http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심해 및 표층 지자기 자료를 이용한 라우분지 북동부의 열수 분출구 및 해저 지각 구조 연구
곽준영,원중선,박찬홍,김창환,고영탁,Kwak, Joon-Young,Won, Joong-Sun,Park, Chan-Hong,Kim, Chang-Hwan,Ko, Young-Tak 대한자원환경지질학회 2008 자원환경지질 Vol.41 No.1
Fonualei Rift and Spreading Center(FRSC)와 Mangatolu Triple Junction(MTJ) 칼데라는 활동성 후호분지인 라우(Lau)분지 북동쪽에 위치하고 있다. FRSC에서는 심해 견인 및 표층 자력탐사가 수행되었으며, 심해 견인 자력탐사에서 나타나는 해저 지형과 자력계 고도 사이의 거리 변화 영향을 보정하기 위해 Guspi의 상향연속법을 이용하여 동일한 고도에서 측정한 값으로 변환하였다. Parker and Huestis의 역산 알고리즘을 이용하여 해양지각의 자화를 계산하였고, 이로부터 심해저 열수 분출구 탐사와 해저지각 구조를 파악하고자 하였다. FRSC의 심해 견인 자력탐사 결과 해령에서 주로 나타나는 최대 4.5 A/m의 Central Anomaly Magnetization High(CAMH)가 관측되었으며, 남남서-북북동으로 추정되는 해령의 방향은 라우분지 내 주요 확장축의 방향과 일치하는 경향을 보인다. 또한 FRSC에서는 열수 분출구로 의심되는 - 4.0 A/m의 저자화이상이 발견되었다. MTJ 칼데라$(174^{\circ}00'W\;15^{\circ}20'S)$에서는 표층 자력탐사만이 수행되었고, 남남서-북북동 방향으로 함몰된 화륜과 중앙에서 나타나는 CAMH를 통해 칼데라 중심에 활동성 확장축이 존재하는 것으로 판단된다. Fonualei Rift and Spreading Center(FRSC) and Mangatolu Triple function(MTJ) caldera are located in northeastern part of Lau basin which is the active back-arc basin. Deep-tow and surface-tow magnetic surveys are carried out in FRSC. In deep-tow magnetic survey, to compensate for influence of uneven distance between bathymetry and sensor height, magnetic anomaly is continued upward to a level plane by using the Guspi method. We calculate crustal magnetization using Parker and Huestis's inversion algorithm, and try to find the hydrothermal vent and understand the structure of ocean floor crust. The result of deep-tow magnetic survey at FRSC showed that Central Anomaly Magnetization High(CAMH) recorded the max value of 4.5 A/m which is associated with active ridge. The direction of SSW-NNE corresponds with the direction of the principal spreading ridge in Lau basin. The low crustal magnetizaton$(174^{\circ}35.1'W,\;16^{\circ}38.4'S)$ of -4.0 A/m is supposed to correlate with submarine hydrothermal vent. Surface-tow magnetic data were collected in MTJ caldera$(174^{\circ}00'W,\;15^{\circ}20'S)$. The prevailing SSW-NNE direction of collapsing walls and the presence of CAMH at the center of caldera strongly indicate the existence of active spreading ridge in ancient times.
곽준영,정영희,김영일 대한화학회 2023 대한화학회지 Vol.67 No.1
Nanocrystallne WO3 and MoO3 with several different sizes and crystal structures were prepared by simple acid precipitation and subsequent heat treatment. The photochromic (PC) properties of these samples were comparatively investi- gated in powder state by monitoring diffuse reflectance spectral changes after bandgap irradiation. The PC effect of hexago- nal WO3 and monoclinic WO3 strongly depended upon crystallite size rather than crystal structure. The smaller the crystallite size, the better the PC effect. However, orthorhombic WO·H2O and MoO3 having hexagonal and orthorhombic structures did not follow this trend. One consistent result for all WO3 and MoO3 samples is that the heat treatment in air, which changes crystallinity, whether it changes the crystal structure or only the crystallite size, reduces the PC effect. Since the thermal treat- ment reduces the surface oxygen defect sites, we believe that the PC effect of WO3 and MoO3 depends critically on the sur- face oxygen defect sites that serve as deep trap sites for photogenerated electrons and oxygen radical holes. We also found that the proton insertion claimed by double charge injection model is not critical for the PC effect.
