http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
AISI 304L 오오스테나이트 스테인레스 강 용접부 의 Low Cycle Fatigue 거동에 관한 연구
김환태,황선효,남수우 대한용접접합학회 1984 대한용접·접합학회지 Vol.2 No.1
The influence of weld defect, residual stress and microstructure on the Low Cycle Fatigue(L. C. F.) behaviour of AISI 304L austenitic stainless steel weldment has been studied. The specimens were welded by shielded metal are welding process, post weld heat treated(PWHT) at 900.deg.C for 1.5hrs, and tested under total strain controlled condition at room temperature. The results of the experiment showed that weld defect affected the L.C.F. behaviour of weldment deleteriously compared to the residual stress or microstructure, and it reduced the L.C.F. life about 70-80%. The PWHT exhibited beneficial effect on the L.C.F. behaviour and increased the L.C.F. life about 120%. This enhancement by PWHT was attributed to the removal of residual stress and recovery of weld metal ductility. The cyclic stress flow of as welded specimens showed intermediate cyclic softening, whereas those of heat treated specimens showed continuous cyclic hardening, and this difference was explained in terms of the residual stress removal and dislocation behaviour. Scanning electron microscopy studies of fatigue fracture surface showed that weld defects of large size and near weld surface were detrimental to the L.C.F. behaviour of weldment.
김환태,길상철 대한용접접합학회 2004 대한용접·접합학회지 Vol.22 No.4
최근 산ㆍ학ㆍ연 등 각 분야에서 관심 있는 주요산업 기술에 대한 종합적이고 신뢰성 있는 분석정보의 수요가 증대하고 있으나, 실제 연구 분석기관들을 통한 공급은 미미한 상태이며, 특히 용접기술분야의 경우는 그 실적이 매우 저조한 실정이다. 따라서 한국과학기술정보연구원(KISTI)에서는 최근 시장성, 기술성 면에서 분석이 필요하다고 여겨지는 용접기술분야 중 알루미늄 합금으로 제작되는 수송기기의 용접기술을 분석대상 기술로 선정하여 기술과 학술정보동향 분석, 특허 정보 분석을 수행하였다.(중략)