http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전자전지원을 위한 새로운 레이더 신호 수신 블랭킹 기법
송규하(Kyu-Ha SONG),이동원(Dong-Weon LEE),한진우(Jin-Woo HAN),류시찬(Si-Chan LYU) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.7
The blanking interface between an ES system and a radar system on the same platform cause the unwanted radar signal separation in the process of the signal measurement of the ES system. In this paper, we propose the novel radar signal blanking method for ES. The proposed method extracts a standard of judgement which we can decide whether a radar signal is separated by the blanking interface and presents how to merge the separated signals. Test result is presented to show the performance of the proposed method.
상태천이확률을 이용한 신경망 기반 PRI 변조형태 인식방법
한진우(Jin-Woo Han),송규하(Kyu-Ha Song),박병구(Byung-Koo Park),조제일(Je-Il Jo),김산해(San-He Kim) 대한전자공학회 2011 대한전자공학회 학술대회 Vol.2011 No.12
The intervals between the TOA of a received pulsetrain from a radar have a specific pattern, because the radar should receive its own signals returned from a target to measure the distance between the radar and the target. In this paper, we propose a novel method of recognizing PRI modulation type based on neural network using state transition probability. The method is shown via computer simulation to be greatly reliable and robust even in the presence of missing and spurious pulses.
한진우(Han Jin Woo),송규하(Song Kyu Ha),이동원(Lee Dong Woen) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.10
Electronic warfare Support(ES) system measures pulse characteristics for received RF signals that received from all directions. ES system discriminates the pulse trains that have a rule, correlationship, continuance from collected data and analyze the characteristics of the data, and identify the emitters by comparison with emitter identification data (EID). Because pulse density is very high and various signal source exists at modem signal environments, high-speed and accurate signal analysis is needed for realtime countermeasure to emitters. Grouping alleviates the load of signal analysis process and supports reliable analysis. In this paper, we suggest an adaptive clustering scheme regarding signal patterns.
남효현(Hyohyun Nam),박준식(Junsik Park),송규하(Kyu-Ha Song),박정동(Jung-Dong Park) 대한전자공학회 2018 전자공학회논문지 Vol.55 No.4
본 논문은 압축센싱을 위한 광대역 수신기를 0.13μm SiGe 프로세스를 사용하여 집적화 구현한 것이다. 제안 된 수신기는 광대역 능동 발룬으로 구성된 2-18 GHz 대역 구동 증폭기, 이중 평형 수동 믹서, 그리고 출력 구동 버퍼를 포함하는 700 MHz 4 단 가변 이득 증폭기 (VGA)로 구성된다. 광대역 버퍼는 -10dB 미만의 반사 손실로 20GHz 이상의 대역폭을 달성하기 위해 RF 입력단에서 의사 전송선로를 이용하였다. IF VGA는 15.49 dB에서 34.74 dB의 가변 이득을 조정할 수 있다. 구현 된 수신기는 통합된 64 비트 SPI 스캔 체인 회로에 의해 제어된다. 서브-나이퀴스트 샘플링 기능은 LO 신호용 외부 PRBS 생성기를 통해 검증되었다. 제작된 수신기의 크기는 0.5 × 0.77㎟이고, 2.5V 전원에서 약 27mA의 DC 전류를 소비한다. In this paper, an integrated broadband receiver capable of the compressed sensing is implemented using 0.13μm SiGe process. The proposed receiver consists of a 2-18 GHz driving amplifier configured as the broadband active balun, a double-balanced passive mixer, and a 700-MHz four stage variable gain amplifier (VGA) including an output driving buffer. The broadband buffer utilizes the pseudo transmission-line at the RF input to achieve the more than 20 GHz of the bandwidth with the return loss less than -10 dB. The IF VGA is capable of varying the gain from 15.5 dB to 34.7 dB. The implemented receiver is controlled by an integrated 64-bit SPI scan-chain block. The sub-Nyquist sampling operation has been verified with an external PRBS generator as the LO signal. The receiver chip size is 0.5 × 0.77㎟, and consumes around 27 mA of DC current under 2.5V supply voltage.