곽준영,강정현,성영훈 국방기술품질원 2019 국방품질연구논집 Vol.1 No.2
TQA는 항공기의 추력조절장치이다. 미국의 MPC사에서 직도입하여 T-50 및 FA-50 항공기에 장착하여왔다. 2010년 중기청의 구매 조건부 부품국산화사업으로 승인되어 체계공학의 기반하에 설계를 위한 구조해석, 진동해석, 충 격해석, 안전성평가, 전기적 입·출력 해석 등 일련의 사전 분석을 하였다. SRR, PDR, CDR, TRR의 기술검토회의를 거쳐 세부부품의 가공 부품조립, 개발품에 대한 기능성능시험 및 항공기 장착상태에서의 지상·비행시험을 통하여 개발품의 신 뢰성을 입증하였고, 김항인증을 통하여 항공기에 장착할 수 있는 부품으로 인정을 받아 2018년 개발이 완료되었다. 개발품 은 이미 수출용 항공기에 장착되어 해외에 수출을 할 정도로 신뢰성이 입증되었다. 이러한 부품 국산화를 통하여 외화절감 뿐만 아니라 국내 기술력을 더욱 향상시키고 국가 방위산업에 일익을 담당하리라 생각한다.
국부 및 혼합 Lagrange 승수법을 이용한 영역분할 기반 유한요소 구조해석 기법 개발
곽준영,조해성,신상준,올리비에 보쇼,Kwak, Jun Young,Cho, Hae Seong,Shin, Sang Joon,Bauchau, Olivier A. 한국전산구조공학회 2012 한국전산구조공학회논문집 Vol.25 No.6
본 논문에서는 대규모 구조해석을 위하여 국부(local) 및 전역-국부 혼합(mixed) Lagrange 승수(Lagrange multiplier)를 이용한 새로운 유한요소 영역분할 기법을 제시한다. 제시되는 FETI 알고리즘은 계산 효율성을 향상시키기 위하여 기존의 FETI 기법들에서 사용되어 온 전통적인 Lagrange 승수법과는 달리, 국부 및 전역-국부 혼합 Lagrange 승수를 도입하고 ALF(Augmented Lagrangian Formulation)과의 결합을 유도하여 공유면 문제(interface problem)의 해의 수렴성을 향상 시켰다. 추가적으로, 몇 가지 수치예제 계산을 통해 기존의 FETI-DP 기법과 비교하여 유연도 행렬의 조건수, 계산 시간 그리고 메모리 사용량에 대한 계산결과를 제시하였다. In this paper, a finite element domain decomposition method using local and mixed Lagrange multipliers for a large scal structural analysis is presented. The proposed algorithms use local and mixed Lagrange multipliers to improve computational efficiency. In the original FETI method, classical Lagrange multiplier technique was used. In the dual-primal FETI method, the interface nodes are used at the corner nodes of each sub-domain. On the other hand, the proposed FETI-local analysis adopts localized Lagrange multipliers and the proposed FETI-mixed analysis uses both global and local Lagrange multipliers. The numerical analysis results by the proposed algorithms are compared with those obtained by dual-primal FETI method.
곽준영,황태경,정영희,박주연,강용철,김영일 대한화학회 2018 대한화학회지 Vol.62 No.2
The hexagonal tungsten bronze CsxWO3 nanoparticle was synthesized by a chemical coprecipitation method of ammonium tungstate and Cs2CO3 in acidic condition. This synthetic method for cesium tungsten bronze is reported for the first time as far as we know. The synthesized CsxWO3 as precipitated showed a weak crystallinity of hexagonal unit cell with a crystallite size of about 4 nm without annealing. When the synthesized CsxWO3 was annealed in N2 atmosphere, the crystallinity and crystallite size systematically increased maintaining the typical hexagonal tungsten bronze structure as the annealing temperature increased. The analyzed Cs content in the bronze was about 0.3 vs W, which is very close to the theoretical maximum value, 1/3 in cesium tungsten bronze. According to XPS analysis, the reduced tungsten ions existed as both the forms of W5+ and W4+ and the contents systematically increased as the annealing temperature increased up to 800 °C. The CsxWO3 thin films on PET substrate were also prepared by a wet-coating method using the ball-milled solution of the annealed CsxWO3 nanoparticles at various temperatures. The near-infrared shielding property of these thin films increased systematically as the annealing temperature increased up to 800 °C as expected with the increased contents of reduced tungsten ions.
기술 수준조사 및 분석을 통한 SAR(합성개구면 레이다) 핵심기술 개발방안 연구
곽준영,정대권,Kwak, Jun-Young,Jeong, Dae-Gwon 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.4
SAR(Synthetic Aperture Radar) has the ability to generate high resolution images regardless of a weather condition(e.g. visibility good or poor and day or night, etc.). SAR is considered as one of the most important powers and needs for the future since it has been utilized in a number of important military fields such as early warning, urban defense, missile guidance system, etc. Additionally there are many civilian demands and applications in aviation, traffic control, earth and space explorations, weather forecast etc. This days, the ability to acquire and analyze information is needed to cope with the urgency of global politics and international changes. In this paper, technical survey and development review for SAR systems are investigated to derive the core and immature technologies of domestic defense industry.