http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RF집적회로용 이중층 나선형 대칭구조 인덕터의 설계 및 비교 분석
임국주,신소봉,이상국,Ihm, Guk-Ju,Shin, So-Bong,Lee, Sang-Gug 대한전자공학회 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.10
면적 효율이 높은 대칭 구조를 갖는 이중층 나선형 인덕터를 제시하였으며 그 특성을 일반적인 단일층 나선형 인덕터와 비교하여 분석하였다. 일반적인 예측과 달리 이중층 인덕터의 상하층 유도 계수가 인덕터의 권선수와 함께 증가하는 것을 확인하였고 이로 인하여 동일한 면적에 대하여 이중층 인덕터은 권선수에 따라 단일층에 비해 2.5-4배 정도 높은 인덕턴스값을 나타내었다. 또한 같은 인덕턴스 값에 대하여 이중층 구조로 단일층 구조 보다 높은 충실도를 가짐을 확인하였다. 본 논문에서는 이중층 나선형 인덕터가 단일층 나선형 인덕터보다 면적 효율과 충실도 측면에서 우수하여 RF집적회로에 활용되기에 적절한 보다 구조임을 제시하고자 한다. 제시된 이중층 나선형 인덕터는 완벽한 대칭 구조를 갖도록 설계되었으며 측정 결과에서 이와 같은 특성을 확인할 수 있었으며, 고주파용 초크로서 활용가능성을 확인하였다. An area efficient and symmetric dual-level spiral inductor structure is proposed and evaluated in comparison with the conventional single-level spiral inductors. Contrary to the dual-level inductor mutual coupling coefficient of the upper-and lower-level inductors of the dual-level inductor increases with the increases in the number of turns. Because of this, for the same silicon area, the inductances of the dual-level incuctors are 2.5-4 times higher than that of the single-level inductor. Furthermore, the dual-level showed better quality factor that the single-level inductors for the same inductance. It is the intention of this paper to demonstrate that the dual-level can be more useful for the RF integrated circuits than the conventional single-level spiral inductors form the aspects of area efficiency and quality factor. The proposed dual-level inductors are designed and confirmed to be perfectly symmetric, and can also be used as a high-frequency choke.
원자력 발전소 무정전 전원공급기용 알루미늄 전해 커패시터의 열화 분석 및 보증
임국주(Gook-Ju Ihm),구철수(Cheol-Soo Goo),이동희(Dong-Hee Lee) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.4
원자력 발전소 안전관련 주요 부하에 전원을 공급하는 무정전 전원공급기에 사용되는 알루미늄 전해 커패시터의 열화요인을 검토하였다. 리플전류를 중첩 인가하여 노화시킨 시료는 직류전압만을 인가한 시료에 비해 열화의 정도가 심함을 검중하였다. 적합성 검사 이력이 없는 제품에 대한 로트 보중 샘플링 검사 방법을 검토하였다.
원전 제어 설비용 알루미늄 전해 커패시터의 일반규격품 품질검증 방안 연구
김형관(Hyoung-Gwan Kim),임국주(Gook-Ju Ihm),지영화(Yeong-Hwa Ji) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
일반규격품 품질검증(Commercial Grade Item Dedication)은 원자력발전소의 주요 계통에 사용되는 안전성 관련 기기나 부품을 일반규격품으로 대체하는 경우, 의도된 안전기능의 수행에 대한 합리적 보증을 취하는 과정이다. 본 논문에서는 원자력발전소 주요계통의 제어설비에 사용되는 일반 규격품 알루미늄 전해커패시터에 대한 품질검증 방법을 소개하고, 설계된 안전기능을 적절히 수행할 수 있음을 보증하기 위한 검증필수특성의 정의와 시험 및 검사에 대한 방법론을 기술한다. 원자력발전소에서 시행된 알루미늄 전해커패시터에 대한 일반규격품 품질검증의 과정과 결과를 제시하고, 특수시험 및 검사를 통해 확인된 부적합 사항을 토대로, 기존의 특수시험 및 검사방법에 대한 개선방향을 제안한다.
발전소 및 화학플랜트용 고압 글로브밸브의 신뢰성 향상에 관한 연구
김지은(Jieun Kim),김정석(Jungseok Kim),임국주(Gukjoo Im),김종찬(Jongchan Kim),이진영(Jinyoung Lee),최준영(Junyoung Choi) 대한설비공학회 2017 대한설비공학회 학술발표대회논문집 Vol.2017 No.6
Reliability standards for high-pressure globe valves for domestic power and chemical plants are currently not actualized. Therefore, it is necessary to secure the reliability of high-pressure valves for domestic plants in order to keep requirement with the international market. However, there are some problems to ensure reliability. First, the cause of the failure should be identified when using the existing valve. It is difficult to identify the cause of the failure because the database has not been established in the domestic market. Second, the reason for the lack of reliability evaluation devices and methods for each product has not been established. Therefore, this study has focused to solve these problems. The failure database in the field was analyzed to identify the failure status and cause. FMEA was conducted based on the analyzed data. It was found that the main cause of the failure was pressure and repeated operation. Accelerated life test method was developed based on actual conditions to ensure reliability of these causes. The Inverse power model for the various accelerated life test models was applied. In order to ensure 500,000 cycles of repeated operation at 180 bar pressure condi tions as actual conditions accelerated life test was conducted as repeated 40,000 cycles at 270 bar pressure. We found that there was no leakage and failure. For this purpose, a jig for repeated test was fabricated and a pressure sensor was attached to the front of each valve, and a monitoring system was installed to confirm the data. As a result of the test, it was sure to guarantee reliability by operating without leakage and failure until the end of 40,000 cycles. This study is based on a database of actual field failures and can be used to develop a reliability assurance test method.