http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로스트립-프로브 급전을 이용한 U형 슬롯 패치 안테나 설계
이승엽 여수대학교 1999 論文集 Vol.14 No.2
A microstrip-probe feed structure for patch antennas with electrically thick air substrate is presented. This new type of feed, microstrip line combined with probe, lies between the patch and the ground. Therefore, this feed has several advantages over a coaxial-probe feed. As confirmed by our experimental measurements, we improved the matching and the front to back ratio(F/B) characteristic over a wide bandwidth. An antenna bandwidth as large as 3 times that of a conventional rectangular microstrip antenna has also been obtained. Details of the proposed design and experimental results are presented.
이승엽,곽진영,최혜빈,김채린 한국농·산업교육학회 2019 농업교육과 인적자원개발 Vol.51 No.4
The study aims to analyze career commitment research trends for local workers to provide basic data for conducting future research and to provide implications for the direction of conducting research. For this purpose, research object, research method, presentation paper, measurement tool, analysis method, and role of the variable were analyzed according to the research period, an analysis results are as follows: First, a total of 215 career commitment studies have been collected, the study first started in the 1990s, and it has been steadily studied since the 2000s. Second, the most frequently research objects were experts and related workers and service workers. Third, all research except one was using quantitative research methods, and only survey research methods were used among quantitative research methods. Fourth, many studies were conducted in the field of social science, and mainly conducted in the field of tourism and management of the social sciences. Fifth, measurement tool used mainly in the study of career commitment in domestic was a measurement tool of Blau(1985). Sixth, the most used of the analysis methods were factor analysis, and next most used were correlation and regression. Seventh, most studies used career commitment as a dependent variable, and the next most used were mediator variables. Based on the results, suggestions for future career commitment research were presented. 이 연구는 국내 근로자를 대상으로 한 경력몰입 연구동향을 분석하여 향후 연구 수행을 위한 기초 자료를 제공하고 연구 수행 방향에 대한 시사점을 제공하는 데 목적이 있다. 이러한 목적에 따라 연구 시기에 따른 연구대상, 연구방법, 발표지, 측정도구, 분석방법, 변인 역할을 분석하였고, 분석 결과는 다음과 같다. 첫째, 수집된 경력몰입 연구물은 총 215편으로 1990년대에 처음 연구가 시작되었고, 2000년대부터 급증하여 현재까지 꾸준히 연구가 수행되었다. 둘째, 가장 많이 연구가 수행된 대상은 전문가 및 관련 종사자와 서비스 종사자였다. 셋째, 1편을 제외한 모든 연구가 양적연구방법을 활용하고 있었고, 양적연구방법 중에서도 조사연구방법만이 활용되었다. 넷째, 학술지 분야 중 사회과학 분야에서 많은 연구가 수행되었고, 사회과학의 세부분야 중 관광학과 경영학 분야에서 주로 연구가 수행되었다. 다섯째, 국내 경력몰입 연구에서 주로 사용한 측정도구는 Blau(1985)의 측정도구였다. 여섯째, 분석방법 중 가장 많이 활용된 것은 요인분석이었으며, 다음으로 많이 활용된 것은 상관분석과 회귀분석이었다. 일곱째, 경력몰입을 종속변인으로 활용한 연구가 가장 많았고, 매개변인으로 활용한 연구가 그다음으로 많이 수행되었다. 이와 같은 결과를 바탕으로 향후 경력몰입 연구에 대한 제언을 제시하였다.
