새로운 상호연결망 하프 버블정렬 그래프 설계 및 성질 분석

서정현,심현,이형옥,Seo, Jung-Hyun,Sim, Hyun,Lee, Hyeong Ok 한국정보통신학회 2017 한국정보통신학회논문지 Vol.21 No.7

버블정렬 그래프는 노드 대칭이며 데이터 정렬 알고리즘에 활용 할 수 있다. 본 연구에서는 버블정렬 그래프의 망 비용을 개선한 하프 버블정렬 그래프를 제안하고 분석한다. 하프 버블정렬 그래프 $HB_n$의 노드수는 n!이고 분지수는 ${\lfloor}n/2{\rfloor}+1$이다. 하프 버블정렬 그래프의 분지수는 버블정렬 그래프의 분지수의 $${\sim_=}0.5$$배 이고, 지름은 $${\sim_=}0.9$$배 이다. 버블정렬 그래프의 망 비용은 $${\sim_=}0.5n^3$$이고, 하프 버블정렬 그래프의 망 비용은 $${\sim_=}0.2n^3$$이다. 하프 버블정렬 그래프는 버블정렬 그래프의 서브 그래프임을 증명하였다. 추가로 라우팅 알고리즘을 제안하였고 지름을 분석하였다. 마지막으로 버블정렬 그래프와 망 비용을 비교 하였다. The Bubble sort graph is node symmetric, and can be used in the data sorting algorithm. In this research we propose and analyze that Half Bubble sort graph that improved the network cost of Bubble sort graph. The Half Bubble sort graph's number of node is n!, and its degree is ${\lfloor}n/2{\rfloor}+1$. The Half Bubble sort graph's degree is $${\sim_=}0.5$$ times of the Bubble sort, and diameter is $${\sim_=}0.9$$ times of the Bubble sort. The network cost of the Bubble sort graph is $${\sim_=}0.5n^3$$, and the network cost of the half Bubble sort graph is $${\sim_=}0.2n^3$$. We have proved that half bubble sort graph is a sub graph of the bubble sort graph. In addition, we proposed a routing algorithm and analyzed the diameter. Finally, network cost is compared with the bubble sort graph.

지난 30년, 학계를 뒤흔든 새 이론과 실험들-화학분야

서정현,Seo, Jeong-Hyeon 한국과학기술단체총연합회 2006 과학과 기술 Vol.39 No.12

W-ZF 기법을 이용한 MIMO-FTN 송수신 구조 연구

서정현,정지원,Seo, Jung-hyun,Jung, Ji-won 한국정보통신학회 2017 한국정보통신학회논문지 Vol.21 No.7

In this paper, we propose a decoding method that improves the transmission rate and reliability by integrating MIMO(Multiple Input Multiple Output) communication scheme using turbo code and FTN(Faster Than Nyquist) scheme among high rate and high reliability wireless communication schemes in wireless communication. The existing MIMO-FTN(Multiple Input Multiple Output-Faster Than Nyquist) scheme based on hierarchical space-time coded method induced data rate loss due to the application of the space-time trellis coding scheme to remove adjacent symbol interference due to FTN scheme. To solve these problems, this paper proposes a method using W-ZF(Weighted-Zero Forcing) which overcomes the disadvantages of ZF(Zero Forcing) scheme in MIMO-FTN scheme using ZF scheme. In this paper, we compared the performance and the transmission rate of the MIMO-FTN scheme based on the hierarchical space-time coding, the MIMO-FTN scheme using W-ZF and the SISO-FTN scheme. As a result, the MIMO-FTN scheme using the W-ZF scheme is two times better than the other two schemes. 본 논문에서는 무선 통신에서의 높은 전송률과 신뢰도 있는 무선 통신 방안 중 터보 부호를 이용한 MIMO(Multiple Input Multiple Output) 통신 기법과 FTN(Faster Than Nyquist) 기법을 접목시켜 전송률을 향상시키며 신뢰성을 높일 수 있는 복호 방법을 제안한다. 기존의 계층적 시공간 부호화 기반의 MIMO-FTN(Multiple Input Multiple Output-Faster Than Nyquist) 기법은 FTN으로 인한 인접 심볼 간섭을 제거하기 위한 시공간 부호화 방식의 적용으로 전송률의 손해를 초래한다. 이러한 문제점을 해결하기 위해 본 논문에서는 ZF(Zero Forcing) 기법을 이용한 MIMO-FTN 기법에서 ZF 기법의 단점을 보완한 W-ZF(Weighted-Zero Forcing)을 이용한 방식을 제안한다. 본 논문에서는, 시뮬레이션을 통해 계층적 시공간 부호화 기반의 MIMO-FTN 기법과, W-ZF을 적용한 MIMO-FTN 기법, SISO-FTN 기법에서 FTN의 간섭량에 따른 성능과 전송률을 비교 하였다. 그 결과 W-ZF 기법을 적용한 MIMO-FTN 기법이 다른 두 기법보다 전송률에서 2배 더 좋은 것을 확인할 수 있다.

