http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장연수,Jang, Yeon Soo Korean Society of Civil Engeneers 1992 대한토목학회논문집 Vol.12 No.2
본 논문에서는 일계(一階) 및 이계(二階) 신뢰해석법(信賴解析法)을 이용 흙속으로의 오염물 이동을 해석할 수 있는 모델을 개발하였으며 오염이동 모델은 1차원 차분법과 2차원 유한요소법을 이용하였다. 일계(一階) 및 이계(二階) 신뢰성 해석법은 흙의 특성을 제한하는 가정사항이 필요치 않은 확률모델이며 본 해석으로부터 얻어지는 예민도(sensitivity)는 확률해에 큰 영향을 미치는 입력 매개변수에 대한 정보를 제공한다. 1차원 오염물 이동 신뢰성 해석으로 신뢰성해석 프로그램의 유용성과 정밀성을 검증하였으며, 연속 오염원의 2차원 해석과 농도 극한상태 함수를 이용하여 오염물 이동 경로상 지점의 입력변수가 신뢰성해석의 확률해(解)에 미치는 영향을 검토하였다. The first and second-order reliability method(FORM and SORM) is presented using one dimensional finite difference and two dimensional finite element transport models. FORM and SORM can be used without any restrictive assumptions about the properties of the media, and the sensitivity information obtained as part of these analyses is used to identify the parameters which have major influence on the estimate of probability. The reliability analysis of transport in a one-dimensional domain is used to test the robustness of the reliability code and to evaluate the accuracy of the reliability method. A continuous source 2-D example with a concentration threshold limit state function is used to evaluate the influence of the parameters in the location of interest on the reliability solution.
장연수,Jang, Yeon-Su 한국기술사회 2008 技術士 Vol.41 No.3
Recently problems of soil and groundwater contamination occur in major construction sites of highway, dam and railways. Contaminants of oil fuels are also detected in the former fuel storage facilities of railroad station and army troops of transportation, etc. These facilities are planned as the sites of commercial infrastructures after restoration from pollutants by the law of soil environment conservation of Korea. In this manuscript, the contents of soil environment conservation law including soil assessment and restoration technology are introduced. Recent changes of soil environment area are also analyzed.
장연수,이창훈,Jang, Yeonsoo,Lee, Changhoon 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.5
One of the effective methods for angular deception against monopulse radar is a cross eye technique. The typical cross eye technique can cause significant angular errors to monopulse radar by using two transceivers which transmit the signals with opposite phases. However, typical cross eye systems have high complexity of implementation because two transceivers should be installed with enough distance on the platform. In this paper, we propose a new cross eye technique with single transceiver based on the multipath effect. Then, angular deception performance of the proposed technique is analyzed.
주상시험장치를 이용한 해안 폐기물 매립장 지반토지 오염물 흡착능에 관한 연구
장연수,한성길,김수삼,Jang, Yeon-Su,Han, Seong-Gil,Kim, Su-Sam 한국지반공학회 1997 지반 : 한국지반공학회지 Vol.13 No.4
본 논문은 해안 매립장의 해성점토와 그 기반 풍화토가 갖는 침출수 중의 무기물, 중금속 및 유기물에 대한 오염물 이동성 저감능력을 실내 주상실험에 의하여 조사하였다. 그 결과 무기물 인 칼릅의 경우 해성점토층의 흡착능이 하부 풍화토에 비하여 큰 것으로 나타났으며 중금속인 납과 카드윰의 경우는 매립장 실제 배출 농도보다 큰 농도에서도 완전 흡착되는 것으로 나타났다. 유기성 폐기물에 대한 실험결과 그 흡착능이 무기물이나 중금속에 비하여는 떨어지나 침출수내의 난분해성 유기물질을 기반 점토 및 풍화토가 저감시킬 수 있는 것으로 나타났다. In this paper, the retardation capacity of marine clay and weathered soil of seashore waste landfill is analyzed by using a laboratory column apparatus for organic and inorganic components which can represent the components of the leachate of municipal waste landfill. The results show that sorption capacity marine clay for potassium is larger than that of weathered soil. Lead and cadmium are adsorbed completely at concentrations higher than the real concentrations developed in the landfill. The bottom soils of seashore landfill can also retard some nondegradable components of organics although their sorption capacities for organics were less than those for inorganics.
