http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임플란트의 직경과 길이 변화가 초기 안정성에 미치는 영향
조재명,조욱,윤미정,정창모,전영찬,Cho, Jae-Myoung,Cho, Uk,Yun, Mi-Jung,Jeong, Chang-Mo,Jeon, Young-Chan 대한치과보철학회 2009 대한치과보철학회지 Vol.47 No.3
연구목적: 충분한 골질과 골량은 임플란트의 조기 실패 방지와 초기 안정성을 위해서 중요한 사항으로 알려져 있다. 임플란트 길이나 직경이 초기 안정성에 미치는 영향을 연구한 다수의 실험들이 골과의 접촉면적을 달리하였기 때문에 직경과 길이만이 초기 안정성에 미치는 실제 영향을 파악하는데 한계가 있다. 이에 유사한 표면적을 가지는 임플란트를 통하여 길이와 직경 상대적 변화가 초기 안정성에 미치는 영향을 알아보고자 하였다. 연구 재료 및 방법: 골질에 따라 피질골과 해면골의 두께가 다른 4종류의 폴리우레탄 모형골을 임플란트 식립에 사용하였다. 유사한 표면적과 형태를 가지나 직경과 길이가 서로 다른 임플란트 ($3.5{\times}13.0\;mm$, $4.0{\times}11.5\;mm$, $4.5{\times}10.0\;mm$, $5.0{\times}8.5\;mm$) 10개를 식립하고 식립 회전력과 공진 주파수를 측정하였다. 결과 및 결론: 초기 안정성에 영향을 미치는 주 요소는 골질이었으며 (P < .05), 식립 회전력과 공진 주파수 모두 골질이 우수할수록 높은 측정치를 보였다. 2. D1, D2, D3 모형골에서 임플란트의 직경이 커지고 길이가 짧아짐에 따라 공진 주파수는 유의한 차이를 보이지 않았으나 (P >.05), 식립 회전력은 증가하였다 (P <.05). 3. D4 모형골에서는 임플란트의 직경이 커지고 길이가 짧아짐에 따라 공진주파수와 식립 회전력 모두 감소하였다 (P <.05). 이상의 결과로부터 골질이 양호한 조건에서는 길이가 짧더라도 직경이 큰 임플란트의 사용이 초기 안정성 측면에서 부가적 수술의 대안이 될 수 있을 것으로 생각된다. Statements of problem: Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the actual effect of dimensional change in implant geometry on initial stability. Purpose: The purpose of the current study was to investigate the influence of diameter and length changes on initial stability of implants. Material and methods: Four types of dummy bone (D1, D2, D3 and D4) consisted of cortical and cancellous layers with different thickness were simulated. Implants which had similar surface area to each other ($3.5{\times}13.0-mm$, $4.0{\times}11.5-mm$, $4.5{\times}10.0-mm$, $5.0{\times}8.5-mm$) were inserted in dummy bones. Implant stability as a function of peak insertion torque and resonance frequency values were recorded for each implant. Results: 1. Bone quality was a major influential factor to achieve initial stability (P <.05). 2. In D1, D2 and D3 dummy bones, implant stability quotient values were not significantly different to each other (P >.05), however insertion torques were increased with wider and shorter implants (P <.05). 3. In D4 dummy bone, implant stability quotient values and insertion torques were decreased with wider and shorter implants (P <.05). Conclusion: From a point of view of initial stability, it is suggested that use of wide and short implant may be helpful in avoiding bone augmentation procedures in area of adequate bone quality.
최신 평균해면모델 및 전지구 중력장모델을 이용한 한반도 주변 지형류의 추정
조재명(Cho, Jae Myoung),윤홍식(Yun, Hong Sik),이미란(Lee, Mi Ran),조현준(Cho, Hyun Joon) 한국측량학회 2011 한국측량학회 학술대회자료집 Vol.2011 No.4
Global MSS(Mean Sea Surface) Model based on satellite altimetry, Earth"s gravity, ocean depth, tidal and variety of data. MSS Model used in the calculation of earth observation satellite data by the obsevation that most global data because the observations in order to achieve long-term needs. Therefore, the data used to calculate according to the type observation period and there are differences in the precision and accuracy. In this study, the estimation of geostrophic velocity around the Korean peninsula using the sea surface topography calculated from the most recent MSS_CNES_CLS10, DTU10MSS models and EGM2008 Earth Gravity Model.
조재명(Cho, Jae Myoung),최민재(Choi, Min Jae),윤홍식(Yun, Hong Sik),이동하(Lee, Dong Ha),조정호(Cho, Jung Ho),안기덕(Ahn, Ki Deok),김종완(Kim, Jong Wan) 한국측량학회 2013 한국측량학회 학술대회자료집 Vol.2013 No.4
GPS를 이용한 측위 정밀도가 향상되기 시작하면서 GPS안테나의 정확한 옵셋 결정을 위한 캘리브레이션이 중요시되고 있다. 본 연구에서는 국토지리정보원에서 운용하고 있는 GPS 상시관측소 성과의 정밀도 향상을 위하여 GPS 안테나에 대한 절대캘리브레이션을 실시하고 그 결과를 비교 평가하였다. 국토지리정보원 GPS 위성기준점 중 4개를 선정하여 안테나 절대캘리브레이션을 실시한 결과와 IGS 표준 안테나 모델과는 평면 최대 1.1mm, 수직 최대 1.6mm의 옵셋 차이가 나타났다. 한편, 절대캘리브레이션에 의하여 계산된 안테나 위상중심변동(PCV)모델 적용결과, IGS 표준 위상중심변동 모델을 적용한 성과와 평면 최대 2.8mm, 수직최대 10.0mm의 차이가 나타나는 것으로 분석됐다. The GPS positioning accuracy has been calibrated to determine the exact offset of the GPS antenna using is beginning to be improved. In this study, in order to improve the accuracy of GPS satellite reference point achievements that are operated by the National Geographic Information Institute to carry out absolute calibration of GPS antenna, we compared the results were evaluated. Results by selecting four of the reference point of the GPS satellite by National Geographic Information Institute, absolute calibration of the antenna was performed, there was a difference between the maximum offset plane 1.1mm, 1.6mm of maximum antenna vertically within IGS standard antenna model. On the other hand, the result of changes in the antenna phase center variation(PCV) model, that the difference between 2.8mm maximum plane, 10.0mm maximum vertical results and applying the model variation phase center IGS standard antenna model will be displayed, which is calculated by the calibration absolute we found.
LiDAR 센서 기반 모바일맵핑시스템을 이용한 국가기본도 수정, 갱신 실험
조재명(Cho, Jae Myoung),윤홍식(Yun, Hong Sic),이미란(Lee, Mi Ran),조현준(Cho, Hyun Joon) 한국측량학회 2010 한국측량학회 학술대회자료집 Vol.2010 No.4
Recently the development of digital based measurement sensor with which a variety of surveying equipment and methods are being developed. In the field of aerial mapping using GPS, INS and Digital Camera instead of Film based Camera. In case of aerial photogrammetry for mapping, it is effective on wide area. But it is ineffective on narrow area. Therefore, the research experimented that used LiDAR sensor based mobile mapping systems for modify and update about region of Suwon and Yeouido. From these results a possibility and an effectiveness analyzed and evaluated LiDAR sensor based mobile mapping systems.