http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
해상 안전을 위한 X밴드 능동형 레이더 반사기에 관한 연구
정종혁,김남호,양규식 한국정보통신학회 1999 한국정보통신학회논문지 Vol.3 No.4
여러 가지 형태의 수동 레이더 반사기가 사용되고 있지만, 해양의 악조건 즉, 파도의 높이나 해풍의 속도에 견뎌내기 위한 크기는 한정되어질 수밖에 없으므로 유효 반사 단면적은 제한되어질 수밖에 없다. 따라서, 저전력, 저가격으로 응답의 신뢰성를 높일 수 있는 능동장치의 필요성을 검토하게 되었다. 능동형 레이더 반사기는 마이크로웨이브 증폭기와 분리된 송수신 안테나로 구성되고 수신된 레이더 신호를 자동적으로 증폭해서 재전송한다. 해상의 악조건에서도 소형선박이나 항해표지에 대한 레이더 응답의 명확성을 개선시키므로, 해상항해에서의 안전성을 직접적으로 증가시킬 것이다. There are several improved designs of passive radar reflector available, but their performance is ultimately limited by the cross-section area and this is governed by the size of the buoy and the acceptable windage. Therefore it is needed to investigate the low-cost, low power, a active device that can be improve the reliability of response. Active Radar Reflector(AAR) consists of a microwave amplifier with separate receive and transmit antennas. It is a device which automatically transmits a signal in response to an interrogating signal received. It was intended to improve the consistency of the radar return from the buoy and the small craft, particularly in poor sea conditions. And it directly improves safety of navigation at sea.
정종혁,이병하,Jung, Jong-Hyuk,Lee, Byung-Ha 한국세라믹학회 2010 한국세라믹학회지 Vol.47 No.4
The objective of the present research is to develop the body for Temmoku Teabowl, in order to manufacture the Temmoku Teabowl with the characteristics of Jian Ware, which has a rich dark brown color and has been extolled as the representative fine article of Temmoku Teabowl. Basic composition was first determined using domestically produced clay, kaolin and pottery stone as starting materials. After the addition of calcinated Hwangto, which is rich in iron, the mixture was subjected either to oxidizing calcination at $1260^{\circ}C$ to produce a body with a color suitable for Hanam ware or to reducing calcination at $1230^{\circ}C$ to produce a body with a color suitable for Jian Ware. The bodies produced in this research showed the strength value of $380{\sim}36\;Kg/cm^2$, the specific gravity of 2.304~2.310, the absorption ratio of 4.103~3.897, and the porosity of 8.608~8.207%.
전신성 홍반 루푸스 환자에서 동반된 가역적 후두부 뇌병증 증후군 1예
정종혁,이창훈,이유민,안선호,송주흥,이명수 대한내과학회 2011 대한내과학회 추계학술대회 Vol.2011 No.1
배경: 가역적 후두부 뇌병증 증후군(Posterior reversible encephalopathy,이하 PRES)은 두통,의식변화,경련,시력 이상 등의 증상과 신경 방사선 영상에서 두정-측두-후두엽 후측 영역에 백색질이나 피질에 가역적인 부종이 특징인 질환으로, 주로 갑작스런 혈압상승, 신부전,산욕기 자간 증,수분 축적,전신 홍반성 루푸스 등의 자가 면역 질환 및 cyclophosphamide, cyclosporine 등의 면역 억제 치료와 연관되어 발생하는 것으로 알려져 있다. 증례: 과거 특이 병력 없는 47세 여자 환자로내원 2개월 전부터 발생한 전신통 및 전신 쇠약감을 주소로 내원하여 시행한 검사 상 폐와 신장(type III or IV)을 침범한 전신 홍반성 루푸스를 진단하여 스테로이드 및 hydroxychloroquine, cyclophophamide pulse therapy를 시행 하였다. 57병일째 환자는 두 차례 약 3분간의 전신 간대 발작 및 안구 편향을 보였다. 입원기간 동안 생체증후는 평균적으로 혈압 130/80 mmHg,맥박 68회/분 정도 관찰되었다. Brain MRI을 시행하였고, T2와 FLAIR image상에서 parieto-occipital lobe와 basal ganglia에 BBB disruption에 의한 vasogenic edema로 asymmetrical diffuse high signal intensities lesion이 관찰되어 증상과 MRI finding으로 Posterior reversible encephalopathy syndrome을 진단할 수 있었다. BBB disruption의 원인으로 생각한 cyclophophamide를 중단하고, 63병일에 시행한 추적 MRI상 이전에 관찰되었던 병변들은 대부분 사라졌다. 