번식용 교잡 흑염소의 유지와 성장을 위한 대사에너지 요구량 추정

이진욱,김관우,이성수,고응규,이용재,김성우,전다연,노희종,윤영식,김도형,Lee, Jinwook,Kim, Kwan Woo,Lee, Sung Soo,Ko, Yeoung Gyu,Lee, Yong Jae,Kim, Sung Woo,Jeon, Da Yeon,Roh, Hee Jong,Yun, Yeong Sik,Kim, Do Hyung 한국초지조사료학회 2019 한국초지조사료학회지 Vol.39 No.1

본 연구는 사양실험에 의한 회귀식 추정방법에 의해 교잡종(개량종) 번식용 암컷 흑염소의 육성기와 임신기 유지와 성장을 위한 에너지요구량을 구하기 위해 수행되었다. 번식용 암컷 흑염소 50두를 공시하여 사료의 대사에너지 수준을 육성기(5개월령)에는 각각 2.32(G1), 2.49(G2), 2.74(G3), 2.99(G4) 및 3.24(G5) Mcal/kg로 하여 2016년 5월부터 9월까지 진행하였으며, 임신기(9개월령 이후)에는 각각 2.32(P1), 2.43(P2), 2.55(P3), 2.66(P4) 및 2.78(P5) Mcal/kg로 하여 2017년 1월부터 4월까지 수행하였다. 실험사료는 염소용 TMR 사료를 이용하여 조단백질 수준을 14%로 고정시키고 에너지 첨가제(유락)를 이용하여 에너지 수준을 조절하였다. 건물 섭취량은 처리구 간에 육성기, 임신기 모두 유의성이 없었으며, 체중대비 1.5~2.0% 수준으로 조사되었다. 일당증체량은 육성기에는 46~69g, 임신기에는 150~190g으로 사료의 에너지수준이 증가함에 따라 높게 나타났으며, 사료요구율은 육성기 6.5~9.7의 범위로 에너지수준이 높을수록 사료요구율이 개선되는 경향을 나타내었다. 임신기의 경우 3.5~3.8의 범위로 에너지 수준에 따른 영향은 없는 것으로 나타났다. 대사 체중 당 에너지섭취량과 일당증체량 사이의 회귀분석을 통한 유지에너지 요구량 추정 시 육성기에는 $102.5Kcal/BW^{0.75}$이고, 임신기에는 $105.83Kcal/BW^{0.75}$로 나타났다. 급여 사료의 에너지 수준에 따른 번식성적은 에너지 수준이 높아질수록 분만율이 낮게 나타났으나 산자수와 생시체중의 경우 증가하는 경향을 보였다. 본 연구에서 도출된 결과는 향후 흑염소의 사양표준 설정을 위한 기초자료로 이용될 수 있을 것으로 사료되며, 앞으로 대사실험, 비교도축법 등 다양한 추정방법과 비교를 통해 정확도를 높이는 연구가 필요할 것으로 사료된다. This study was conducted to predict the energy requirements for maintenance and growth of female Korean black goats during their growth and pregnancy phases. Fifty female goats ($18.7{\pm}0.27kg$) in their growth phase with an average age of 5 months were stratified by weight and randomly assigned into 5 groups. They were fed 5 diets varying in metabolic energy (ME) [2.32 (G1), 2.49 (G2), 2.74 (G3), 2.99 (G4), and 3.24 (G5) Mcal/kg] until they were 9-month-old. After natural breeding, 50 female goats ($30.7{\pm}0.59kg$) were stratified by weight and randomly assigned into 5 groups. They were fed 5 diets varying in ME [2.32 (P1), 2.43 (P2), 2.55 (P3), 2.66 (P4), and 2.78 (P5) Mcal/kg]. The average feed intake ranged between 1.5 and 2.0% of the body weight (BW), and there was no significant difference between the treatment groups with goats in growth or pregnancy phases. Average daily gain (ADG) in diet demand during the growth phase increased with an increasing ME density and ranged from 46 to 69 g/d (p<0.01). Feed conversion ratio (FCR) improved with the ME density during the growth phase (p<0.01). The intercept of the regression equation between ME intake and ADG indicated that energy requirement for maintenance of goats during growth and pregnancy phases was $103.53kcal/BW^{0.75}$ and $102.7kcal/BW^{0.75}$, respectively. These results may serve as a basis for the establishment of goat feeding standards in Korea. Further studies are required to assess the nutrient requirement of goats using various methods for improving accuracy.

