http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박재환,홍국선,박순자,Park, Jae-Hwan,Hong, Guk-Seon,Park, Sun-Ja 한국재료학회 1996 한국재료학회지 Vol.6 No.4
완화형 강유전체의 가장 대표적인 PMN계에서 첨가제의 종류와 함량, 측정온도, 인가 전계의형태 등의 변화에 따른 전계인가 변화특성을 광법위하게 조사하였다. Columbite precursor법에의해 분말을 준비하고 고상소결방법에 의하여 모든 시편을 제조하였다. 순수한 PMN에 첨가제로서 PbTiO3와 Pb(Zr, Ti)O3를 첨가한 경우에 완전한 perovskite 구조의 고용체가 형성되었음을 알 수 있었다. T$\varepsilon$max이상에서는 변위의 이력이 크게 발생하는 강유전체의 거동을 보여주었다. 양방향으로 전계를 인가하여 변위를 이용하면 발생 strain은 실온 근방에서 온도에 대하여 안정적이지만 단방향 전계에 따른 변위는 온도에 따라 크기가 변한다는 것을 알 수 있었고 유전상수가 큰 경우가 전왜의 크기 또한 큰 것을 알 수 있었다. 0.9MN-0.1PT와 0.8PMN-0.2PZT의 경우 최대가 되는 온도는 유전율이 최대가 되는 온도보다 더 낮은 온도에서 나타났다.
강유전체 세라믹스에서의 전계인가에 따른 Polarization 및 Strain의 동시 측정
박재환,홍국선,박순자,Park, Jae-Hwan,Hong, Guk-Seon,Park, Sun-Ja 한국재료학회 1996 한국재료학회지 Vol.6 No.2
60Hz의 교류전계를 사용하는 종래의 Sawyer-Tower회로를 응용하여 0.1Hz의 직류 개념(quasi-DC)의 전계를 이용한 polarization과 strain의 동시 측정을 실시하였다. 측정의 대상으로는 강유전체로서 압전변형을 보이는 재료 중 가장 대표적인 PZT 계와 완화형 강유전체로서 전왜변형을 보이는 재료 중 가장 대표적인 PZT계와 완화형 강유전체로서 전왜변형을 보이는 재료 중 가장 대표적인 PMN계로 하였다. 0.1Hz한 주기의 전계 인가로 이력곡선을 측정할 수 있어서 시편의 발열을 크게 억제할 수 있었고 정확한 온도에서의 측정이 가능하였다. 또한 양방향 전계뿐 아니라 단방향 전계, 바이어스 전계도 인가할 수 있기 때문에 종래의 Sawyer-Tower 방법에서는 얻을 수 없는 강유전성에 관한 다양한 정보를 얻을 수 있었다. 이 방법은 또한 0.1Hz의 전계 하에서 얻을 수 없는 강유전성에 관한 다양한 정도를 얻을 수 있었다. 이 방법은 또한 0.1Hz의 전계 하에서 이력곡선이 측정되는 한 주기 동안에 시편에 부착된 스트레인 게이지를 통해 전계인가에 따른 strain 변화를 동시에 측정할 수 있기 때문에 strain과 polarization의 상관관계를 정확히 조사할 수 있다는 장점이 있다. PMN계에서 인가되는 전계의 넓은 범위에서 전왜정수 Q값을 연속적으로 구할 수 있었다.
Raman 분광법을 이용한 $Li_{1-X}Al_{2X}Ta_{1-X}O_3$ 고용한계 분석
김정돈,홍국선,주기태,Kim, Chong-Don,Hong, Kug-Sun,Joo, Gi-Tae 한국분석과학회 1992 분석과학 Vol.5 No.1
강유전체인 $LiTaO_3$ 소재는 SAW filters나 IR sensors의 기본재료로 사용되고 있다. Dopant로서 $Al_2O_3$를 $LiTaO_3$에 일부 치환함으로써 유전 특성을 변화시키고 특히 용융점을 낮춤으로써 단결정 제조를 용이하게 한다. X-선 회절분석에 의한 격자상수 변화와 Raman spectroscopy의 band broadening을 측정한 결과 $LiTaO_3$에 대한 $Al_2O_3$의 고용한계가 $Li_{1-X}Al_{2X}Ta{1-X}O_3$에서 X=0.25mol이었으며, 고용한계 이상에서는 2차상인 $Al_2O_3$상이 XRD로 관찰되었다. Grain size에 의한 Raman band의 broadening을 고려하기 위하여 단결정과 소결체 $LiTaO_3$를 측정 비교하였다. The upper limit of solid solution of $Al_2O_3$ in $LiTaO_3$ was investigated using X-ray diffraction and Raman spectroscopy. By substituting cations in $LiTaO_3$ with $Al^{3+}$, the melting temperature was lowed and the ferroelectric properties can be improved. It is easier at lower temperature to fabricate the single crystal used for SAW filters and IR sensors. From the measured lattice constants and Raman band broadening, the solubility limit was X=0.25mol in $Li_{1-X}Al_{2X}Ta{1-X}O_3$, above which $Al_2O_3$ was obsered as a second phase. The Raman band of sintered $LiTaO_3$ was compared with that of the single crystal to see the effect of grain size on the band broadening.