정전 용량형 SP4T RF MEMS 스위치 구동용 4채널 승압 DC-DC 컨버터
장연수(Yeonsu Jang),김현철(Hyeon Cheol Kim),김수환(Suhwan Kim),전국진(Kukjin Chun) 대한전자공학회 2009 電子工學會論文誌-SD (Semiconductor and devices) Vol.46 No.2
본 논문에서는 전하 펌프(charge pump) 방식의 전압 더블러(voltage doubler) 구조를 이용한 4채널 DC-DC 컨버터 개발을 소개한다. 무선 통신 트랜시버 내부에 위치하는 FEM(Front End Module)에서의 사용을 목표로 연구 개발 중인 정전 용량형 SP4T RF MEMS 스위치 구동용 DC-DC 컨버터를 개발하였다. 소비 전력이 적으며 작은 면적을 차지하는 전하 펌프 구조와 10㎒ 스위칭 주파수를 이용하여 3.3V에서 11.3±0.1V, 12.4±0.1V, 14.1±0.2V로 승압한다. 전압 레벨 변환기(Voltage level shifter)를 이용하여 DC-DC 컨버터의 출력을 3.3V 신호로 선택적으로 온오프(on/off) 할 수 있으며 정전 용량형 MEMS 기기에 선택적으로 전달할 수 있도록 구현하였다. 칩 외부에 수동 소자를 추가하지 않고 칩 내부에 CMOS 공정 중에 제작된 저항과 커패시터만으로 원하는 출력을 낼 수 있도록 설계하였다. 전체 칩의 크기는 패드를 포함하여 2.8ⅹ2.1㎟이며 소비 전력은 7.52㎽, 7.82㎽, 8.61㎽이다. This paper presents a step up four channel DC-DC converter using charge pump voltage doubler structure. Our goal is to design and implement DC-DC converter for capacitive SP4T RF MEMS switch in front end module in wireless transceiver system. Charge pump structure is small and consume low power. 3.3V input voltage is boosted by DC-DC converter to 11.3±0.1V, 12.4±0.1V, 14.1±0.2V output voltage with 10㎒ switching frequency. By using voltage level shifter structure, output of DC-DC converter is selected by 3.3V four channel selection signals and transferred to capacitive MEMS devices. External passive devices are not used for driving DC-DC converter. The total chip area is 2.8ⅹ2.1㎟ including pads and the power consumption is 7.52㎽, 7.82㎽, 8.61㎽.
모노펄스 센서에 대한 크로스 아이 재밍기법의 각도기만 성능 실험
장연수(Yeonsoo Jang),박진태(Jintae Park),이창훈(Changhoon Lee),김인선(In-sun Kim),김기백(Ghiback Kim),조상왕(Sangwang Cho) 한국전자파학회 2018 한국전자파학회논문지 Vol.29 No.2
모노펄스 센서는 수신된 단일 펄스마다 목표물의 각도를 추정한다. 이러한 모노펄스 센서의 각도 추정을 기만하기 위한 방법으로는 크로스 아이 기법이 효과적인 것으로 알려져 있다. 본 논문에서는 크로스 아이 기법의 각도기만 성능을 확인하기 위해 무반향 챔버에 모노펄스 수신 안테나와 크로스 아이 송신기를 이용해 각도기만 시험 환경을 구성한 결과를 소개한다. 그리고 시험 구성을 이용하여 두 개의 크로스 아이 송신기 간격을 변화시키면서 모노펄스 수신 안테나에 인가되는 합 신호와 차 신호의 크기를 측정하고, 그에 해당하는 각도기만 성능을 분석한다. A monopulse sensor is used to estimate the angle of a target with respect to each received single pulse. It is well known that the cross-eye technique can result in an angle deception effect against monopulse sensors. To verify this effect, we propose a test environment configuration for the angle deception using monopulse receiving antennae and cross-eye transmitters in an anechoic chamber. Using the proposed test environment configuration, we have measured powers of the sum and difference of the signals received by the monopulse receiving antennae when the distance of the two cross-eye transmitters is varied. Finally, the angle deception performance related to the powers of the sum and difference signals was analyzed.
수동 소자 제작을 위한 양극 산화 알루미늄 설계 및 공정
장연수(Yeonsu Jang),김현철(Hyeon Cheol Kim),전국진(Kukjin Chun) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
In this paper, using aluminum anodizing technique aluminum sheet is selectively anodized to design and fabricate passive device on aluminum sheet. The proposed process is simpler than conventional via etching and filling process. Aluminum layer protected by photoresist is kept from anodizing, which acts as conductive layer. Unprotected aluminum layer is anodized and it acts as an isolated layer. After anodizing, porous anodized aluminum structure is filled with BCB(Benzo Cyclo Butene). The measurements show that resistance of 8㎟ via is 5.6Ω and dielectric constant of anodized aluminum is 2.03.