푸코-데리다의 광기 논쟁에 대한 ‘데리다적’ 독해 -「코기토와 광기의 역사」 다시 읽기-

김민호(Kim, Minho) 서울대학교 철학사상연구소 2021 철학사상 Vol.79 No.-

우리의 목적은 「코기토와 광기의 역사」를 데리다라는 사상가 ‘의’ 텍스트로서 읽음으로써 이 텍스트를 해석할 때 주로 푸코의 이후의 저작들에 조회하는 김은주의 논의를 일정하게 보충하는 데에 있다. 우리는 「코기토와 광기의 역사」에 선행하는 데리다의 두 저작, 즉 『발생의 문제』 및 『《기하학의 기원》에 대한 서설』에서 출발해서 이 논쟁에 개입한다. 이를 위해 우리는 『발생의 문제』 및 『서설』에서 푸코가 데리다를 비판하는 논점들이 앞질러 예고됨을 (2장), 그 함축에 입각하여 「코기토와 광기의 역사」가 감행하는 독해의 의의를 규명하면서 푸코의 데리다에 대한 비판이 데리다에게는 여전히 미진함을(3장), 마지막으로 데리다야말로 『성찰』을 하나의 사건으로 만들고 있음을(4장) 보인다. This article aims to complement Eunju Kim’s reading of “Cogito and the History of Madness,” oriented towards Foucault’s later works, by examining it in the light of Derrida’s early writings on Husserl’s thought, i.e. The Problem of Genesis in Husserl’s Philosophy and Introduction to Husserl’s Origin of Geometry. It argues that the basis of Foucault’s critique of Derrida’s interpretation of Meditations on First Philosophy, as reconstructed by Kim, is not far from that of Derrida’s own philosophy (II). From this viewpoint, Foucault’s critique is refuted in advance within the scope of “Cogito and the History of Madness” (III), which implies that, contrary to what Foucault and Kim believe, Derrida is the one who makes Descartes’ Meditations “an event worthy of its name” (IV).

철 석출장치가 결합된 무산소.호기공정에 의한 인 제거 특성

김민호,김영규,김수복,Kim, Min-Ho,Kim, Young-Gyu,Kim, Soo-Bok 한국환경보건학회 2010 한국환경보건학회지 Vol.36 No.6

In this study, the (phosphorous removal) the characteristics of phosphorous removal due to (the iron compound precipitated) iron compound precipitation by iron electrolysis in (the anoxic. oxic process) anoxic and oxic processes (equipped with the) in an iron precipitation device were analyzed. During the device operation period, the average concentration of BOD, T-N, and T-P were 219.9 mg/l, 54.6 mg/l and 6.71 mg/l, respectively. The BOD/$COD_{Cr}$ ratio was 0.74, and the BOD/T-N and BOD/T-P ratios were 4.0 and 32.8, respectively. The removal rate of (the organic matters) organic matter (BOD and $COD_{Cr}$) was very high at 91.6% or higher, and that of nitrogen was 80.5%. The phosphorous concentration (of the final) in the treated water was 0.43 mg/l (0.05-0.74 mg/l) on average, and the removal efficiency was high at 90.8%. The soluble T-P concentrations in (an) the anoxic reactor, oxic reactor (II) and final treated water were 1.99 mg/l, 0.79 mg/l and 0.43 mg/l, respectively, which indicated that the phosphorous concentration in the treated water was very low. Regardless of the changes in the concentrations of (organic matters) organic matter, nitrogen and phosphorous in the influent, the quality of the treated water was relatively stable and high. The removal rate of T-P somewhat increased with the increase in the F/M ratio in the influent, and it also linearly increased in proportion to the T-P loading rate in the influent. In the treatment process used in this study, phosphorous was removed (using) by the precipitated iron oxide. Therefore, the consumption of organic (matters) matter for biological phosphorus removal was minimized and (most of the organic matters were) was mostly used as the organic carbon source for the denitrification in the anoxic reactor. This (can be an economic) treatment process (without the need for the supply of additional organic matters) is economic and does not require the supply of additional organic matter.

의료서비스에서 고객지향요인이 서비스가치와 고객만족에 미치는 영향

김민호,박창식,서종범,Kim, Min-Ho,Park, Chang-Sik,Seo, Jong-Bum 보건의료산업학회 2008 보건의료산업학회지 Vol.2 No.1

