http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Health Zone_지금은 여성건강시대 - 봄, 예뻐지고 싶다면 눈을 촉촉하게
김선후,Kim, Seon-Hu 한국건강관리협회 2012 건강소식 Vol.36 No.4
4월 살랑살랑 봄이 오면 예쁘게 차려입고 화장도 하고 봄 마중을 하고 싶은 마음이 간절해진다. 하지만 건조한 날씨와 황사로 인해 눈이 수시로 따갑고 뻑뻑해지며 눈물까지 더 나는 바람에 한껏 예쁘게 한 눈 화장이 지워질까 걱정되어 외출하기가 두려워진다. 왜일까? 이유는 이제는 국민병이라고 불릴 만큼 흔한 안구건조증 때문이다.
김선후,임욱빈 한국국제회계학회 2019 국제회계연구 Vol.0 No.88
This study proved the process that consulting service provided to SMEs leads to management performance through SME management improvement. In the previous study, consulting service measured the perceived consulting service quality including the concept of satisfaction into process quality and result quality, and the process leading to management performance through management improvement was measured by the causal model of BSC perspective. After completing consulting through the SME consulting support project, the questionnaire was distributed to companies that have passed one or two years, and route analysis was performed using the structural equation using 272 copies of the collected questionnaires. The results of this study were as follows: First, the relationship between perceived consulting service quality and non-financial performance was found to be significantly influential, mostly in agreement with previous studies and logical inferences. In particular, the result quality had a greater influence on the company's management improvement than the process quality, and a significant influence relationship was found in both the non-financial performance of BSC perspective, learning and growth perspective, internal process perspective, and customer perspective performance. This can be inferred from the fact that the consulting results and alternatives are recognized as effective in improving management. Second, the causal relationship between BSC's points of view was also confirmed in relation to management performance through consulting. In particular, the strategic path from consulting to learning and growth performance, internal process perspective, customer perspective, financial perspective was identified. In the process of consulting effectively affecting management performance, internal management improvement occurs first through consulting and final financial management performance is achieved through their organic causal relationship. At this point, the indicators of learning and growth were reaffirmed as leading drivers. This study has value and implications in that it presents basic data for related studies such as consulting and management performance. 본 연구는 중소기업에 제공하는 컨설팅서비스가 중소기업의 경영개선을 통해 경영성과로 이어지는 과정을 실증해 보았다. 선행연구를 통해 컨설팅서비스는 만족도 개념이 포함된 지각된 컨설팅서비스품질을 과정품질과 결과품질로 구분하여 측정하였으며, 경영개선을 통한 경영성과로 이어지는 과정은 BSC관점의 인과관계 모형으로 측정하였다. 중소기업컨설팅지원사업을 통해 컨설팅을 완료한 후 1~2년이 경과한 기업을 대상으로 설문지를 배포하여 회수된 설문지 중 272부를 사용하여 구조방정식으로 경로분석을 실시하였다. 본 연구의 결과는 첫째, 지각된 컨설팅서비스품질과 비재무적 성과간의 관계는 유의한 영향 관계가 확인 되었으며 대부분 선행연구 및 논리적 추론과 일치하였다. 특히 결과품질이 과정품질보다 기업의 경영개선에 더 큰 영향을 미쳤고, BSC 관점의 비재무적 성과인 학습과 성장 관점, 내부프로세스 관점, 고객 관점 성과 모두에 유의한 영향관계가 확인되었다. 이는 컨설팅 결과 및 대안이 실제 경영개선에 유효하다고 인식하고 있음을 추론해 볼 수 있다. 둘째, BSC의 각 관점 간 인과관계가 있음을 컨설팅을 통한 경영성과와의 관계에서도 확인할 수 있었다. 특히 컨설팅이 학습과 성장 관점 성과, 내부프로세스 관점 성과, 고객 관점 성과, 재무적 관점 성과로 이어지는 전략적인 경로가 모두 확인 되었다. 컨설팅이 경영성과에 유효한 영향을 미치는 과정은 컨설팅을 통해 내부 경영개선이 먼저 일어나고 그것들의 유기적인 인과관계를 통해 최종 재무적인 경영성과가 달성된다. 이 때 학습과 성장 관점의 지표가 선행동인임이 재확인 되었다. 본 연구는 컨설팅과 경영성과 메커니즘 규명 등의 관련연구에 기초자료를 제시하였다는 점에서 가치와 시사점이 있다.
주관응력효과를 고려한 고강도강 X형 원형강관접합부의 수치해석 연구
김선후,이철호 한국강구조학회 2018 韓國鋼構造學會 論文集 Vol.30 No.2
Internationally representative steel design standards have forbidden or limited the application of high-strength steels to tubular joints, partly because of concerns about their unique material characteristics such as high yield ratio. Most of design standards stipulate that for steels whose yield strengths exceed 355 or 360 MPa, the strength equations cannot be utilized or strength reduction factor below 1.0 should be multiplied. However, the mechanical background behind these limitations is not clear. Experimental testing of high-strength steel CHS (circular hollow section) X-joints recently conducted by the authors also clearly indicated that the current limitations might be unduly conservative. As a continuing work, extensive, test-validated numerical analyses were made to investigate the behavior of high-strength steel CHS X-joint under axial compression. Three steel grades covering ordinary to very high strength steels were considered in the analysis. Again it was found that the high strength penalty to the joint strength in current standards is too severe and needs to be relaxed. The high-strength steel joints under the effects of chord stress generally showed higher strength than the ordinary steel joints and their strengths were conservatively predicted by current standards. It is also emphasized that current format of the CHS X-joint strength equation does not reflect observed behavior and needs to be recast. 고강도 강재의 높은 항복비와 같은 특이한 물성에 대한 우려 등의 이유로 국내외 대표적인 강구조 설계기준에서는 강관구조에 고강도강재를 적용하는 것을 금지하거나 제한하고 있다. 대부분의 설계기준에서는 강관의 항복강도가 355 또는 360MPa을 초과하는 경우 제시된 설계강도식을 사용할 수 없거나 강도저감계수를 통해 설계강도를 낮추어야 한다. 반면 이러한 제한사항에 대한 역학적 근거는 명료하지 않다. 또한 최근 저자들에의해 수행된 X형 원형강관접합부에 대한 실험연구는 고강도강에 대한 규제가 과도하게 보수적일 수도 있다는 점을 지적한 바 있다. 본 연구에서는고강도강 X형 원형강관접합부의 지관 압축 하에서의 거동을 더 자세히 분석하기 위해 실험에 이은 수치해석 변수연구를 수행하였다. 일반 강재부터매우 항복강도가 높은 고강도 강재까지 넓은 범위의 강종을 고려하였다. 본 수치해석 연구에서도 현행의 고강도강 페널티가 매우 보수적이며 완화될여지가 있음을 확인할 수 있었다. 또한 주관 축응력 하에서의 고강도강 접합부의 거동을 분석한 결과 현행 기준식이 고강도강 접합부의 주관 축응력에의한 강도 감소 효과를 보수적으로 예측함을 확인하였다. 일반적으로 주관 축응력이 작용할 때 고강도강 접합부는 일반강 접합부에 비해 접합부 강도를 더 잘 유지하였다. 더불어 현행 기준식의 형태가 실제 접합부 거동을 정확히 표현하는 데에 한계가 있으며 개선될 여지가 있음을 지적하였다.