'> </P>

Based on Neural Network Information Fusion System Architecture Evolution Research in the Theory of Evolution

WU Rong-chun,Zhang Feng-li,Nie Ben-jun 보안공학연구지원센터 2014 International Journal of Multimedia and Ubiquitous Vol.9 No.8

Mn-Based Cathode with Synergetic Layered-Tunnel Hybrid Structures and Their Enhanced Electrochemical Performance in Sodium Ion Batteries

Wu, Zhen-Guo,Li, Jun-Tao,Zhong, Yan-Jun,Guo, Xiao-Dong,Huang, Ling,Zhong, Ben-He,Agyeman, Daniel-Adjei,Lim, Jin-Myoung,Kim, Du-ho,Cho, Maeng-hyo,Kang, Yong-Mook American Chemical Society 2017 ACS APPLIED MATERIALS & INTERFACES Vol.9 No.25

<P>A synergistic approach for advanced cathode materials is proposed. Sodium manganese oxide with a layered-tunnel hybrid structure was designed, synthesized, and subsequently investigated. The layered-tunnel hybrid structure provides fast Na ion diffusivity and high structural stability thanks to the tunnel phase, enabling high rate capability and greatly improved cycling stability compared to that of the pure P2 layered phase while retaining the high specific capacity of the P2 layered phase. The hybrid Structure provided a decent discharge capacity of 133.4 mAh g(-1) even at 8 C, which exceeds the reported hest rate capability for Mn-based cathodes. It also displayed an impressive cycling stability, maintaining 83.3 mAh g(-1) after 700 cycles at 10 C. Theoretical calculation and the potentiostatic intermittent titration technique (PITT) demonstrated that this hybrid structure helps enhance Na ion diffusivity during charge and discharge, attaining, as a result, an unprecendented electrochemical performance.</P>

Non-linear FEA of mechanical properties of modular prefabricated steel-concrete composite joints

Wu Cheng Long,Kan Jian Cheng,Liu Ji Ming,Mou Ben 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.40 No.4

This paper study the seismic performance of modular prefabricated SRC column to steel beam composite joint (MPCJ) under static loading. Numerical modeling of MPCJs with three different beam-end connections was carried out in ABAQUS. Results of the numerical calculation were compared with existing quasi-static test results to verify the feasibility of the numerical model. The model was then used to analyze changes in the moment-rotation relation, failure mode, ductility, stiffness, and bolt stress in the joint between the column and joint module. Besides, stress distributions in the joints were analyzed along different stress paths. Under monotonic loading, the mechanical performance of the MPCJ is significantly affected by the beam end connection mode. Failure of the MPCJ mainly occurs at the beam end connection, thus, the aim of keeping the plastic hinge away from the joint core and preventing shear failure is achieved. Furthermore, the maximum story drift ratio is 3.9–5 times greater than the recommended limit, which indicates good ductility and deformation performance. The MPCJ of the three-beam end connection methods is all semi-rigid connections. The beam end structure will have a large influence on the bolt tension and stress distribution. According to the test research results, a nonlinear model with three parameters including joint cover plate cantilever section length, flange connecting plate thickness and flange connecting plate weld length was established. The theoretical calculation results was consistent with the results of the numerical simulation. MPCJs can be designed based on the proposed theoretical calculation formula.

사회적 상호작용을 증진시키는 지하 공공공간 디자인을 위한 사용자 행태연구 - 부산역의 지하공간을 중심으로 사례연구 -

오거붕(Wu, JuPeng),장신웨(Zhang, XinYue),박수빈(Park, Soo-Ben) 한국주거학회 2023 한국주거학회 학술대회논문집 Vol.35 No.1

This study investigates the rest area and the transfer access area of Busan Station, Line 1 of the urban subway in Busan, Korea, and grasps the morphology of people in the two areas. Based on the current situation and behavior of people using the spaces, the study proposes improvement plans for the subsequent design of the spaces. This study was conducted through on-site observation surveys. The main findings include that there is no major difference in people’s use of space between midweek and weekend. Among the morning and afternoon time periods, the frequency of use was higher in the afternoon than in the morning. Among the types of behaviors, in addition to the basic walking behavior, there were also small behaviors that, although small in number, would make the space more convenient for those using it if the furniture or design elements in the space were slightly changed.

