http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연소 후 배가스를 이용하여 다단막을 통해 CO2의 High Purity와 High Recovery를 달성하는 공정연구
이다훈,이정현,여정구 한국막학회 2016 한국막학회 총회 및 학술발표회 Vol.2016 No.05
연소 후 생성되는 연소가스 중 CO2는 온실가스 기체중 하나로, CO2를 처리하기 하기 위해 CCS 기술 개발이 세계적으로 주목 받고 있다. 하지만 단일막을 이용한 CO2 포집 공정에서는 약 14%의 CO2를 포함한 연소 배기가스로부터 고 순도, 고회수율을 달성하기란 매우 어렵다. 본 연구에서는 다단막 공정 디자인 및 다양한 운전 변수를 통하여 14%의 CO2를 가지고 있는 혼합모사가스로부터 순도 73% 회수율 74%의 포집 효율을 얻을 수 있었다.
다양한 기계적 하중조건에서 초기 형상이 솔더볼의 비탄성 변형에 미치는 영향에 관한 수치적 연구
이다훈,임재혁,이은호 한국마이크로전자및패키징학회 2023 마이크로전자 및 패키징학회지 Vol.30 No.4
BGA(ball grid array)는 높은 집적도와 우수한 방열 성능을 갖고 있어 널리 이용되는 방식의 패키지이다. BGA 에서 솔더볼은 패키지와 PCB를 전기적으로 연결하는 중요한 역할을 하므로, 다양한 기계적 하중 하에서 솔더볼의 비탄성 변형을 이해하는 것은 반도체 패키지의 강건설계에 필수적이다. 본 연구에서는 공정 중 PCB의 휨, die와 substrate 간의 열팽창 계수 차이 등으로 인해 소성변형이 발생한 솔더볼의 초기 형상이 비탄성 변형과 파단에 미치는 영향을 유한요소 해석으로 분석하였다. 시뮬레이션 결과, shear와 bending 하중에서 tilted, hourglass 형상 모두 파단이 발생한 반면, compression 하중이 작용하는 경우는 모두 파단이 발생하지 않았다. Shear와 bending 하중에 compression이 각각 결합될경우, 응력삼축비가 0보다 작은 값으로 유지되어 파단이 억제되었다. 또한 변형에 취약한 요소의 Lagrangian-Green 변형률 텐서를 이용해 비교한 결과, 동일한 하중 조건이라도 솔더볼의 형상에 따라 변형의 양상에 유의미한 차이가 있음을 확인하였다. Ball Grid Array (BGA) is a widely used package type due to its high pin density and good heat dissipation. In BGA, solder balls play an important role in electrically connecting the package to the PCB. Therefore, understanding the inelastic deformation of solder balls under various mechanical loads is essential for the robust design of semiconductor packages. In this study, the geometrical effect on the inelastic deformation and fracture of solder balls were analyzed by finite element analysis. The results showed that fracture occurred in both tilted and hourglass shapes under shear loading, and no fracture occurred in all cases under compressive loading. However, when bending was applied, only the tilted shape failed. When shear and bending loads were combined with compression, the stress triaxiality was maintained at a value less than zero and failure was suppressed. Furthermore, a comparison using the Lagrangian-Green strain tensor of the critical element showed that even under the same loading conditions, there was a significant difference in deformation depending on the shape of the solder ball.
모바일 RFID의 특성이 실제 사용의도에 미치는 영향에 관한 연구
이다훈(Da Hoon Lee),조성민(Sung Min Cho),황재훈(Jaehoon Whang) 한국데이타베이스학회 2013 Journal of information technology applications & m Vol.20 No.1
The emergence of RFID markets and development of various RFID-embedded mobile devices has brought fundamental changes to our lives. As the availability of RFID readers and tags that are implanted in smart phones and table PCs increases, information on RFID-affixed objects can be tracked wirelessly and this had open possibilities for B2B businesses to be run like B2C businesses. However, given the popularity of the RFID markets, there is limited research in this area. This paper serves to develop an extended technology acceptance model by Mobile RFID characteristics (perceived cost, security, instant connectivity, context awareness, and result demonstrability) examines the determinant factors that cause the acceptance of mobile RFID. To do so, the study conducted a survey targeting smart phone users and used the PLS path modeling, one of the structural equation models to verify the significance of research hypothesis. As a result, perceived cost, instant connectivity, context awareness, and result demonstrability turned out to have a real effect on intention to use mobile RFID by means of perceived usefulness and perceived ease of use. Security turned out to have a partial effect on intention to use mobile RFID by means of perceived usefulness or perceived ease of Use.
Semantic Segmentation을 이용한 구름 분석 기술 기반, 일사량 및 태양광 발전량 예측 기술
이다훈(Da-Hun Lee),고디모데(Di-Mo-De Go),김현우(Hyun-Woo Kim) 대한전자공학회 2020 대한전자공학회 학술대회 Vol.2020 No.11
As interest in solar power generation increases, solar power generation facilities and power generation are also increasing. Estimating the amount of power generated in energy generation is essential. However, in the case of solar power generation, it is difficult to predict the amount of radiation or power generation because it is greatly affected by the atmospheric environment. In this paper, to solve this problem, SKY images are acquired through an IP camera equipped with fisheye lens. After that, the image is analyzed using the segmentation method to obtain cloud information. We propose a system that predicts the amount of radiation and generation by using the obtained information as an input value of the LSTM algorithm. In particular, it was confirmed that when cloud information was obtained by the segmentation method, the accuracy was higher than that of the previously used methods. From the data obtained after that, it was confirmed that the error rate was within 10% in predicting the amount of radiation and power generation through LSTM.