결론: PRES는 고혈압성 뇌병증 상태의 환자와 혈압상승이 동반된 중추 신경 감염성 질환이나 두개강내 종양 및 경련성 질환과의 감별이 중요하며, 자세한 병력 청취를 통한 빠른 진단과 함께 혈압 조절,원인 약의 중단 및 항경련제의 투여, 혈액 투석과 같은 보존적 치료가 신속히 이루어져야 한다. 대부분 적절한 조기 대응으로 수 일이나 수주 내에 정상적인 회복을 기대할 수 있으므로 루푸스 환자에서 신경학적 증상을 보일 경우 감별진단으로 PRES를 포함시켜야 하며 자기공명영상을 조기에 시행하는 것이 진 단에 도움이 된다. 본 저자들은 cyclophosphamide 치료 중인 루푸스 신염 환자에서 발생한 PRES 1예를 경험하여 성공적으로 치료하였기에 보고하는 바이다.
정종혁,김태곤,고진환,Jung, Jonghyuk,Kim, Taekon,Koh, Jinhwan 한국전기전자학회 2013 전기전자학회논문지 Vol.17 No.2
본 논문은 연관된 합성기로부터 생성된 음성 경고음의 모델링에 관한 실험적 연구이다. 112명의 피실험자를 대상으로 심리적-육체적인 접근방법으로 4가지의 실험이 수행 되었다. 첫 번째 실험은 함성 경고음의 위급도를 지각하는 것을 모델링하여 6개의 음성-비음성 요소들을 구분하였다. 두 번째부터 네 번째의 실험은 위급도 지각의 주관적 변화와 객관적으로 계량화 할 수 있는 파라미터를 수치화 하였다. 이 논문은 응급성의 정도를 구분하는 것이 필요한 음성 합성 경고시스템의 설계에 적용될 수 있다. This paper presents an experimental study of the factors modulating the urgency perception of voice alarm generated by concatenative synthesizers. Four experiments were conducted using psycho-physical approach in which 112 participants made magnitude estimation for urgency perception of various voice alarm stimuli. Experiment 1 identified 6 acoustic and non-acoustic factors modulating the perceived urgency of synthesized voice alarm. Experiment 2, 3 and 4 quantified the relations between the objective changes in each of the quantifiable parameters and the subjective changes in urgency perception. This research has implications for the design and implementation of synthesized voice alarm systems where urgency mapping is required.
정종혁,권원태 대한기계학회 2010 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.24 No.5
Electrical discharge machining (EDM) is one of the most extensively used non-conventional material removal processes. The Taguchi method has been utilized to determine the optimal EDM conditions in several industrial fields. The method, however, was designed to optimize only a single performance characteristic. To remove that limitation, the Grey relational analysis theory has been used to resolve the complicated interrelationships among the multiple performance characteristics. In the present study, we attempted to find the optimal machining conditions under which the micro-hole can be formed to a minimum diameter and a maximum aspect ratio. The Taguchi method was used to determine the relations between machining parameters and process characteristics. It was found that electrode wear and the entrance and exit clearances had a significant effect on the diameter of the micro-hole when the diameter of the electrode was identical. Grey relational analysis was used to determine the optimal machining parameters, among which the input voltage and the capacitance were found to be the most significant. The obtained optimal machining conditions were an input voltage of 60V, a capacitance of 680pF, a resistance of 500Ω, the feed rate of 1.5μm/s and a spindle speed of 1500rpm. Under these conditions, a micro-hole of 40μm average diameter and 10 aspect ratio could be machined.