http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄소섬유강화 폴리카보네이트 복합재료의 제조 및 특성 분석
원종성,배일준,정진욱,조원기,조호현,이승구 한국섬유공학회 2017 한국섬유공학회지 Vol.54 No.6
In order to develop the high impact resistant composites with high mechanical properties, carbon fiber composites of polycarbonate matrix having high toughness were studied. Carbon fiber reinforced polycarbonate (carbon/polycarbonate) composites were manufactured by a hot press molding under different temperature (270−285oC) and pressure (1.5−5 ton/in2) conditions. The mechanical properties of flexural, interlaminar shear strength, impact energy and morphological features of the carbon/polycarbonate composites were investigated with the molding conditions. The carbon/polycarbonate composites manufactured at 280oC and 3.5 ton/in2 for 3 min. was found to have maximum flexural strength of 820 MPa and interlaminar shear strength of 55 MPa due to the effects of high matrix impregnation and good fiber alignment. On the other hand, the maximum impact resistance of the composite appeared at low flexural strength and interlaminar shear strength.
폴리페닐렌 설파이드를 도입한 에폭시 수지의 제조 및 특성 분석
원종성,박종현,정진욱,이승구,Won, Jong Sung,Park, Jong Hyun,Jeong, Jin Wook,Lee, Seung Goo 한국섬유공학회 2018 한국섬유공학회지 Vol.55 No.2
In recent decades, there has been an increasing interest in the use of thermosetting-resin composites in military aircraft and other aerospace applications because they present higher strength and stiffness properties than their metallic counterparts. However, thermosetting-resin composite materials have a low resistance to impact compared to metals. Therefore, high-toughness thermoplastics have been used as tougheners in thermosetting resins because they do not compromise any of the desirable properties of thermosetting-resin systems. In this study, the improvement in the impact damage tolerance of epoxy-resin composites was investigated by introducing polyphenylene sulfide (PPS), an engineering thermoplastic, into the epoxy resin system at loadings of 0, 10, 20, and 30 phr. Consequently, the impact strength and heat resistance of the epoxy-resin composite mostly increased with the addition of PPS.
커플링제 처리가 폴리케톤 섬유와 실리콘 고무의 계면접착에 미치는 영향
원종성,진다영,이지은,이승구,Won, Jong Sung,Jin, Da Young,Lee, Ji Eun,Lee, Seung Goo 한국섬유공학회 2015 한국섬유공학회지 Vol.52 No.1
Polyketone fiber, a newly developed super fiber, has a tenacity and modulus similar to the p-aramid fiber, and can be used for reinforcing mechanical rubber goods (MRG), such as tires, hoses, and protective gloves. However, the typical interfacial interaction between the polyketone fiber and the polymer matrix is relatively weak, such that the inclusion of polyketone fibers could create defects in the composites, which can easily result in failure. Therefore, it is necessary to modify fiber surfaces to improve wettability for optimization of the fiber-matrix interfacial bonding. In this study, the interfacial adhesion between polyketone fibers and a silicone rubber matrix was enhanced by surface treatments using coupling agents to modify the surface morphological and chemical properties of the polyketone fibers. The effects of coupling agent treatments on the surface of the fiber and interfacial adhesion of the Polyketone/Silicone rubber composites were characterized using dynamic contact angle analysis and X-ray photoelectron spectroscopy (XPS). Morphological changes were observed, by varying the coupling agent content, using a scanning electron microscope (SEM).
마이크로폰 어레이를 이용한 도착 시간 차 기반 소총화기 탄착점 추정 시스템
원종성,박규식,Won, Jongseong,Park, Kyusik 한국음향학회 2018 韓國音響學會誌 Vol.37 No.4
본 논문은 마이크로폰 음향 센서를 이용한 소총화기 탄착점 추정 알고리즘을 제안하였다. 제안된 알고리즘은 기존 신호 도착시간(Time of Arrival, ToA) 방식을 신호 도착 시간 차(Time Difference of Arrival, TDoA) 방식으로 확장 발전시켜 시간 동기화 문제를 해결하였고, 실제 사격 실험을 통해 알고리즘의 성능을 검증하였다. 실제 탄착점과 알고리즘으로 연산된 탄착점의 비교 분석을 통해 제안 시스템이 허용 오차 범위 내에서 정확히 탄착점을 추정하고 있어 우수한 성능을 보이고 있음을 확인하였다. This paper proposes an impact point estimation algorithm of the rifle using microphone sensors. The proposed algorithm resolves the time synchronization problem by expanding the existing ToA (Time of Arrival) method to TDoA (Time Difference of Arrival) method and verifies the performance of the algorithm through the actual shooting experiments. By comparing analysis of the actual and the estimated impact points by the algorithm, it is confirmed that the proposed algorithm has excellent performance by estimating the impact point accurately within the tolerance range.
원종성,이강 한국건설관리학회 2008 한국건설관리학회 논문집 Vol.9 No.4
2003년 이전 국내 건설 국제경쟁력 비교연구에서 우리나라 건설 생산성이 미국, 영국, 일본 등의 선진국에 비하여 낮은 것으로 보고되었다. 그러나 2003년 이후 우리나라 해외 건설수주 물량도 매년 크게 늘고 있으며, Petronas Tower, Burj Dubai와 같은 세계 최고층 건물을 수주, 건설하는 등 양적·질적으로 괄목할 만한 발전을 이루고 있다. 이 시점에서 우리나라 건설생산성의 현주소를 재평가할 필요성이 있다. 본 연구에서는 우리나라와 해외선진국과의 건설생산성을 비교하여 우리나라 건설산업의 국제경쟁력을 평가하고자 한다. 국내 통계자료와 외국 통계자료를 바탕으로 노동자 1인 기준 단위시간동안 생산하는 총공사액을 분석하여 각 국의 건설노동생산성을 측정하고 한국과 일본의 완공된 건축물을 대상으로 층당 소요되는 공사일수와 건축물의 지하층비율을 분석하여 시공경쟁력을 평가하였다. 분석결과, 우리나라의 건설생산성이 아직 건설 선진국인 미국이나 일본보다는 뒤쳐져 있으나 영국보다는 앞서는 것으로 분석 되었다.