The purpose of this study is to investigate the effects of customer orientation factors in relation to medical services on the values of the service and customer satisfaction and loyalty. Those factors include patient safety and, as found by previous studies, specialization, explanation of what to be medically examined and customer orientation itself. Based on these pervious studies, this study surveyed customers of 7 general hospitals located in Busan to empirically identify relations between customer orientation factors of medical services and the values of the services and customer satisfaction. Results of the study can be summarized as follows. First, this study is very meaningful in that it established a basic theory of patient safety as one of the above customer orientation factors, and tried to empirically demonstrated the theory by applying it to medical services. Second, another of the factors, specialization was found positively affecting the values of medical services, but not affecting customer satisfaction. Customers are likely to choose specialized medical institutions even at higher cost when they undergo an accident or disease. Nevertheless, in factors, whether medical service providers are specialized is not influencing customer satisfaction. This is because medical institutions are failing to properly make recognized their specialization to customers who want to receive specialized medical services. Third, another of customer orientation factors, that is, explanation of what to be medically examined was found not having positive effects on the values of medical services and customer satisfaction. This is probably because enough time was not given for the explanation or because the explanation itself was not provided enough. Fourth, medical service providers' customer orientation was found positively influencing the values of medical services and customer satisfaction. In other words, it seems that customer-centered attitudes and behaviors of medical service providers had positive effects on customers' perception of medical services. Fifth, another of the factors, that is, patient safety was found positively affecting the values of medical services and customer satisfaction. This is probably because medical services' accurate diagnoses and reliable services had positive effects on customers' perception of medical services. Sixth, customers' perceived values of medical services were found having positive effects on customer satisfaction and loyalty. This suggests that the values of medical services are an antecedent variable that directly influences customer satisfaction and loyalty. Seventh, customer satisfaction was found positively affecting customer loyalty. This suggests that customer satisfaction is an antecedent variable of customer loyalty. In conclusion, this study showed that in relation to medical services, customer orientation factors' significant influences on the values of the services and customer satisfaction requires continuous efforts for raising customers' perceived qualities of medical services.

접경지역 빛합계 지수의 지정학·지경학적 함의: 중국 단둥시를 사례로

김민호,지상현,정수열,이승철,Kim, Minho,Chi, Sang-Hyun,Chung, Su-Yeul,Lee, Sung-Cheol 한국경제지리학회 2017 한국경제지리학회지 Vol.20 No.3

본 연구는 DMSP 위성의 OLS 센서에서 촬영된 Stable Lights 영상자료로부터 랴오닝성과 단둥시의 빛합계 지수를 도출한 후 이 지표와 경제 수준 간 관계를 분석하였다. 랴오닝성의 빛합계 지수는 다른 성급 지역의 평균보다 높은 수준이었고, 지난 20여 년 동안 지속적인 증가 추세를 보였다. 실질 성장률과 1인당 평균 임금 등 이 지역의 경제 수준 향상을 지시하는 경제 지표 변화를 잘 반영한다고 볼 수 있다. 그러나 단둥시의 빛합계 지수는 다른 지급시 평균보다 낮은 수준이었는데, 이는 주요 경제 지표에 기초한 이 도시의 경제적 지위와 맥을 같이하는 것으로 보인다. 이전 시기에 비해 1998~2007년 사이 대북무역이 활성화된 단둥시 시할구의 빛합계 지수의 연간 증가율이 높아졌고, 비슷한 기간 동안 북중 교역액과 북한의 대중 수출액도 증가하는 패턴을 보였다. 이 기간 동안 햇볕정책의 영향으로 남 북한 간 긴장 관계가 완화되었던 것을 비추어볼 때, 빛합계 지수는 단둥시의 지정학 및 지경학의 특성을 설명할 수 있는 공간 대안 지표로 활용될 수 있을 것으로 기대된다. This research derived sum of light (SOL) for Liaoning and Dandong, China, from DMSP OLS satellite images acquired at nighttime during 1992 to 2012 and investigated its potential association with economic status. The SOLs of Liaoning were found to be continuously increasing and higher than those of averages for the other provinces across the time period. The temporal pattern of SOLs would be interpreted to well reflect the economic status of this region based on real growth rate and average wage per capita. Nevertheless, the SOLs of Dandong were lower than the average of the other prefecture-level cities, which indicated the economic status of this city in China. Meanwhile, the average annual growth rate of SOLs for Dandong turned out to be increase for 1998~2007, compared with the previous years, and temporal patterns in the trade amount between North Korea and China and the export amount of North Korea to China were similar to those of SOLs in the same time period. The political association between South and North Koreas was improved with 'Sunshine Policy' during 1997~2007. Taking it into account, SOL is expected to be valuable spatial proxy index that could explain the geopolitcal and geoeconomic aspects of Dandong.

고크롬탄화물 하드페이싱 육성용접물의 가공특성과 절삭력 분석

김민호,김태영,Kim, Min-Ho,Kim, Tae-Young 한국생산제조학회 2009 한국생산제조학회지 Vol.25 No.1

Hard facing overlay welding in high chromium carbide is a representative way of extending the fatigue life or recompensing damage, because workpiece surface is uniformly overlay-welded by alloy material. In general, grinding process is currently used for finish due to hardness of weld material. The development of tool material, such as PCBN, has made it possible to use turning instead of grinding. There are many advantages of hard Owning, as lower equipment costs, shorter setup time, fewer process steps, higher material removal rate, better surface integrity and the elimination of cutting fluid. In this paper, machining characteristics and cutting performance are examined to investigate turning possibility of overly welding in high chromium carbide.

