Divinyl Sulfone으로 가교된 히알루론산 마이크로비드의 특성평가

김진태,이득용,장주웅,김태형,장용운,Kim, Jin-Tae,Lee, Deuk Yong,Jang, Ju-Woong,Kim, Tae-Hyung,Jang, Yong-Wun 대한의용생체공학회 2013 의공학회지 Vol.34 No.3

Hyaluronic acid(HA) microbeads were synthesized by dropping the sodium hyaluronate(Streptococcus) solutions in NaOH into a solution mixture of divinyl sulfone(DVS) in 2-methyl-1-propanol, followed by stirring, cleaning and drying process at room temperature. The initial experimental conditions are crosslinking time(CLTi) of 5 h, crosslinking temperature(CLTe) of room temperature, injection air pressure(IAPr) of 5 psi, and DVS concentration( DVSc) of 0.2 vol%, respectively. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the size of the beads. The microbead size pattern was not regular to function of the degree of crosslink. It was observed that the swelling ratio, the degree of crosslink, and the pore size can be controlled by adjusting the CLTi, CLTe and DVSc. Among the parameters investigated, the smallest bead size can be achieved by varying the CLTi parameter. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by varying CLTe.

웅예선숙 식물인 갯기름나물(식방풍)의 개화 특성 및 세대촉진 방법

김진태,조호준,유홍섭,박영상,김지석,정용혁,양태진,Jin Tae Kim,Ho Jun Joh,Hong Seob Yu,Young Sang Park,Ji-Seok Kim,Yong Hyeok Jeong,Tae-Jin Yang 한국자원식물학회 2023 한국자원식물학회지 Vol.36 No.4

본 연구는 갯기름나물의 개화특성 및 수정능력을 파악하여 육종의 기초자료로 이용하고자 수행되었다. 개화기 관찰 결과, 소화서 내 소화들은 바깥쪽에서부터 중앙쪽 방향으로 5일의 시차를 두고 개화하였다. 단일 소화는 웅예선숙형 특성을 가지며 개화와 더불어 화분은 5일간 유지되었고, 자예는 개화후 8일차 부터 발달하여 13일까지 임성을 유지하였다. 화분은 웅예출현 직후 2일째에 활력이 대폭 증가하였지만 하루만에 급감하였다. 동일화서 내 자가수정능력을 확인한 결과, 일부에서 자식성종자를 결실하였고, DNA 마커에 의해 자가수정 개체임이 확인되었다. 개체내 분지는 주경을 기점으로 영양상태에 따라 최대 4차지경까지 분지되며, 지경 화서 간 평균 8일 동안 자예 활성, 화분 활력시기가 중복되어 다른 가지의 화서간 자가수정이 가능하다고 판단된다. 노지에서 생육 후 12월 말까지 춘화처리 된 개체들을 12월 말에 온실내에서 생식생장을 유도하고 5월에 채종함으로써 개화시기를 약 4개월정도 단축시킬 수 있었다. 채종한 종자는 5~6월에 파종하고 영양생장 후 12월 말까지 춘화처리 후 5월에 채종할 수 있어 기존2년 1세대 육종기간을 1년 1세대로 단축할 수 있었다.

지/단락실증시험에서 MW급 계통연계형 ESS 절연/보호시스템 성능 분석에 관한 연구

김진태,이승용,박상진,차한주,김수열,Kim, Jin-Tae,Lee, Seung-Yong,Park, Sang-Jin,Cha, Han-Ju,Kim, Soo-Yeol 한국전력공사 2020 KEPCO Journal on electric power and energy Vol.6 No.2

With recent ESS (Energy Storage System) fire accident, the fault protection performance is becoming more important. However, there has never been any experiments with the protection performance on the faults in the ESS system level. In this study, the effect of AC ground fault and IGBT (Insulated Gate Bipolar mode Transistor) short-circuit failure on MW class ESS was performed experimentally for the first time in the world. First of all, the effect of the AC single line ground fault on battery was analyzed. Moreover, the transient voltage was investigated as a function of the battery capacity and the power level. Finally, the breaking capability and insulation performance of ESS were examined under PCS short-circuit fault condition. Through the tests, it was found that ESS protection system safely blocked the faulty current regardless of the faults, whereas the electronic parts such as IGBT and MC (Magnetic Contactor) were broken by the fault current. Also, the electrical breakdown in ESS resulted from the transient voltage during the protection process.

