키네시오 테이핑을 병행한 하프 스쿼트 훈련이 일반인의 몸통과 다리 근활성도 및 균형능력에 미치는 영향

김경훈,Kim, Kyung-Hun 대한고유수용성신경근촉진법학회 2022 PNF and Movement Vol.20 No.2

Purpose: The aim of this study was to identify the effects of performing the half squat exercise with Kinesio taping (HSEKT) on trunk and lower extremity muscle activity and balance ability in general university students. Methods: The 32 participants were randomly assigned to either the HSEKT group (half squats with Kinesio taping) or the control group (half squats with sham Kinesio taping). Both groups performed half squats with either Kinesio taping (HSEKT group) or sham Kinesio taping (control group) for 30 min/day, 3 times/week for 6 weeks. The Noraxon mini direct transmission system (DTS) electromyography (EMG) system was used to evaluate trunk and lower extremity muscle activity. BioRescue equipment was used to measure the movement area of the center of pressure with eyes open and eyes closed. The muscle activity of the trunk and lower extremities and the balance ability of all participants were measured before and after the intervention. An independent t-test was used to statistically analyze the pre- and post-intervention EMG and balance ability results. Results: The trunk and lower extremity muscle activity was found to have significantly improved in the HSEKT group and the control group after the intervention (p < 0.05). Also, the balance ability of the HSEKT group differed significantly after 6 weeks of training compared to that of the control group (p < 0.05). Conclusion: The findings of this study show that performing half squats with Kinesio taping had a positive effect on trunk and lower extremity muscle activity and balance ability in general university students.

EGML 기반 이동 객체 검출 알고리듬의 하드웨어 구현

김경훈,안효식,신경욱,Kim, Gyeong-hun,An, Hyo-sik,Shin, Kyung-wook 한국정보통신학회 2015 한국정보통신학회논문지 Vol.19 No.10

영상에서 움직임이 있는 객체 영역을 검출하기 위한 이동 객체 검출(moving object detection; MOD) 알고리듬을 EGML(effective Gaussian mixture learning) 기반 배경 차분 방법을 적용하여 하드웨어로 설계하였다. EGML 계산 일부의 근사화를 통해 하드웨어 복잡도를 줄였으며, 파이프라이닝 적용을 통해 동작속도를 개선하였다. Verilog-HDL을 이용하여 하드웨어를 설계하였으며, MATLAB/Simulink와 FPGA가 연동된 FPGA- in-the-loop 환경에서 하드웨어 동작을 검증하였다. 설계된 MOD 프로세서는 XC5VSX95T FPGA 디바이스에서 2,218 슬라이스로 구현되었으며, 102 MHz의 클록 주파수로 동작하여 102 MS/s의 처리율을 갖는 것으로 평가되었다. IEEE CDW-2012 데이터 세트의 12가지 영상에 대해 MOD 프로세서의 성능을 분석한 결과, 평균 recall 값은 0.7631, 평균 precision 값은 0.7778, 그리고 평균 F-measure 값은 0.7535로 각각 평가되었다. A hardware implementation of MOD(moving object detection) algorithm using EGML(effective Gaussian mixture learning)- based background subtraction to detect moving objects in video is described. Some approximations of EGML calculations are applied to reduce hardware complexity, and pipelining technique is adopted to improve operating speed. The MOD processor designed in Verilog-HDL has been verified by FPGA-in-the-loop verification using MATLAB/Simulink. The MOD processor has 2,218 slices on the Virtex5-XC5VSX95T FPGA device and its throughput is 102 MSamples/s at 102 MHz clock frequency. Evaluation results of the MOD processor for 12 images in the IEEE CDW-2012 dataset show that the average recall value is 0.7631, the average precision value is 0.7778 and the average F-measure value is 0.7535.

키네시오 테이핑을 병행한 후방보행훈련이 만성 뇌졸중 환자의 하지 근력 및 보행에 미치는 영향

김경훈,Kim, Kyung Hun 대한물리치료과학회 2021 대한물리치료과학회지 Vol.28 No.2

Purpose: The objective of the present study was to examine the effects of Kinesio taping with backward walking training (KTBW) on muscle strength of lower extremity and gait ability in post-stroke patients. Design: Randomized controlled trial. Method: Participants included 27 post stroke patients and were randomly distributed into two groups: KTBW group received Kinesio taping with backward training (n=13), control group receive general physical therapy (n=14). Intervention was given five times a week, a total of four weeks. The subjects evaluated the muscle strength test and walking ability before and 4 weeks after the experiment. Muslce strength of lower extremity was measured by digital manual muscle test. Gait ability was measured by G-walk. Result: After training, the KTBW group showed significant improvement in muscle strength of the lower extremity compared to the control group (p<0.05). KTBW group showed significant improvement in gait ability compared to the control group (p<0.05). Conclusion: These finding show the benefits of the Kinesio taping with backward walking training on the muscle strength of lower extremity and gait ability in post stroke patients.