보충사료 급여수준이 엘크 수사슴의 생산성 및 방목강도에 미치는 영향

이진욱,이상훈,이성수,전다연,김성우,윤영식,김상우,박형수,김관우,Lee, Jinwook,Lee, Sang Hoon,Lee, Sung Soo,Jeon, Dayeon,Kim, Sung Woo,Yun, Yeong Sik,Kim, Sang Woo,Park, Hyung Soo,Kim, Kwan Woo 한국초지조사료학회 2019 한국초지조사료학회지 Vol.39 No.2

본 연구는 엘크 수사슴의 방목 시 보충사료 급여수준에 따른 생산성 변화와 적정 방목강도 구명을 통하여 초지활용성을 향상시키고 사슴 방목에 대한 기초자료를 제공하기 위하여 수행되었다. 공시가축은 평균체중 195kg의 2년생 엘크(Cervus canadensis) 수사슴 15두를 공시하였으며, 보충사료 급여수준에 따라 3개의 처리구(체중의 1.0%(T1), 체중의 1.5%(T2), 체중의 2.0%(T3))에 완전임의배치를 하였다. 실험기간동안 건물섭취량과 일당증체량은 보충사료 급여수준이 높을수록 유의적으로 높게 나타났다. 월별 건물섭취량과 증체량은 봄부터 여름까지 증가하다 가을로 들어서면서 감소하는 일반적인 사슴의 섭식패턴과 유사하게 나타났다. 그러나 뿔 성장기 보충사료 급여수준이 낮을 경우 녹용성장기에 성장지연의 문제가 발생하는 것으로 나타났다. 녹용생산성의 경우 영양수준과의 연관성이 낮은 것으로 나타났다. 방목초지의 사초생산성은 5월에 가장 높았고 8월 이후 급격히 감소하는 것으로 나타났으며, 산야초를 활용한 산지방목에 비해서 조단백질 함량이 높게 나타났다. 엘크 수사슴의 월별 적정 방목강도는 사초생산성이 높은 5~6월에 보충사료 급여수준에 따라 38~59 두/ha로 높게 나타났고, 7월 이후에는 13~32 두/ha로 낮게 나타났다. 또한, 보충사료 급여수준이 증가할수록 사초섭취량이 감소하여 방목강도가 높아지는 것으로 나타났다. 본 연구의 결과로 엘크 수사슴의 방목 시 녹용성장기 성장지연을 예방하고 방목 시 안정적인 증체량을 유지하기 위해서는 보충사료를 체중의 1.5%이상 급여하는 것이 필요하다고 사료되며, 초지의 활용성을 향상시키기 위해서 사초 생산성을 고려하여 적정 방목강도의 조절이 필요한 것으로 판단된다. This study was conducted to investigate the effect of supplementary feeding levels on livestck and forage productivity and grazing intensity in Elk stags (Cervus canadensis). A fifteen 2-year-old Elk stags about 195 kg were randomly assigned to one of three dietary treatments (five animals per treatment). The dietary treatments consisted of a feeding concentrate of 1.0% of body weight (T1), 1.5% of body weight (T2) and 2.0% of body weight. Total dry matter intake (TDMI) was increased with increased with an increasing supplementary feeding levels. Average daily gain (ADG) were significantly increased with an increasing supplementary feeding levels (p<0.05) and reached a maximum on July and was lower in spring than autumn. The velvet antler production was no differences among treatment groups. Forage productivity of pasture and crude protein content were highest on May and decreased thereafter, however, crude fiber content was the reversed. The grazing intensity of Elk stags was increased in spring (38 to 59 head per ha) than summer and autumn (13 to 32 head per ha). The average grazing intensity of Elk stags ranged from 21 to 34 head per ha, which is affected by supplementary feeding levels. This result suggests that feeding supplementary diet at 1.5 % of body weight was needed to maintain the stable wight gain in antler growing periods and control the proper grazing intensity of Elk deer stags.

Y₂O₃가 1 wt% 첨가된 AlN 세라믹의 전기절연성에 미치는 TiO₂ 첨가의 효과

이진욱,이원진,이성민,Lee, Jin-Uk,Lee, Won-Jin,Lee, Sung-Min 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.12

The effects of $TiO_2$ addition on the electrical insulation of AlN ceramics with 1 wt% $Y_2O_3$ as a sintering aid have been investigated. Some of $TiO_2$ has reacted with AlN powders and transformed to fine TiN particles during sintering, which was uniformly dispersed along grain boundaries of AlN. At a high electrical field (500 V/mm), the resistivity of AlN ceramics with $TiO_2$ addition of 0.2 wt% increased about 1000 times from $3{\times}10^{10}{\Omega}cm$ to $3.1{\times}10^{13}{\Omega}cm$. Based on the impedance spectroscopy measurement, it was found that $TiO_2$ addition increased dramatically electrical resistivity of AlN grains much more than that of grain boundaries. Thus, $TiO_2$ was believed to dissolve inside AlN grains to suppress ionic conduction of Al vacancies. This suppressed ionic conduction by Ti incorporation into AlN grains seems to contribute to more electrically insulating AlN ceramics.