Iso-migrastatin Titer Improvement in the Engineered Streptomyces lividans SB11002 Strain by Optimization of Fermentation Conditions

Xueyun Wu,Zhengbin Lv,Yaozhou Zhang,Dong Yang,Xiangcheng Zhu,Zhinan Xu,Zhiyang Feng,Ben Shen 한국생물공학회 2010 Biotechnology and Bioprocess Engineering Vol.15 No.4

The heterologous production of iso-migrastatin (iso-MGS) was successfully demonstrated in an engineered S. lividans SB11002 strain, which was derived from S. lividans K4-114, following introduction of pBS11001,which harbored the entire mgs biosynthetic gene cluster. However, under similar fermentation conditions, the iso-MGS titer in the engineered strain was significantly lower than that in the native producer - Streptomyces platensis NRRL 18993. To circumvent the problem of low iso-MGS titers and to expand the utility of this heterologous system for iso-MGS biosynthesis and engineering, systematic optimization of the fermentation medium was carried out. The effects of major components in the cultivation medium,including carbon, organic and inorganic nitrogen sources,were investigated using a single factor optimization method. As a result, sucrose and yeast extract were determined to be the best carbon and organic nitrogen sources, resulting in optimized iso-MGS production. Conversely, all other inorganic nitrogen sources evaluated produced various levels of inhibition of iso-MGS production. The final optimized R2YE production medium produced iso-MGS with a titer of 86.5 mg/L, about 3.6-fold higher than that in the original R2YE medium, and 1.5 fold higher than that found within the native S. platensis NRRL 18993 producer.

Regional land cover patterns, changes and potential relationships with scaled quail (Callipepla squamata) abundance

노백호,X. Ben Wu,Fred E. Smeins,Nova J. Silvy,Markus J. Peterson 한국생태학회 2015 Journal of Ecology and Environment Vol.38 No.2

A dramatic decline in the abundance of the scaled quail (Callipepla squamata) has been observed across most of its geographic range. In order to evaluate the influence of land cover patterns and their changes on scaled quail abundance, we examined landscape patterns and their changes from the 1970s to the1990s in two large ecoregions with contrasting population trends: (1) the Rolling Plains ecoregion with a significantly decreased scaled quail population and (2) the South Texas Plains ecoregion with a relatively stable scaled quail population. The National Land Cover Database (NLCD) and the U.S. Geological Survey’s (USGS) Land Use/Land Cover data were used to quantify landscape patterns and their changes based on 80 randomly located 20×20 km2 windows in each of the ecoregions. We found that landscapes in the Rolling Plains and the South Texas Plains were considerably different in composition and spatial characteristics related to scaled quail habitats. The landscapes in the South Texas Plains had significantly more shrubland and less grassland-herbaceous rangeland; and except for shrublands, they were more fragmented, with greater interspersion among land cover classes. Correlation analysis between the landscape metrics and the quail-abundance-survey data showed that shrublands appeared to be more important for scaled quail in the South Texas Plains, while grassland-herbaceous range¬lands and pasture-croplands were essential to scaled quail habitats in the Rolling Plains. The decrease in the amount of grassland-herbaceous rangeland and spatial aggregation of pasture-croplands has likely contributed to the population decline of scaled quails in the Rolling Plains ecoregion.

Two type III polyketide synthases from Polygonum cuspidatum: gene structure, evolutionary route and metabolites

Guo, Yan-Wu,Guo, Hui-Li,Li, Xing,Huang, Li-Li,Zhang, Bo-Ning,Pang, Xiao-Bin,Liu, Ben-Ye,Ma, Lan-Qing,Wang, Hong 한국식물생명공학회 2013 Plant biotechnology reports Vol.7 No.3

In our recent work (Ma et al., in Planta 229(3):457-469, 2009a and 229(4):1077-1086, 2009b), two three-intron type III PKS genes, PcPKS1 and PcPKS2, were isolated from Polygonum cuspidatum Sieb. et Zucc. Phylogenetic and functional analyses revealed PcPKS1 is a three-intron chalcone synthase (CHS) gene, and PcPKS2 is found to be a three-intron benzalacetone synthase (BAS) gene. The regular CHS encoded by a single intron gene have not been isolated and characterized from P. cuspidatum. In this work a further CHS with one intron (PcPKS3) and a stilbene synthase (STS) gene with three-intron (PcPKS5) were isolated and characterized by functional and phylogenetic analyses. In comparison with PcPKS1, a bifunctional enzyme with both CHS and BAS activity, the enzymatic product of recombinant PcPKS3 was naringenin, bis-noryangonin (BNY) and 4-coumaroyltriacetic acid lactone (CTAL) occurred as side products. The PcPKS5 synthesized resveratrol and a trace amount of naringenin from p-coumaroyl-CoA. To our knowledge, PcPKS5 is the first reported three-intron STS gene in flowering plants. In this work, we speculated that this involved a possible evolutionary route of plant-specific type III PKS superfamily in P. cuspidatum.