http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연소 화염법에 의한 다이아몬드 합성에 미치는 기판표면탄소의 효과
김성영,이재성,Kim, Seong-Yeong,Lee, Jae-Seong 한국재료학회 1996 한국재료학회지 Vol.6 No.2
연소화염법을 이용한 다이아몬드 박막합성은 기판의 표면상태에 크게 의존한다. 특히 탄소결합상이 기판에 조재하는 경우 다이아몬드 핵생성과 성장은 크게 영향을 받는다. 본 연구에서는 일정한 흡입가스비율(R=O2/C2H2)과 기판온도 조건의 연소화염법을 이용하여 몰리브덴 기판위에 다리아몬드박막을 합성하는 과정에서 박막의 핵생성에 미치는 기판 탄소화합물의 영향을 조사하였다. Mb 금속기판표면에 형성된 탄화물로는 Mo2C상과 soot를 택하여 박막합성 전에 Mo기판상에 형성시켰다. Mo 금속기판표면에 형성된 탄화물(Mo2C)상에는 다이아몬드 핵생성과 입자성장이 촉진되어 가장 조대한 양질의 다이아몬드 입자가 형성되었다. 이것은 탄화물상이 반응가스중의 탄소의 확산을 저지함과 동시에 핵생성의 필요한 잠복기간을 감소키켰기 때문이다. 그러나 soot를 구성하는 미세한 탄소결합상들이 다이아몬드 핵생성 장소로 작용하여 결과적으로 다이아몬드 수밀도가 가장 크게 관찰된 반면, 입자성장은 Mo2C기판에 비해 작았다.
RF PCVD 에 의한 DLC 박막합성과 Tribology특성평가
김성영,이상현,신승용,고명완,Kim, Seong-Yeong,Lee, Sang-Hyeon,Sin, Seung-Yong,Go, Myeong-Wan 한국재료학회 1997 한국재료학회지 Vol.7 No.12
DLC(diamond-like carbon)박막을 RF PCVD법으로 증착하여 일반적인 증착특성과 마찰.마모특성사이의 관계를 알아보기 위해, 증착속도, 박막경도, 내무압축응력 및 박막내의 수소량 측정을 통해 일반적인 증착특성을 조사하였다. 그리고 증착된 박막의 C-H 결합구조와 물질특성 분성을 위해 각각 FTIR 및 Raman분광분석을 행하였다. 박막의 마찰계수와 내마모특성은 Pin-on-disk형 마찰시험기를 이용하여 상기의 증착조건과의 상관관계를 조사하였다. DC self-bais, 즉 충돌에너지가 커지면 박막의 증착속도와 경도는 대체로 증가하고, 박막내의 압축응력은 최대값을 가지다가 다시 감소됨을 알 수 있언ㅆ다. 또한 박막내의 수소량은 급격히 감소하다가 포화됨을 알 수 있었다. 얻어진 박막의 마찰계수는 최소 0.08로 분위기가 dry일 때 더 작으며 내마모성은 이온의 충돌에너지와 밀접한 관계를 가지며 모재인 Si-wafer보다 훨씬 큼을 알수 있었다.
MLR과 PLS를 이용한 PET 중합공정 에스테르화 반응기의 실험적 모델 개발
김성영,이범석 경희대학교 산학협력기술연구원 2004 산학협력기술연구논문집 Vol.10 No.1
Multiple linear regression(MLR) and paπial least square(PLS), have been applied to predict reactor properties and a product quality of a direct esterification reactor for polyethylene terephthalate(PET) synthesis. On the basis of the set of data including the flow rate of water vapor, the flow rate of EG vapor, the concentration of acid end groups of a product and other operating conditions such as temperature, pressure, reaction times and feed monomer mole ratio, two multi-variable analysis methods have been applied. Their regression and prediction abilities also have been compared. The prediction results are critically compared with the actual plant data and the other mathematical model based results in reliability. This paper shows that PLS method approach can be used for the reasonably accurate prediction of a product quality of a direct esterification reactor in PET synthesis process.
연소 화염법에 의해 합성된 다이아몬드형상에 미치는 탄화수소량과 온도분포의 영향
김성영,고명완,이재성,Kim, Seong-Yeong,Go, Myeong-Wan,Lee, Jae-Seong 한국재료학회 1994 한국재료학회지 Vol.4 No.5
연소화염법을 이용한 다이아몬드 박막합성시 기판표면온도 및 온도분포에 가장 크게 작용하는 공정변수는 탄화수소량을 결정하는 산소/아세틸렌 가스의 혼합비(R=O/sub 2/C/sub 2/H/sub 2/)이다. 본 연구에서는 혼합가스비율 변화 (R=0.87-0.98)에 따른 기판표면온도 및 온도분포를 측정하고, 이들 변수에 따른 다이아몬드 박막의 생성 및 결정형상의 변화과정을 SEM관찰, Raman 분광분석 및 X-선 회절 분석을 통해 조사하였다. 혼합가스비율의 증가에 따라 다이아몬드의 생성입자 수밀도는 감소하였고, 이와 동시에 결정형상도 (111)면과 (100)면이 혼재된 cobo octahedron형에서 octahedron인 (111)면으로 변화되었다. 한편, 기판온도증가에 따라 생성입자의 수밀도가 증가하고 성장속도도 빨라져 조대한 결정을 얻었으며, 생성된 입자형성은 (111)면애 지배적이다가 (100)결정면이 점차 많아지는 양상을 나타내었다. The diamond synthesis by combustion flame method is considerably affected by the substrate surface temperature and its distribution which are mainly controlled by the ratio of mixed gas, $O_2/C_2H_2$. In order to elucidate the role of gas ratio in the diamond synthetic process by combustion flame, under various gas ratios (R=0.87~0.98; R=ratio of flow-rate of $O_2/C_2H_2$ gas) the substrate temperature was measured by using thermal video system and the morphological change of diamond crystals was analysed by using SEM, Raman spectroscope, and X-ray diffraction method. With increasing the gas ratio, i.e., decreasing the hydrocarbon content, the nucleation rate of diamond crystal was lowerd. It was also found that the morphology of diamond crystals changed from the cubo-octahedron type consisting of (100), (111) plane to the octahedron type of (111) plane. The increase of the substrate temperature consistently resulted in the increase of the nucleation rate as well as the growth rate of diamond crystals in which the surface of diamond crystal dominantly consisting of (100) plane.
김성영,노재귀 기전여자대학 1996 論文集 Vol.16 No.-
In order to know the psychological characteristics about the Seoul and Kyung ki do high school student's movtives in the sports participation, 460 boys and girls in their eleventh grade were selectied and examined from four high schools. The results thus abtained are as follows, 1) The students in the humanity cours have a strong inclimation to participate in sports from the recreational, functonal and emotional motives. 2) The students in the matural science course have a high tenlency to take part in sports out of the recreational and emotional motives. 3) The recreational and functional motives are outstanding in the vocational course. 4) In the art course the recreational and emotional ones are important. 5) The order of the student's participation motives is as follow, The highest is the recreational motive. The rest are emotional, functional, accomplisment motive.