Fly Ash를 이용한 고령토벽돌의 소결 특성

이진욱,이성민,김형태,최의석,이용석,Lee, Jin-Uk,Lee, Sung-Min,Kim, Hyung-Tae,Choi, Eui-Seok,Lee, Yong-Seok 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.12

고령토질 벽돌에 대한 fly ash의 첨가가 소결온도에 미치는 영향과 그에 따른 물성의 변화를 관찰하였다. Fly ash로는 탄소 8∼9%의 무연탄 연로 재를 사용하였고 고령토 등의 국산 천연원료를 이용하여 실험을 하였다. Fly ash와 고령토 등의 4종의 원료를 5가지의 혼합비로 조합하여 혼합, 성형하고 각각 1050${\circ}C$, 1100${\circ}C$, 1150${\circ}C$, 1200${\circ}C$의 온도로 소성하였다. 소성온도가 증가함에 따라 모든 시편에서 흡수율은 낮아지고 압축 강도는 증가하였다. 소성온도가 1100${\circ}C$ 이하인 경우 fly ash의 함량이 증가함에 따라 흡수율은 증가하고 강도가 감소하였다. 이에 비하여 소성온도가 1150${\circ}C$ 이상인 경우 흡수율은 소성온도가 낮은 경우와 유사한 경향을 보였으나 강도는 증가하였다. The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using coal as fuel, containing free carbon of 8∼9 wt%. The starting natural materials were mixed with 5 different proportions of fly ash, pressed and then sintered at 1050, 1100, 1150 and 1200${\circ}C$. With sintering temperature, water absorption decreased and compressive strength increased. When specimens were sintered at the temperature lower than 1100${\circ}C$, water absorption increased and strength decreased with fly ash content. In contrast, when sintering was done at the temperature higher than 1150${\circ}C$, water absorption increased with fly ash content similarly but strength was improved.

다양한 조사료를 이용해 제조한 TMR이 흑염소 반추위 in vitro 발효성상에 미치는 영향

이진욱,이성수,김찬란,최봉환,이상훈,김동교,이은도,김관우,류채화,Lee, Jinwook,Lee, Sung-Soo,Kim, Chan-Lan,Choi, Bong-Hwan,Lee, Sang-Hoon,Kim, Dong-Kyo,Lee, Eun-Do,Kim, Kwan-Woo,Ryu, Chae Hwa 한국초지조사료학회 2021 한국초지조사료학회지 Vol.41 No.2

