http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3D 프린팅으로 제작된 AlCrFeNi 고엔트로피 합금의 분말 입도에 따른 특성 분석
최종우,박혜진,강결찬,정민섭,오기태,홍성환,김현길,김기범 한국분말재료학회 2022 한국분말재료학회지 (KPMI) Vol.29 No.1
Conventionally, metal materials are produced by subtractive manufacturing followed by melting. However, there has been an increasing interest in additive manufacturing, especially metal 3D printing technology, which is relatively inexpensive because of the absence of complicated processing steps. In this study, we focus on the effect of varying powder size on the synthesis quality, and suggest optimum process conditions for the preparation of AlCrFeNi high-entropy alloy powder. The SEM image of the as-fabricated specimens show countless, fine, as-synthesized powders. Furthermore, we have examined the phase and microstructure before and after 3D printing, and found that there are no noticeable changes in the phase or microstructure. However, it was determined that the larger the powder size, the better the Vickers hardness of the material. This study sheds light on the optimization of process conditions in the metal 3D printing field.
李奎承,趙丁禮,崔鍾佑 忠南大學校 環境問題硏究所 1992 環境硏究 Vol.10 No.-
금강상류 용담댐 예정지구내의 금강본류와 지천을 대상으로 하여 7 개소를 선정하여 1992년 5월 30일과 11월 29-30 일의 2회에 걸쳐 현장에서 채취하여 수질을 조사하였으며, 중요한 결과는 다음과 같다. 1. pH는 대체로 수질기준에 적합하였으나, 1차 채수시 금강본류 3개지점에서 이끼 그리고 진안천 하류에는 수초가 왕성하게 자라고 있음을 확인하였다. 2. BOD의 경우 1차시료에서는 금강본류가 유입천 보다 낮았고, 2차시료에서는 본류의 BOd가 상승하는 경향을 보였으며, 지안천하류(L-6)가 1, 2차 시료 모두 가장 높은 함량을 나타냈다. 3. 생활하수와 관련있는 Na+와 Cl-의 함량은 진안천 하류(L-6)에서 가장 높았으며, NH4-N와 NO3-N도 같은 경향이었으므로 진안읍이 금강상류에서 오염원으로 문제가 되고 있음을 알수 있었다. 4. 용담댐 예정지역의 수질은 비교적 양호하였으나, 진안읍의 생활하수와 유역 농경지 토양에서 유입되는 비료성분이 주오염원으로 생각되며, 특히 금강최상류의 죽도유원지는 하절기 수질오염으로 크게 문제시 될 것으로 본다.
알칼리 처리된 제지슬러지의 메탄발효에 미치는 몇몇 첨가제의 효과
최종우,이규승,박승희 충남대학교 농업과학연구소 1995 농업과학연구 Vol.22 No.2
In order to elevate the efficiency of methane fermentation using the paper mill sludge, this experiment was conducted at two temperature conditions(35℃ and 60℃), and overlooked the addition effects of ethyl acetate as a substrate, nickel as a constituent of F_430, and sulfur as a cell growth factor and reductant. The cellulose of paper mill sludge was degraded to lower molecular materials by heating at 60℃ and NaOH treatment. Methane forming rates were 4.8% from NaOH-treated paper mill sludge added with ethyl acetate, 16.5% with sodium sulfide, 19.8% with nickel trioxide, 31.9% with mixture, and 9.6% with control at 60℃, but 0.21% with ethyl acetate, 2.14% with nickel acetate, 3.02% with nickel sulfate, 3.34% with nickel trioxide and 0.62% with control at 35℃. Therefore, methane yield was increased by approximately 10-fold at 60℃ than 35℃, and fermentation liquid added with mixture(nickel trioxide+ethyl acetate+sodium sulfide) at 60℃ showed the medium pH(7.0), higher COD value and lower nitrogen content.