단백질 흡착성을 갖는 막 크로마토그래피용 재생 셀룰로오스 기반 음이온 교환 다공성 분리막의 제조

서정현,이홍태,김태경,조영훈,오택근,박호식,Seo, Jeong-Hyeon,Lee, Hong-Tae,Kim, Tae-Kyung,Cho, Young-Hoon,Oh, Taek-Keun,Park, HoSik 한국막학회 2022 멤브레인 Vol.32 No.5

With the development of the bio industry, membrane chromatography with a high adsorption efficiency is emerging to replace the existing column chromatography used in the downstream processes of pharmaceuticals, food, etc. In this study, through the deacetylation reaction of two commercial cellulose acetate (CA) membranes with different pore sizes, the porous regenerated cellulose (RC) supports for membrane chromatography were obtained to attach the anion exchange ligands. The adsorptive membranes for anion exchange were prepared by attaching an anion exchange ligand ([3-(methacryloylamino) propyl] trimethylammonium chloride) containing quaternary ammonium groups on the RC supports by grafting and UV polymerization. The protein adsorption capacities of the prepared membranes were obtained through both the static binding capacity (SBC) and the dynamic adsorption capacity (DBC) measurement. As a result, the membrane chromatography with the smaller the pore size, the larger the surface area showed the highest protein adsorption capacity. Membrane chromatography which was prepared by using deacetylated commercial CA support with MAPTAC ligand (i.e., RC 0.8 + MAPTAC: 43.69 mg/ml, RC 3.0 + MAPTAC: 36.33 mg/ml) showed a higher adsorption capacity compared to commercial membrane chromatography (28.38 mg/ml).

AC PDP의 구동 방법과 개발 동향

서정현,Seo, Jeong-Hyeon 한국정보디스플레이학회 2001 한국정보디스플레이학회지 Vol.2 No.4

OFDM 전송시스템의 새로운 채널 보상 및 등화 기법

서정현,이현,정차근,조경록,Seo, Jung-Hyun,Lee, Hyun,Cheong, Cha-Keon,Cho, Kyoung-Rok 한국통신학회 2003 韓國通信學會論文誌 Vol.28 No.12A

본 논문에서는 OFDM (Orthogonal Frequency-Division Multiplexing)방식을 적용하는 ITS (Intelligent Traffic System) 시스템에서 페이딩 채널을 보상하기 위한 새로운 기법을 제안한다. 기존의 방법과는 달리 파일럿 채널을 이용한 채널 보상 회로에 나눗셈이 없고 간단한 구조의 성능을 저하시키기 않은 알고리즘을 제안하여 회로의 동작 속도와 크기에서 이점을 얻는다. 또한 제안한 회로는 빠른(fast) 페이딩에서 생긴 왜곡을 먼저 보상하고 채널과 심벌의 간섭을 단일 탭 등화기로 제거하여 이중 채널 보상 효과를 얻는다. 모든 알고리즘은 디지털 시스템 구현에 적합하게 제시되고 검증된다. 본 논문의 채널 보상 방법으로 하드웨어 구현 시 사이즈가 20%감소하며. 16-QAM (16-Quadrature Amplitude Modulation)방식의 ITS모뎀에 적용 시 SNR (Signal-to-Noise Rate)이 l0dB 이하에서 3dB정도 BER (Bit Error Rate)이 개선된 결과를 얻었다. A new fading channel estimation technique is proposed for an OFDM based modem In the ITS system. The algorithm is based on the transfer function extraction of the channel using the pilot signals and compensated the channel preceding the equalization. The newly derived algorithm is division-free arithmetic operations allows the faster circuit operation and the smaller circuit size. Proposed techniques compensate firstly the distortion which is generated at fading channels and secondly eliminate inter-symbol interference. All algorithms are suitability estimated and improved for a system implementation using digital circuits. As the results, the circuit size is reduced by 20% of the conventional design and achieved about 10% performance improvement at low SNR under 10dB in case of ITS system adapted 16-QAM mode.

Long Gap 구조의 구동과 방전효율에 관한 연구 동향

서정현,Seo, Jeong-Hyeon 한국정보디스플레이학회 2010 인포메이션 디스플레이 Vol.11 No.3

물의 위생

서정현,Seo, Jeong-Hyeon 한국학교보건협회 1977 학교보건 Vol.4 No.-

발광층 구조에 따른 백색 인광 OLED의 발광 특성

서정현,백경갑,주성후,Seo, Jung-Hyun,Paek, Kyeong-Kap,Ju, Sung-Hoo 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.6

We studied the emission characteristics of white phosphorescent organic light-emitting diodes (PHOLEDs), which were fabricated using a two-wavelength method. To optimize emission characteristics of white PHOLEDs, white PHOLEDs with red/blue, blue/red and red/blue/red emitting layer (EML) structures were fabricated using a host-dopant system. In case of white PHOLEDs with red/blue structure, the best efficiency was obtained at a structure of red (15 nm)/blue (15 nm). But the emission color was blue-shifted white. In case of white PHOLEDs with blue/red structure, the better color purity and efficiency were observed at a blue (29 nm)/red (1 nm) structure. For additional improvement of color purity in white PHOLEDs with blue (29 nm)/red (1 nm) EMLs, we fabricated white PHOLEDs with red (1 nm)/blue (28 nm)/red (1 nm) structure. The current efficiency, external quantum efficiency, and CIE (x, y) coordinate were 27.2 cd/A, 15.1%, and (0.382, 0.369) at 1,000 $cd/m^2$, respectively.

교류 구동 방법에 의한 유기전계발광소자 발광 특성의 모델

서정현,주성후,Seo, Jung Hyun,Ju, Sung Hoo 한국재료학회 2021 한국재료학회지 Vol.31 No.10

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9 % for luminance, and 1.9 % for luminous efficiency.