본 연구는 TMR에 사용된 조사료원의 종류가 염소 반추위 발효 특성에 미치는 영향을 조사하였다. 시험에 사용된 조사료원은 볏짚(RS), 이탈리안 라이그라스(IRG), 티모시(TIM) 및 알팔파(ALF)을 이용하여 시험용 TMR을 제조하였다. In vitro 반추위 발효 실험은 24, 48 및 72시간 동안 진행하였고, 각 시간별 발효성상(발효가스, 휘발성지방산, 암모니아태 질소)을 조사하였다. 시험사료의 조단백질 및 비섬유성 탄수화물 함량은 RS, IRG, TIM 그리고 ALF 순으로 높았다. 발효 24시간에서는 valerate와 암모니아태 질소에서 유의적인 차이가 관찰되었고, ALF 시험구가 가장 높았고, RS가 가장 낮았다. 발효 48시간에서는 총 가스 발생량에서 유의적 차이가 관찰되었고(p<0.05), RS 시험구에서 가장 높은 가스발생량이 관찰되었다. 그러나 발효 72시간대에서는 RS 시험구에서 유의적으로 가장 낮은 가스발생량이 관찰되었다. 휘발성 지방산의 유의적인 차이는 발효 72시간에 관찰되었다. ALF 시험구에서 유의적으로 높은 총 휘발성지방산, butyrate 및 valerate 생성량이 관찰되었다(p<0.05). 메탄가스 발생량은 모든 발효시간동안 처리구간 유의적 차이가 관찰되지 않았다(p>0.05). 본 연구결과 염소에서 사료 내 조사료의 종류가 발효성상 변화에 영향을 줄 수 있는 것으로 나타났으며, 이는 염소에서 양질조사료의 활용성을 향상시키기 위한 기초자료로 활용될 수 있을 것으로 사료된다. 그러나 실제 가축에서의 생산성 변화 등의 효과를 확인하기 위하여 in vivo 상에서 추가적인 연구가 필요하다고 생각된다. In this study, the effect of forage sources in the total mixed ration (TMR) on in vitro goat rumen fermentation was investigated. Rice straw (RS), Italian ryegrass (IRG), timothy (TIM), and alfalfa (ALF) were used as forage sources. Each forage source was mixed with a commercial goat concentrate diet in the ratio of 1:1. Total 4 TMR were prepared. Rumen simulated in vitro fermentation using goat rumen fluid collected from the slaughterhouse was conducted until 72^th. For fermentation parameters, gas production (GP), volatile fatty acids (VFAs), and ammonia nitrogen (NH₃-N) were examined. All assays were performed at 24^th, 48^th, and 72^th h of incubation individually. Contents of crude protein and non-fibrous carbohydrate were greater in the order of RS < IRG < TIM < ALF. Significant treatment effects were found in valerate and NH₃-N at 24^th h of incubation (p<0.05). ALF showed the greatest contents of them and RS was the lowest. At 48^th incubation, a significant effect was detected at GP (p<0.05) and RS was greater than others. However, GP of RS was lower than others at 72^th. Significant effects on Total VFA, butyrate, and valerate productions were found at 72^th h of incubation (p<0.05). ALF showed the greatest production. Methane production from all treatments was not significantly different for each incubation time (p>0.05). The present study provided primary information on how goat rumen fermentation responds to different nutrient contents and forage sources of TMR. And the information could be used for the design or optimizing economical diet formulation for goats.

자궁난소질환에 대한 봉독(Bee Venom)을 활용한 국내외 연구 동향 분석

이진욱,강나훈,유은실,박남춘,양혜린,김남훈,박경선,이진무,이창훈,장준복,황덕상,Lee, Jin-Wook,Kang, Na-Hoon,Yoo, Eun-Sil,Park, Nam-Chun,Yang, He-Rynn,Kim, Nam-Hoon,Park, Kyoung-Sun,Lee, Jin-Moo,Lee, Chang-Hoon,Jang, Jun-Bok,Hwang, Deok- 대한한방부인과학회 2017 大韓韓方婦人科學會誌 Vol.30 No.4

Objectives: Bee Venom has been used to relieve pain and to treat various diseases, such as arthritis, cancer and skin disease. Although Bee Venom has used extensively in gynecological fields, we don't have enough evidence with it. This study is to investigate efficacy and safety of Bee Venom on women by investigating papers, then we are going to suggest the direction of research. Methods: We searched for papers which had Bee Venom from Pubmed, OASIS, Journal of Korean Obstetrics & Gynecology, Journal of Korean Medicine up to August 2017, then classified according to the type of studies. Results: Eleven papers have been finally selected. One paper was a case report about atypical squamous cells of undetermined significance. Four papers were in vivo studies about 1 endometriosis and 1 polycystic ovarian syndrome and 2 human cervical cancer. Among eight papers that were in vitro studies, four papers were reported about ovarian cancer and four papers reported about human cervical cancer. Among ten papers that were experimental studies, two papers have been studied both in vivo and in vitro. Most of studies have shown that Bee Venom is useful for gynecological disorders. Conclusions: It has been identified that Bee Venom could be a good treatment for female disorder. However, more clinical reports and well-designed studies will be needed.

커먼레일 직접분사(CRDi)용 고압 디젤인젝터의 구동방식별 Pilot Spray 특성비교 (I) - 실제 직접분사식 디젤엔진에서의 사전분사 특성 분석 -

이진욱,Lee, Jin-Wook 한국액체미립화학회 2010 한국액체미립화학회지 Vol.15 No.1

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for driving the injector.