외국대학과 외국교육기관 설립에 관한 제언

김민호,Kim, Min-Ho 한국대학교육협의회 2004 大學敎育 Vol.128 No.-

산사태위험지도를 이용한 도로중심 복합재난 위험도 평가

김민호,장창덕,전계원,Kim, Min-Ho,Jang, Chang-Deok,Jun, Kye-Won 한국방재안전학회 2022 한국방재안전학회 논문집 Vol.15 No.3

국내 재해위험지도는 주로 격자단위 및 재해 유형별 단일 재해지도로 제작 및 연구되고 있어 도로관리 중심으로 접근할 경우 그 활용도가 떨어진다. 특히 주로 시설의 유지관리를 담당하는 실무자의 업무활용을 위해서는 보다 해당시설 (지방도로)에 맞는 재해위험지도의 평가방법을 제시할 필요가 있다. 본 연구에서는 산림청에서 제공하고 있는 산사태위험지도 및 토석류위험지도를 활용하여 지방도를 중심으로 위험도를 평가할 수 있는 평가방법을 제시하였다. 또한 강원도에 위치한 지방도를 대상으로 위험도를 평가하고 검증하였다. 평가결과 총연장 234.59 km의 평가구간에서 1,513개의 평가구간에 대한 1~5등급의 위험도를 평가할 수 있었다. Domestic disaster risk maps are mainly produced and studied as a single disaster map by grid unit and disaster type. In particular, it is necessary to present an evaluation method of the disaster risk map that is more suitable for the relevant facility (local road) in order to utilize the work of practitioners who are mainly in charge of facility maintenance. In this study, an evaluation method was presented to evaluate the risk with a focus on local roads by using the landslide risk map and debris flow risk map provided by the Korea Forest Service. In addition, the risk was evaluated and verified for the provinces located in Gangwon-do. As a result of the evaluation, it was possible to evaluate the risk of grades 1 to 5 for 1,513 evaluation sections in the evaluation section with a total length of 234.59 km.

TCP Acknowledgement Compression for Fairness Among Uplink TCP Flows in IEEE 802.11n WLANs

김민호,박은찬,김웅섭,Kim, Minho,Park, Eun-Chan,Kim, Woongsup Institute of Control 2013 제어·로봇·시스템학회 논문지 Vol.19 No.7

This paper deals with the problem of unfairness among uplink TCP (Transmission Control Protocol) flows associated with frame aggregation employed in IEEE 802.11n WLANs (Wireless Local Area Networks). When multiple stations have uplink TCP flows and transmit TCP data packets to an AP (Access Point), the AP has to compete for channel access with stations for the transmission of TCP ACK (acknowledgement) packets to the stations. Due to this contention-based channel access, TCP ACKs tend to be accumulated in the AP's downlink buffer. We show that the frame aggregation in the MAC (Medium Access Control) layer increases TCP ACK losses in the AP and leads to the serious unfair operation of TCP congestion control. To resolve this problem, we propose the TAC (TCP ACK Compression) mechanism operating at the top of the AP's interface queue. By exploiting the properties of cumulative TCP ACK and frame aggregation, TAC serves only the representative TCP ACK without serving redundant TCP ACKs. Therefore, TAC reduces queue occupancy and prevents ACK losses due to buffer overflow, which significantly contributes to fairness among uplink TCP flows. Also, TAC enhances the channel efficiency by not transmitting unnecessary TCP ACKs. The simulation results show that TAC tightly assures fairness under various network conditions while increasing the aggregate throughput, compared to the existing schemes.

산화물 분산강화형 316L 스테인리스강의 제조와 특성 연구

김민호,류호진,김성수,한창희,장진성,권오종,Kim, Min-Ho,Ryu, Ho-Jin,Kim, Sung-Soo,Han, Chang-Hee,Jang, Jin-Sung,Kwon, Oh-Jong 한국분말야금학회 2009 한국분말재료학회지 (KPMI) Vol.16 No.2

Austenitic oxide-dispersion-strengthened (ODS) stainless steel was fabricated using a wet mixing process without a mechanical milling in order to reduce contaminations of impurities during their fabrication process. Solution of yttrium nitrate was dried after a wet mixing with 316L stainless steel powder. Carbon and oxygen contents were effectively reduced by this wet processing. Microstructural analysis showed that coarse yttrium silicates of about 150 nm were formed in austenitic ODS steels with a silicon content of about 0.8 wt%. Wet-processed austenitic ODS steel without silicon showed higher yield strength by the presence of finer oxide of about 20 nm.

후두외상 후 발생한 저음발성 여자환자에서의 라디오전파를 이용한 음도상승 유도 치료 1예

김민호,송기재,최홍식,Kim, Min-Ho,Song, Ki-Jae,Choi, Hong-Shik 대한후두음성언어의학회 2006 대한후두음성언어의학회지 Vol.17 No.1

The factors involved in controlling the vocal pitch are the tension, the mass, the length of the vocal cords and the subglottic pressure. Vocal pitch can be elevated surgically by increasing the stiffness or reducing the vibrating mass of the vocal cords. Recently, we experienced a case of 25 year-old female whose vocal pitch was elevated with radiofrequency surgery of right vocal cord on suspension laryngoscopy. Elevation of vocal pitch(134.11 to 144.73) was noted two months after operation. So we report this case with review of literature.