낭성 변화없이 하악과두로 이동한 하악 제3대구치

김진태,조명철,전국진,박광호,허종기,Kim, Jin-Tae,Cho, Myung-Chul,Jeon, Kug-Jin,Park, Kwang-Ho,Huh, Jong-Ki 대한악안면성형재건외과학회 2008 Maxillofacial Plastic Reconstructive Surgery Vol.30 No.2

Impacted third molars of the mandible are generally found at or close to the second molar. If the third molar is impacted far distant from its original site, it may be affected by cysts or tumors. Ectopic impaction of third molar in the condyle area is very rare. Furthermore, impaction without cystic lesion is even less common. The etiology of migration of the mandibular third molar without cystic lesion is unknown. So periodical X-ray taking is essential.

실시간 맥박 및 혈압 측정을 위한 폴리머 기판 압력센서 개발

김진태,김성일,정연호,Kim, Jin-Tae,Kim, Sung Il,Joung, Yeun-Ho 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.9

In this study, we introduce a polymer(polyimide) based pressure sensor to measure real-time heart beat and blood pressure. The sensor have been designed with consideration of skin compatibility of material, cost effectiveness, manufacturability and wireless detection. The designed sensor was composed of inductor coils and an air-gap capacitor which generate self-resonant frequency when electrical source is applied on the system. The sensor was obtained with metalization, etching, photolithography, polymer adhesive bonding and laser cutting. The fabricated sensor was shaped in circular type with 10mm diameter and 0.45 mm thickness to fit radial artery. Resonant frequencies of the fabricated sensors were in the range of 91~96 MHz on 760 mmHg pressurized environment. Also the sensor has good linearity without any pressure-frequency hysteresis. Sensitivity of the sensor was 145.5 kHz/mmHg and accuracy was less than 2 mmHg. Real-time heart beat measurement was executed with a developed hand-held measurement system. Possibility of real-time blood pressure measurement was showed with simulated artery system. After installation of the sensor on skin above radial artery, simple real blood pressure measurement was performed with 64 mmHg blood pressure variation.

유치(乳齒) 치근(齒根) 흡수(吸收)에 관(關)한 연구(硏究)

김진태,Kim, Jin-Tae 대한소아치과학회 1977 大韓小兒齒科學會誌 Vol.4 No.1

178 naturally exfoliated maxillary deciduous central incisors, 149 deciduous lateral incisors of children at exfoliation stage were studied on the degree and the tendency of the root resorption, and the age of exfoliation of the deciduous central and lateral incisors. The results were as follows; 1. The root of maxillary deciduous central and lateral incisors tended to be resorbed disto-lingually. 2. The age of exfoliation of maxillary deciduous central incisor was 7.27 year in male, 7.01 year in female, and the age of exfoliation of maxillary deciduous lateral incisor was 8.22 year in male, 7.77 year in female. 3. The exfoliation age of maxillary deciduous central and lateral incisors was earlier in female than in male.

