http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박용권,이상근,전병준,송현직,이광식,하장호 대한전기학회 2002 전기학회논문지C Vol.51 No.10
- In this paper, fluorescent discharge type ozonizer has been designed and manufactured. Ozone discharge and generation characteristics have been investigated in accordance with a sort of internal electrodes, output voltage of power supply, air flow rate and discharge power. Air has been used as the supplied gas of the ozonizer. In this paper, when disuse fluorescent lamp was used as an internal electrode. Air flow rate was varied from 2[l/min] to 10[l/min]. The maximum ozone concentration and yield were 3495[ppm] and 23.4[g/kWh] respectively at 2[l/min] air flow rate and 35.2[W] input power. Illumination was appeared as 5[lx] within 15[cm] from external electrode. When fluorescent discharge type ozonizer was used, air flow rate was also varied from 2[l/min] to 10[l/min]. At this moment, the maximum ozone concentration and yield were 2824[ppm] and 21.7[g/kWh] respectively at 2[l/min] air flow rate and 30.5[W] input power. Illumination was also appeared as 5[lx] within 15[cm] from external electrode like used fluorescent lamp.
CrN 박막처리된 Ti-6Al-4V 합금의 기계적 성질과 피로특성
박용권,백창현,위명용,Park, Yong-Gwon,Baeg, Chang-Hyung,Wey, Myeong-Yong 한국재료학회 2002 한국재료학회지 Vol.12 No.8
CrN film coated by AIP method, improved the mechanical properties (Hardness, Roughness, wear and fatigue) of Ti-6Al-4V alloy. The properties were studied using GXRD, XPS, Hardness, Roughness, wear and fatigue testers. CrN thin film thickness was about 7.5$\mu\textrm{m}$ and grew with (111) orientation. Hardness of CrN thin film was very high (Hv 1390) and roughness of the surface layer was greatly improved (Ra=0.063$\mu\textrm{m}$) compared with matrix alloy (Ra=0.321$\mu\textrm{m}$). Such changes of hardness and roughness could be contributed to improving the wear resistance and fatigue life. Striation like pattern with dimples and voids, a typical fatigue fracture mode, was observed throughout the specimen.
플라즈마 침탄과 CrN 코팅된 Ti-6Al-4V 합금의 미세구조 및 기계적 특성
박용권,위명용 대한금속재료학회 2003 대한금속·재료학회지 Vol.41 No.12
In order to improve the low hardness and low wear resistance of Ti-6Al-4V alloy, plasma carburization treatment and CrN film coating was carried out. Effects of the plasma carburization and CrN coating were analyzed and compared with the non-treated alloy by microstructural observation, structural characterization and mechanical property test. The plasma carburization treated alloy formed a carburized layer of about 150 mm in depth from the surface, where a fine and hard particles of TiC and V₄C₃ were evenly homogeneously dispersed through the layer. CrN thin film thickness was about 7.5 mm and grew with (111) orientation. Hardness value of about Hv 402 in the matrix was improved as Hv 1,600, 1,390 by plasma carburization, CrN thin film, respectively. Roughness test is an important method to evaluate the surface treatment effect on the wear resistance. The optimum surface roughness of about 0.063 mm could be obtained by CrN film coated, while, about 0.321 mm and 0.211 ㎛ in the matrix and plasma carburization specimens, respectively.
Community Care 로서의 재가복지서비스의 성격 및 발전방향에 관한 연구
박용권 한국사회복지연구회(서울대학교 사회복지연구소) 1992 사회복지연구 Vol.4 No.1
본 연구는 영국을 중심으로 한 지역사회보호 논의를 중심으로 도출되는 이슈들을 검토하여, 우리나라의 재가복지서비스의 특성을 도출하고 그 발전방향을 제시하기 위한 시사점을 찾고자 하는 데 그 목적을 둔다. 따라서 첫째, 영국을 비롯한 서구 복지국가에서 논의되는 지역사회보호란 무엇이며, 이와 관련하여 어떠한 이슈들이 제기되었는가? 둘째 이와 더불어 우리나라의 재가복지서비스의 전개과정에서 나타나는 특징들은 어떠하며 지역사회보호와의 관계는 어떠한가를 살펴본다. 영국의 지역사회보호 정책에서 보여지는 문제들로는 첫째, 지역사회보호 정책의 명확한 개념규정과 정책적 일관성의 결여, 둘째, 사적부문의 강조, 세째, 사회적 서비스의 잔여화, 네째, 지역사회의 보호부담의 문제 등을 중심으로 제기되고 있다. 우리나라의 재가복지서비스는 이른바 지역사회보호 정책의 일부로 위치 지울 수 있으며 그 서비스의 효과성에 관한 평가연구는 아직 기대하기 어려우나 앞의 지역사회보호가 안고 있는 문제들이 재가복지서비스에서도 잠재적으로 제기될 수 있을 것으로 보여진다.
朴庸權,金剛山 圓光大學校 韓醫學硏究所 1997 원광한의학 Vol.7 No.1
백반증(白斑症, Vitiligo)은 특발성 자가면역성에 의한 大小 各種의 局限된 범위의 피부멜라닌세포가 파괴된 상태로서, 색소가 脫失된 반(班)과 이를 둘어썬 과도색소침착이 보이며, 때로는 천천히 확대되기도 하는 질환이다. 백반증은 서양의학적인 용어이며, 한의학에서는 백전풍, 白駁風, 斑駁, 汗斑, 역양, 백전등으로, 일반인들은 백납이라 불리워지고 있다. 이에 본 연구에서는 古代에서 現代에 이르는 歷代 韓醫學書籍을 통하여 白斑症 및 白斑症 범주질환을 原因, 症狀, 治法, 治方으로 분류하고 정리한 결과 다음과 같은 결론을 얻었다. 1. 백반증은 一名 백전풍, 白駁風, 斑白, 汗斑, 역양, 白駁, 백납 등의 여러명칭으로 문헌에 기재되어 있었다. 2. 백반증의 原因은 風寒濕 등의 外因이나 七情內傷, 肺有壅熱 등의 內因들이 氣血不和를 일으켜 발생한다고 하였다. 3. 백반증의 증상은 面, 項部 등에서 주로 호발하며 白色斑點이 나타나고 疼痛이나 ??양감은 없었다. 4. 백반증의 治法과 治方은 內服藥이나 혹은 單用으로 外治法을 사용하는데 治方으로 浮萍丸, 蒼耳膏 등을 투여하거나 硫黃, 密陀僧 등의 약물을 外用으로 활용하고 있었다. In this study on Vitiligo, arranging seventeen kinds of separate volumes and papers published on Oriental medicine through the period from ancient to todays, I could get the result as folliws. 1. Vitiligo was writed several names such as begjunpung(백전풍), begbackpung(白駁風), banback(斑駁), hanban(汗斑), yuckyang(역양), begjun(반전) on literatures of oriental medicine. 2. The cause of Vitiligo is due to derangemint of Qui(氣) and Hul(血) caused exogeneous pathogenic factor such as Wind(風), Cold(寒) and Dampness(濕) or enogeneous pathogenic factor such as heat symptoms of the lung(肺有壅熱). 3. The symptom of Vitiligo may appear white-spot on face, neck area and have no pain, no itching sense. 4. The care of Vitiligo is classified as oral medication and external theraphy, and used the prescription- bupyunghwan(浮萍丸), changiego(蒼耳膏) or single drug-youhwang (硫黃), miltasueng(密陀僧).