Mapping of Quantitative Trait Loci Associatedwith Viviparous Germination in Rice
이승엽,Moo Young Eun,Jeong Ho Ahn,Young Soon Cha,Doh Won Yun,Myung Cheol Lee 한국작물학회 2006 Korean journal of crop science Vol.51 No.7
The viviparous germination (VG) with lodging caused the yield reduction and quality deterioration in rice. We carried out the evaluation of VG tolerance (on the 40th day after heading) and mapping QTLs associated with VG tolerance using the recombinant inbred lines (M/G RILs) from a cross between Milyang 23 (japonica/indica) and Gihobyeo (japonica). The VG rates of Milyang 23 and Gihobyeo were 0.0 and 7.0%, respectively. The averaged VG rate of 162 M/G RILs was 7.7%, and their range was from 0.0 to 50.9%. Of the 162 RILs, 144 lines were tolerant less than 10%, and 18 lines were susceptible more than 10%. Using the M/G RIL Map, three QTLs associated with the viviparous trait were detected on chromosome 2 (qVG 2-1 and qVG 2-2) and 8 (qVG 8). qVG 2-1 was linked to RM 32D and RZ 166, and had LOD score of 2.97. qVG 2-2 was tightly linked to E13M59.119-P1 and E13M59.M003-P2, and showed higher LOD score of 3.41. qVG 8 was linked to RM33 and TCT116, and had LOD score of 2.67. The total phenotypic variance explained by the three QTLs was about 24.4% of the total variance in the population. The detection of new QTLs associated with VG tolerance will provide important informations for the seed dormancy, low temperature germination, or comparative genetics.
이승엽,이세현,최영지,김유신,김명균,전영미,김정기 대한치과재료학회 2010 대한치과재료학회지 Vol.37 No.3
본 연구는 건조 상태에서 second-order angulation을 변화시켰을 때 수종의 자가결찰브라켓과 일반적인 금속 트윈 브라켓 (Tomy, Ohkuma, Japan)의 건조 상태에서 마찰저항을 비교하였다. 일반적인 금속 브라켓의 마찰저항력은 200 mg의 결찰력하에서 측정되었고, .022 inch 브라켓과 .019×025 inch 각형 스테인레스스틸 호선이 사용되었다. 브라켓간 거리는소구치 발치와와 비슷한 조건을 주기 위해서 18 mm 간격을 두었으며, 각각의 archwire-bracket couple의 마찰력은 0˚에서 4˚범위의 second order angle에서 측정되었다. 실험결과 다음과 같은 결론을 얻었다. 자가결찰브라켓은 모든 각도의 범위에서 일반 금속 브라켓 보다 낮은 마찰력을 보였다. 0°와 1°에서는 일반 금속 브라켓의 마찰력이 가장 높고, 수동 자가결찰브라켓 (Damon SL II)의 마찰력이 가장 낮았다. 전체적으로 0°와 1°사이에서는 낮은 마찰력을 보였으나, 1°를 초과하는 범위에서는 마찰력이 급격히 증가하였다. 3°이상에서는 자가결찰브라켓의 종류에 따른 마찰력 차이가 통계학적으로 유의하기 않았다. 결론적으로 본 실험결과 수직적 차이가 심한 high canine과 같은 총생치아를 교정할 때 자가결찰브라켓이 일반적인 금속브라켓보다 유리하며, 심미적인 폴리카보네이트 소재의 자가결찰브라켓도 마찰력의 손실없이 효과적인 치료의 도구가 될 수 있음을 확인하였다.
이승엽,박병옥 한국결정성장학회 2008 韓國結晶成長學會誌 Vol.18 No.2
Zinc oxide (ZnO) thin films were prepared by a sol-gel method. The structural and electrical properties were investigated by varying drying and annealing temperatures. The thin films were coated (250 nm) by spin-coating method on glass substrates. The optimum drying temperature of ZnO thin films was 300℃ where the resistivity was the lowest and the preferred c-axis orientation was the highest. The annealing was carried out in air and inert atmospheric conditions. The degree of the preferred c-axis orientation was estimated. The highest preferred c-axis orientation was recorded at 600℃. The preferred c-axis orientation and grain growth resulted in the mobility enhancement of the ZnO thin films, and the lowest resistivity was 0.62 Ω·cm at 600℃.