TDOA/FDOA 복합 위치추정 시스템에서 FDOA 측정 정확도에 따른 추정 성능 기여도 분석
김동규(Dong-Gyu Kim),김용희(Yong-Hee Kim),한진우(Jin-Woo Han),송규하(Kyu-Ha Song),김형남(Hyoung-Nam Kim) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.5
현대 전자전 지원 시스템에서는 TDOA (time difference of arrival)나 FDOA (frequency difference of arrival)와 같은 비도래각 정보를 이용하여 미상 신호원의 위치를 추정하는 정밀 위치추정 기법의 필요성이 높아지고 있다. 기존의 단일 TDOA 기반 기법에 관한 연구는 위치추정 알고리즘뿐만 아니라 측정 정확도 향상에 대해 다양한 진척이 이루어졌으며, 최근에는 TDOA와 FDOA 정보를 동시에 사용하여 적은 수신단 수로 보다 많은 정보를 획득할 수 있고 신호원의 속도 추정이 가능한 복합 위치추정 시스템에 관한 연구가 수행되고 있다. 이러한 과정에서 TDOA/FDOA 복합 위치추정 시스템이 기존 단일 TDOA 시스템을 대체할 수 있는 추정 성능을 갖기 위해 요구되는 FDOA 측정 정확도와 성능분석 과정이 필요하다. 본 논문에서는 CRLB (Cramer-Lao lower bound)의 분석을 통해 TDOA/FDOA 위치추정 시스템이 단일 TDOA 위치추정 시스템에 비해 향상된 추정 정확도를 갖기 위해 요구되는 FDOA 측정 정확도의 기준과 이에 따른 기여도를 분석하고, Gauss-Newton 알고리즘을 이용하여 분석 결과를 검증한다. In modern electronic warfare systems, the necessity of a more accurate estimation method based on non-AOA (arrival of angle) measurement, such as TDOA and FDOA, have been increased. The previous researches using single TDOA have been carried out in terms of not only the development of emitter location algorithms but also the enhancement of measurement accuracy. Recently, however, the combined TDOA/FDOA method is of considerable interest because it is able to estimate the velocity vector of a moving emitter and acquire a pair of TDOA and FDOA measurements from a single sensor pair. In this circumstance, it is needed to derive the required FDOA measurement accuracy in order that the TDOA/FDOA combined localization system outperforms the previous single TDOA localization systems. Therefore, we analyze the contribution of FDOA measurement accuracy to emitter location, then propose the criterion based on CRLB (Cramer-Rao lower bound). Simulations are included to examine the validity of the proposed criterion by using the Gauss-Newton algorithm.
TDOA/FDOA 정보를 이용한 Gauss-Newton 기법 기반의 이동 신호원 위치 및 속도 추정 방법과 성능 분석
김용희(Yong-Hee Kim),김동규(Dong-Gyu Kim),한진우(Jin-Woo Han),송규하(Kyu-Ha Song),김형남(Hyoung-Nam Kim) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.6
TDOA (time difference of arrival)와 FDOA (frequency difference of arrival)를 동시에 사용하는 신호원 위치추정 방법은 단일 정보를 이용하는 경우에 비해 높은 정확도를 가지며 이동 신호원의 속도 추정이 가능하다는 장점을 가지고 있다. 최근 종속 미지변수를 정의한 후 비반복적으로 해를 구하는 방법들이 제안되고 있으나 전자전 환경과 같이 수신단과 신호원 간의 거리가 상대적으로 먼 경우에는 추정 정확도가 낮고 모든 수신단 쌍이 동일한 기준 수신단을 공유하여야 한다는 운용상의 제약이 존재한다. 따라서 본 논문에서는 비선형 LS 최적해를 반복계산을 통해 얻어내는 Gauss-Newton 기법을 적용하여 이동신호원의 위치좌표와 속도벡터를 추정한다. 또한 이동 신호원의 위치와 속도 추정 결과를 효과적이고 정량적으로 분석하기 위해 CRLB (Cramer-Rao lower bound) 행렬을 각각의 부공간으로 분해하여 2차원 공간상에 독립된 CEP (circular error probable) 평면으로 도시한다. 모의실험을 통해 주어진 수신단 배치와 조합에서 이동 신호원의 위치 및 속도 추정 성능을 확인하고 분석 결과를 제시한다. The passive emitter location method using TDOA and FDOA measurements has higher accuracy comparing to the single TDOA or FDOA based method. Moreover, it is able to estimate the velocity vector of a moving platform. Recently, several non-iterative methods were suggested using the nuisance parameter but the common reference sensor is needed for each pair of sensors. They show also relatively low performance in the case of a long range between the sensor groups and the emitter. To solve this, we derive the estimation method of the position and velocity of a moving platform based on the Gauss-Newton method. In addition, to analyze the estimation performance of the position and velocity, respectively, we decompose the CRLB matrix into each subspace. Simulation results show the estimation performance of the derived method and the CEP planes according to the given geometry of the sensors.