http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박면주,전대인,안병철,남상욱 한국통신학회 1996 韓國通信學會論文誌 Vol.21 No.7
This paper presents a full-wave, moment method analysis of a Moreno directional coupler with tow crossed-slots between two crossed rectangular waveguides. the overall structure is divided into several rectangular waveguides and cavities by the use of the equivalence principle to the complex slot regions. this enables a simple and efficient analysis involving the well-known retangular waveguide/cavity Green's functions. For a numerically efficient simulation, the roof-top basis expansion and line testing is used and an acceleration technique is applied to the series summation in the Green's functions. The numerical results are compared with the measurements to verify the correctness of the present analysis.
박면주,남상욱 한국통신학회 1996 韓國通信學會論文誌 Vol.21 No.12
This paper proposes a new absorbing boundary condition(ABC) for the FDTD simulation of waveguide problems. It is based on the exact analytic expression for the time domain EM wave propatation in the waveguide. The ABC derived from the expression has a convolution form whose kernel (the discrete Green's function) has a simple, closed form formula. Also, it is applicable to the wide variety of waveguide types with conducting boundaries and complex cross-sectional shapes.
유전체 기판 위에 놓인 스트립 형태의 도파관 마운트 해석
박면주,한석태,남상욱 한국통신학회 1996 韓國通信學會論文誌 Vol.21 No.9
이 논문에서는 모드정합법과 유도(induced) EMF방법을 이용하여 유전체 기판상에 놓인 스트립 형태의 도파관 마운트의 입력 임피던스 특성을 해석하였다. 도파관 내에 유전체 기판이 존재하는 부분을 단면의 일부가 유전체로 채워진 도파관으로 모델링하여, 이 구조에 대한 하이브리드(hybrid) 모드 해석을 수행하였다. 여기서 계산된 모드함수들을 이용하여 유전체 기판에 의한 전자파 산란문제를 모드정합법으로 풀었다. 그리고, 이 결과와 유도 EMF방법을 이용하여 마운트 간극에서 본 입력 임피던스를 계산하였다. 여기서 얻어진 계산 결과를 다른 수치해석법에 의한 계산결과와 비교하여 그 타당성을 검증하였으며, 기판의 폭이나 마운트 간극의 위치등의 파라미터가 임피던스에 미치는 영향을 고찰하였다. This paper presents the analysis of the impedance characteristic of the strip type waveguide mount backed by the dielectric substrate using mode the matching and induced EMF method. The part of the waveguide containing the dielectric substrate is modeled as waveguide partially filled with the dielectric, and a hybrid mode analysis has been conducted for the structure. The electromagnetic scattering problem by the dielectric substrate is solved by the mode matching method using the calculated modal function. The input impedance seen at the mount gap is calculated by the induced EMF method using the calculated results. the calculated results thus obtained has been verified through comparison with the results by other numerical methods. The effect of some structure parameters such as the width of the substrate and the gap size on the mount impedance is investigated.
구형 도파관 모델에 의한 직사각형 전원평면의 임피던스 계산
박면주,이병제,Park Myun-Joo,Lee Byungje 한국전자파학회 2004 한국전자파학회논문지 Vol.15 No.12
본 논문에서는 직사각형 전원평면에 대한 새로운 해석적 모델과 그에 기반한 임피던스 표현식을 제시하였다. 제안된 방법에서는 전원평면 구조를 그 둘레에 적당한 경계 조건을 가지는 일정 길이의 직사각형 도파관으로 모델화 하였다. 그 결과 제안된 모델에 기반하여 유도된 임피던스 표현식이 1차원 급수형태로 나타나며, 이는 기존에 제안된 전원평면의 구형 공동 모델에 기반한 임피던스 식에 비해 계산 효율을 크게 높일 수 있다. A novel impedance model is proposed fur the rectangular power plane along with the analytic impedance expression derived from it. The power plane is modeled as a section of a rectangular waveguide with appropriate boundary conditions around its periphery. As a result, the derived impedance expression based on the proposed model has the one-dimensional series form, which is simpler and computationally more efficient than the existing formula based on cavity model of the power plane.
박면주,이병제 한국ITS학회 2007 한국ITS학회논문지 Vol.6 No.2
A new impedance transforming balun scheme is presented based on the branch-line structure with stubs on the vertical branches. The stubbed vertical branch eliminates the unwanted even mode ouput and provides only the balanced output of the balun with opposite phase. Also, the use of stubs reduces the branch lengths by two times the stub length, which is useful for the compact balun design. 본 논문에서는 스터브(stub) 선로를 이용한 새로운 방식의 분기 선로(branch line) 발룬 구조를 제안한다. 수직 브랜치에 스터브 선로를 부착하여 발룬의 출력 신호에서 불필요한 우모드 출력을 제거하고 180도 위상차를 가지는 출력 신호만 산출되도록 하였다. 또한 스터브 선로를 사용함으로서 해당 브랜치 선로의 길이를 스터브 길이의 2배만큼 줄일 수 있기 때문에 소형화된 발룬 설계에도 유용하게 사용될 수 있다.
박면주 한국ITS학회 2024 한국ITS학회논문지 Vol.23 No.1
본 논문에서는 크로스오버 접합에서 출력 위상을 고려한 회로해석 및 설계 방법을 제시한 다. 먼저 even-odd 분석을 통해 임의의 위상을 가지는 크로스오버 접합이 만족시켜야 할 반사 계수 및 임피던스 파라미터에 대한 일반해를 해석적으로 유도하였다. 또한 주어진 일반해를 실제적인 크로스오버 접합회로 구조에 적용하여 임의의 츨력 위상값을 가지는 크로스오버 접 합의 정확한 설계 공식을 도출하였으며 그 결과가 기존의 연구에서 제시된 결과와 부합함을 확인하였다. 이를 이용하여 설계된 회로가 설계목표와 일치하는 정확한 출력 위상을 가지는 크로스오버 접합으로서의 성능을 만족하는 것을 입증하였다. This paper presents the analysis and the design methods of the crossover junctions including the output phase. The general solutions were derived analytically through an even-odd analysis of the reflection coefficients and the impedance parameters for the crossover junction with arbitrary output phase. The general solutions were applied to a real crossover junction structure to derive the exact design formula for the arbitrary output phase. The results agreed well with the existing studies. The designed circuit satisfied the crossover junction operation with the exact output phase.