분말 x선 회절을 통한 $(1-x)Ba(Mg_{1/3}Ta_{2/3})O_3-xLa(Mg_{2/3}Ta_{1/3})O_3$복합페로브스카이트 고용체의 양이온규칙화 및 격자비틀림 분석
윤혁준,고경현,홍국선,김환,Youn, Hyuk-Joon,Ko, Kyung-Hyun,Hong, Kug-Sun,Kim, Hwan 한국세라믹학회 1997 한국세라믹학회지 Vol.34 No.2
새로운 복합페로브스카이트계 고용체 (1-x)Ba(Mg1/3Ta2/3)O3-xLa(Mg2/3Ta1/3)O3(x=0.0-1.0)를 설계하고 조성에 따른 고용체의 결정구조의 변화 및 MPB(Morphotropic Phase Boundary)를 분말 XRD를 이용하여 분석하였다. 초격자회절선의 변화로부터 MBT에 10mol%의 LMT를 치환함에 따라 1:2에서 1:1로의 규칙화타입의 전이가 일어남을 알 수 있었다. 면심입방정구조 영역(0.1<x<0.7)내에서 1:1 규칙화를 나타내는 초격자회절선의 상대강도의 변화는 B자리 양이온인 Mg. Ta의 부분규칙화배열의 변화로부터 설명할 수 있었다. x>0.8조성의 경우, 주회절선의 피이크분리 및 새로운 회절선들로부터 격자비틀림의 형태가 단사정임을 알 수 있었다.
적층형 ZnO바리스터의 내부전극과 Bi$_2$O$_3$ 와의 반응
김영정,김환,홍국선,이종국,Kim, Young-Jung,Kim, Hwan,Hong, Kook-Sun,Lee, Jong-Kook 한국세라믹학회 1998 한국세라믹학회지 Vol.35 No.11
Reactions between Ag-Pd internal electrode materials and{{{{ { {Bi }_{2 }O }_{3 } }} in multilayer chip varistor were in-vestigated. For more than 1 mol%{{{{ { {Bi }_{2 }O }_{3 } }} in varistor composition internal electrode structure was destroyed due to the reaction between internal electrode and{{{{ { {Bi }_{2 }O }_{3 } }} But for typical varistor compositions (below 1 mol% of{{{{ { {Bi }_{2 }O }_{3 } }} content) microstructural changes around the internal electrode were not observed. However SEM-EDS and TEM-EDS analysis showed the uneven distribution of{{{{ { {Bi }_{2 }O }_{3 } }} in the internal electrode which was due to the migration of{{{{ { {Bi }_{2 }O }_{3 } }} to the electorde during sintering. As a results the nonlinear coefficient of multilayer varistor showed very large distribution as well as the breakdown voltage.
최한철 ( Han Cheol Choe ),홍국선 ( Kook Sun Hong ),고영무 ( Yeong Mu Ko ),김병옥 ( Byung Ock Kim ) 대한금속재료학회 ( 구 대한금속학회 ) 2006 대한금속·재료학회지 Vol.44 No.6
The aim of this investigation was to analyze surface of clinically failed dental implant fixture in order to determine possible causes of failure. The failed implants were classified into three groups; 3 and 5 month used implant, 19 and 60 month used implant, and fractured implant, after implantation for 33 month and 120 month in patient jaws. The topography and surface chemical composition were studied with energy dispersive x-ray spectroscopy(EDS) and field emission scanning electron microscope(FE-SEM) to analyze elements on the surface of flank and bottom of thread. Evaluations were performed at the upper, middle and lower implant fixture. From surface observation of 3 and 5 month used implant, contaminants were detected in the middle and lower part of implants. Overall, foreign elements such as silicon, carbon, oxygen, zinc, sulfur, zirconium, and chloride were detected in failed implants. From surface observation of 19 and 60 month used implant, the corrosion was accelerated at the bottom of thread that was accumulated chloride. Corrosion products showed in the bottom of thread including dissolution elements, such as Au, Cu, Ag, from suprastructure of dental implant system. From surface observation of fatigue fractured implants, the crack were nucleated in the bottom of thread and the crack of corrosion fatigue was predominantly propagated. The corrosion products including chloride were found opposite side of starting point of corrosion fatigue crack. We could find the fatigue striation and estimate the dimple fracture of implants.