고속 웹 이송속도 및 복잡한 롤 패턴 형상을 고려한 R2R공정에서의 잉크전달 특성 해석

김경훈,김소희,나양,Kim, Kyung-Hun,Kim, So-Hee,Na, Yang 한국반도체디스플레이기술학회 2010 반도체디스플레이기술학회지 Vol.9 No.2

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

효율 개선을 위한 Cascaded Buck-Boost Converter의 동기식 제어기법

김경훈(Kyung-Hun Kim),박창석(Chang-Seok Park),정태욱(Tae-Uk Jung) 한국조명·전기설비학회 2017 조명·전기설비학회논문지 Vol.31 No.11

This paper proposes a synchronous control method for improving the efficiency of a Cascaded Buck-Boost converter for power supply of marine lantern. Conventional Cascaded Buck-Boost converter have a disadvantage in that the efficiency is reduced due to large conduction loss due to the forward voltage drop of the diode. In order to solve this problem, a synchronous control method was applied to improve the total system efficiency of the converter by replacing the diode of Cascaded Buck-Boost converter with a MOSFET. The validity of the proposed synchronous Cascaded Buck-Boost converter was verified through the analysis of loss and experiment.

CPU 환경에서의 실시간 동작을 위한 딥러닝 기반 다중 객체 추적 시스템

김경훈(Kyung Hun Kim),허준호(Jun Ho Heo),강석주(Suk-Ju Kang) 한국방송·미디어공학회 2020 방송공학회논문지 Vol.25 No.2

Recently, the utilization of the object tracking algorithm based on the deep learning model is increasing. A system for tracking multiple objects in an image is typically composed of a chain form of an object detection algorithm and an object tracking algorithm. However, chain-type systems composed of several modules require a high performance computing environment and have limitations in their application to actual applications. In this paper, we propose a method that enables real-time operation in low-performance computing environment by adjusting the computational process of object detection module in the object detection-tracking chain type system.

해상용 등명기의 태양광 풍력 복합발전시스템 전력변환기 개발

김경훈(Kyung-Hun Kim),박창석(Chang-Seok Park),정태욱(Tae-Uk Jung) 대한전기학회 2017 대한전기학회 학술대회 논문집 Vol.2017 No.7

한국의 현수교분야 기술수준 분석에 관한 연구

김경훈(Kim, Kyung-Hun),이두헌(Lee, Du-Heon) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.10

본 연구에서는 국가의 랜드마크로써 상징적 역할뿐 아니라 물류비용 및 수송비용을 대폭 절감할 수 있는 경제적 가치측면에서 중요한 현수교 시설물을 대상으로 세부적인 기술수준 분석을 실시하고, 중점추진분야를 도출하였다. 분석결과, 한국의 현수교 분야의 기술수준은 선진국 대비 82%의 기술수준으로 도출되었으며, 세부적으로 살펴보면 재료(A) 분야에서 80.2%, 계획 및 설계(B) 분야에서 81.7%, 시공 및 유지관리(C) 분야에서 83.7%의 최고기술 선진국 대비 기술수준이 나타났다. 그리고 본 연구에서는 경제적, 사회적, 기술적 중요도를 분석하여 투자효율이 높을 것으로 판단되는 중점 추진 분야를 도출하였으며, 도출된 항목으로는 “고성능 포장재료” 기술로 나타났다. This study analyzes the technical level and shows the priority technology for suspension bridges that play an iconic role as the country’s landmark and contain an economic value. Analysis results show the technical level of suspension bridge is 82 percent compared to developed countries. In detail, the technical levels of ‘materials’, ‘planning and design’, and ‘construction and maintenance’ are 80.2 %, 81.7%, and 83.7% respectively. This study analyzes economic, social, technical importances and presents ‘high-performance packaging material’ as a priority technology.

소아기 류마티스모양 관절염 소아에서 경험한 지방색전증후군

김경훈 ( Kyung Hoon Kim ),이주경 ( Ju Kyung Lee ),최영훈 ( Young Hun Choi ),김우선 ( Woo Sun Kim ),박준동 ( June Dong Park ),고영률 ( Young Yull Koh ),서동인 ( Dong In Suh ) 대한천식알레르기학회 2013 Allergy Asthma & Respiratory Disease Vol.1 No.1

Fat embolism syndrome is a serious complication that can occur after trauma or operation of the limbs. Clinical criteria are used for the diagnosis of fat embolism syndrome and sometimes radiologic findings are helpful. Fat embolism syndrome is known to occur less frequently in children than in adults, but there is an increased risk in children with connective tissue disease. However, there are only a few reported cases of fat embolism syndrome in juvenile rheumatoid arthritis which is the most common connective tissue disease in children. We report a case of fat embolism syndrome diagnosed in a 13-year-old boy with juvenile rheumatoid arthritis, which was treated with corticosteroid. (Allergy Asthma Respir Dis 1(1):94-97, 2013)

펌프카 재고 감축을 위한 반제품 공용화 설계 구현 : H社 펌프카 프레임 조립 공정 중심으로

김경훈(Kyung-Hun Kim),박찬웅(Chan-Woong Park) 한국산업경영시스템학회 2020 한국산업경영시스템학회지 Vol.43 No.4

A manufacturing company should produce its products and make a profit to continue its management. With the adoption of a multi-category small-volume production system, manufacturers that produce concrete pump-cine products are carrying out improvement activities to increase their market share amid the business-to-customer business environment. However, the slump in the construction investment environment has led to a decline in sales of concrete pump trucks. The purpose of holding inventory is to prevent loss of sales opportunities with the rate of change in the sales plan, and reducing the rate of change in the product can reduce unnecessary inventory and, in order to realize this, the goal of reducing inventory can be achieved by reviewing the parts that can be designed for common use. Therefore, to reduce the inventory of concrete pump trucks, semi-finished publicization design is necessary. According to the analysis, the frame assembly process of the 32M model is common. Production capacity can be secured without loss of sales opportunity.