TOPKAT^®, Derek^®, OECD toolbox를 활용한 화학물질 독성 예측 연구

이진욱,박선영,장석원,이상규,문상아,김현지,김필제,유승도,성창호,Lee, Jin Wuk,Park, Seonyeong,Jang, Seok-Won,Lee, Sanggyu,Moon, Sanga,Kim, Hyunji,Kim, Pilje,Yu, Seung Do,Seong, Chang Ho 한국환경보건학회 2019 한국환경보건학회지 Vol.45 No.5

Objectives: Quantitative structure-activity relationship (QSAR) is one of the effective alternatives to animal testing, but its credibility in terms of toxicity prediction has been questionable. Thus, this work aims to evaluate its predictive capacity and find ways of improving its credibility. Methods: Using $TOPKAT^{(R)}$, OECD toolbox, and $Derek^{(R)}$, all of which have been applied world-wide in the research, industrial, and regulatory fields, an analysis of prediction credibility markers including accuracy (A), sensitivity (S), specificity (SP), false negative (FN), and false positive (FP) was conducted. Results: The multi-application of QSARs elevated the precision credibility relative to individual applications of QSARs. Moreover, we found that the type of chemical structure affects the credibility of markers significantly. Conclusions: The credibility of individual QSAR is insufficient for both the prediction of chemical toxicity and regulation of hazardous chemicals. Thus, to increase the credibility, multi-QSAR application, and compensation of the prediction deviation by chemical structure are required.

방목 및 사사 사육이 엘크 사슴의 사료섭취량, 증체량 및 녹용 생산성에 미치는 영향

이진욱,이성수,연성흠,조창연,김상우,김관우,Lee, Jinwook,Lee, Sung Soo,Yeon, Sung Heum,Cho, Chang Yeon,Kim, Sang Woo,Kim, Kwan Woo 한국초지조사료학회 2017 한국초지조사료학회지 Vol.37 No.4

본 연구는 엘크 사슴의 사육방식에 따른 사료섭취량, 체중 변화 및 녹용생산성에 미치는 영향을 확인하기 위하여 실시하였다. 엘크 사슴 12두를 공시하여 사사사육과 방목사육 형태로 사육하였으며, 처리구 간에 섭취량은 유사하게 나타났다. 일당증체량과 녹용생산성의 경우 방목사육 형태가 높게 나타났는데, 일당증체량은 방목사육 시 약 39% 높은 경향을 보였는데 이는 발육 개선효과가 있을 것으로 생각된다. 녹용 생산성 역시 방목사육 시에 약 19% 높은 경향을 보였다. 그러나 녹용 생산성의 경우 개체 간 편차가 심하여 통계적 유의성은 인정되지 않았다. 본 시험에서 방목사육 시에 일당증체량과 녹용 생산성이 높게 나타난 것은 방목에 따른 조사료원의 영양적 성분이 높기 때문으로 생각된다. 이러한 결과는 사슴 방목의 효과에 대한 기초자료로서 충분이 활용될 수 있을 것이며, 앞으로 계절과 방목지의 초종에 따른 녹용의 생산성과 안정성에 대한 추가적인 연구가 수행되어야 할 것으로 생각된다. This study was conducted to investigate the effect of pasture grazing and barn feeding system on the growth performance, weight gain and velvet antler productivity in Elk. Twelve 5-year-old elk stags about 273 kg were stratified by weight and randomly assigned by feeding system (a pasture grazing and a barn feeding, n=6). The average feed intake were not signigicant difference between two groups. Average daily gain for grazing and barn feeding group was 0.25 g and 0.29 g respectively, showing no significant difference. Velvet antler yield for grazing and barn feeding group was 7,700 g and 6, 960 g respectively, with no significant difference. In conclusion grazing group was better than barn feeding group in feed intake, body weight gain and velvet antler productivity. However, there were no statistical significant difference between the two group. These results may serve as the basis for further study of deer feeding system in Korea and further study needed to examine the grazing intensity and economic efficiency.

상업용 소각로 연소실 성능예측을 위한 수치해석 연구

이진욱,박병수,윤용승,서정대,허일상,Lee, Jin-Wook,Park, Byung-Soo,Yun, Yong-Seung,Seo, Jung-Dae,Huh, Il-Sang 한국연소학회 1999 한국연소학회지 Vol.4 No.1

Numerical analysis for the combustion flow in the combustion chamber of incineration system has been carried out in order to acquire the basic design capability of incineration system. Established mathematical model was applied to the performance prediction of the pre-designed combustion chamber of commercial plant. Especially, combustion characteristics and the variation of flow pattern have been deeply discussed in accordance with secondary air injection. Secondary air injection was effective for the turbulent mixing between air and carbon monoxide/volatile matter resulting in considerably reduced CO content at the exit. Secondary air injection was found to be one of the key design parameters because the size of recirculation zone could be changed with the variation of injection characteristics.