인체 삽입용 LC 공진형 혈압 센서 디자인 및 제작

김진태,김성일,정연호,Kim, Jin-Tae,Kim, Sung Il,Joung, Yeun-Ho 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.3

In this paper, we present a MEMS (micro-electro-mechanical system) implantable blood pressure sensor which has designed and fabricated with consideration of size, design flexibility, and wireless detection. Mechanical and electrical characterizations of the sensor were obtained by mathematical analysis and computer aided simulation. The sensor is composed of two coils and a air gap capacitor formed by separation of the coils. Therefore, the sensor produces its resonant frequency which is changed by external pressure variation. This frequency movement is detected by inductive coupling between the sensor and an external antenna coil. Theoretically analyzed resonant frequency of the sensor under 760 mmHg was calculated to 269.556 MHz. Fused silica was selected as sensor material with consideration of chemical and electrical reaction of human body to the material. $2mm{\times}5mm{\times}0.5mm$ pressure sensors fitted to radial artery were fabricated on the substrates by consecutive microfabrication processes: sputtering, etching, photolithography, direct bonding and laser welding. Resonant frequencies of the fabricated sensors were in the range of 269~284 MHz under 760 mmHg pressure.

뇌종양 확산강조영상에서 High B-value의 유용성 평가

김진태,변재후,박용성,이래곤,황선광,Kim, Jin-tae,Byun, Jae-Hu,Park, Yong-Seong,Lee, Rae-Gon,Hwang, Seon-Kwang 대한디지털의료영상학회 2015 대한디지털의료영상학회논문지 Vol.17 No.1

This study attempts to examine the clinical usefulness of High b-value DWI (diffusion weighted imaging) for brain tumors with an edema. Subjects were seven patients selected from 65 patients who received an MRI scan for suspected encephalopathy and confirmed diagnosis at our hospital from February to July 2015 (male: 7, average age : 66 years old). As test equipment, 3.0T MR System (ACHIEVA Release, Philips, Best, The Netherlands) and 8Channel SENSE Head Coill were used. DWI checks on the use of the variable TR 5460ms, TE 132ms, Slice Thickness 4mm, gap 1mm, Slice number 29 is, 3D T1WI is TR 8.4ms, TE 3.9ms, matrix size $240{\times}240$, Slice can set 180 piecesIt was. b value of 0, 1,000, 2,000 s/mm2 with DWI acquisition and 3D T1WI enhancement five minutes after the Slice Thickness 3mm, gap 0mm to reconstruct the upper face axis (MPR TRA CE) was. As for the experiment, in b-value 1,000 and 2,000 images, SNR and the lesion at the lesion site and CNR in the normal site opposite to the lesion are measured. WW(window width) and WL(window level) are made equal in MRICro software, and the volume of the lesion is measured from each of b-value and MPR TRA CE image. Using SPSS ver. 1.8.0.0 Mann Whitney-test was analyzed for SNR and CNR, while Kruskal-Wallis test was analyzed for volume.

TM/TC를 탑재한 분산제어 시스템의 실시간 제어기 설계와 구현

김진태,박인갑,Kim, Jin-Tae,Park, In-Kap 한국전기전자학회 1999 전기전자학회논문지 Vol.3 No.1

DCS는 분산된 컴퓨터 네크워크를 이용한 통합된 EIC의 다양한 응용기술을 적용할 수 있는 원격 감시 제어가 요구되고 있다. 현재까지는 DCS는 원격 사이트의 플랜트에 대해 실시간성 보장은 기대에 미치지 못한다. 본 논문에서는 효율적인 TM/TC 시스템을 위한 각 제어기를 기존의 PRS 하드웨어와 GWS, RPS, SRS로 광역화에 맞도록 설계하였으며, 또한 각 구현된 제어기의 실시간을 만족하는 통신처리시간, 시스템 부하율을 분석하여 타당성을 검토하였다. DCS require a remote supervisory control that applies a various applications with a period of integrated EIC(electric instrument control) using distributed computer network. Until now, DCS has leaved something to be desired in guaranteeing real-time required in remote site plant. In this paper, each controller is designed by implementing the controller suiting with an wide area to enhance the hardware of existing PRS controller and GWS, RPS and SRS, for the efficiency of TM/TC system, Therefore, real-time emphasizes on the communication processing time, rate of system load analyzed and validity was evaluated for a each implemented controllers.

유관기관칼럼 - 중소기업의 원초적 죄

김진태,Kim, Jin-Tae 기술표준원 2009 기술표준 Vol.92 No.-