젊은 성인에서 흡연에 의한 상완동맥 내피기능의 부전에 관한 연구

이상철,권영주,방덕원,이선해,이보영,김지욱,김영훈,온영근,현민수,김성구 순천향의학연구소 2002 Journal of Soonchunhyang Medical Science Vol.8 No.1

Background and Objectives : Cigarette smoking is a major factor and the most modifiable risk factor for atherosclerosis. Endothelial dysfunction is an early event in atherosclerosis, before the structural change of the systemic arteries. We hypothesized that endothelial dysfunction might be present in the systemic arteries of young adult smokers and that this might be dose-dependent phenomenon. Therefore, we try to certify that smoking is associated with endothelial dysfunction in healthy young adults without other risk factor of atherosclerosis. Subjects and Methods : we studied noninvasively 29 subjects aged 3 to 4 decades without other risk factor of atherosclerosis, they were composed of the two groups, current smokers(n=15) and nonsmokers(n=14). Smoking history varied from 3 to 20 pack years. Using high-resolution ultrasound, vessel diameter and mean flow rate were measured at rest, during reactive hyperemia(with flow-mediated endothelium-dependent dilation), and after sublingual nitroglycerin(NG-induced endothelium-independent vasodilation). Result : Flow mediated endothelium dependent dilation was observed in the control subjects (9.4±3.44%) but was impaired in the smokers(5.8±2.51%)(p=0.004). NG-induced endothelium independent dilation is no difference in all subjects. Conclusion : Cigarette smoking is associated with endothelial dysfunction in healthy young adults.

미세 전기기계 시스템용 알루미늄 박막의 탄성계수 및 항복강도 평가

주영창,손동일,관동일 대한금속재료학회(대한금속학회) 2001 대한금속·재료학회지 Vol.39 No.3

Nowadays, the aluminum films have wide application in micromechanical devices such as micro sensors and actuators, so that their mechanical properties come to be very important for reliability evaluation. However, there is no standardized method to evaluate the mechanical properties of material used in MEMS (micraelectromechanical system) device since the measured mechanical properties are influenced by many factors such as surface condition, friction force, etc. Hence, we intended to evaluate the mechanical properties of thin film in our study, which is important in mechanical operation. Because MEMS devices are usually operating in elastic range, the Young's modules and yield strength were evaluated by using microcantilever beam technique. First, Al cantilever beams were fabricated using the silicon bulk micromachining technology to have various film thickness. And then, the load-displacement curve was obtained by nanoindentation method. The linear relation in elastic range was utilized in deriving the Young's modulus of Al film, which gives us reproducible result regardless of film thickness. In high load range, the deviation from the linear relation was detected, so that the yield strength of Al film could be evaluated. It is found that the yield strength increases with decreasing film thickness. By applying the misfit dislocation theory and the Hall-Petch relation, the theoretical estimation could predict well the trend of yield strength.

만선신부전 환자에서 관상동맥조영술 소견에 관한 연구

한대희,김성구,박상호,김성한,조원영,방덕원,조윤행,정의룡,은영근,권영구 순천향의학연구소 2003 Journal of Soonchunhyang Medical Science Vol.9 No.1

Background : Patients with chronic renal fialure have a substantially elevated risk of death from cardiovascular diseases than do the general population. the patients with chronic renal failure are at significantly increased freqeuncy of hypertension, hyperlipidemia, and diabetes mellitus which are known to the risk factors of the coronary artery diseases, and the prevalence of the coronary artery diseases in chronic renal failure patients is highly associated with the hemodynamic disorder and metabolic abnormalities. therefore we expected that the coronary angiographic findings in patients with chronic renal failure should be different from the general population (control groups) and investigated the risk factors contributing to coronary artery diseases. Method : we have retrospectively compared the coronary angiographic findings of 44 patients with chronic renal failure on hemodialysis with that of 88 patients in the general population and investigated the factors contributing to the development and acceleration of coronary artery diseases in patients with chronic renal failure Result : Hypertension and diabetes mellitus which is risk factors for coronary artery disease is significantly increased in patients with chronic renal failure, in coronary angiographic finding the severity of the lesion is worse. the incidence of PCI or CABG of patients with chronic renal failure is more than that of control group but statistically no difference between patients with chronic renal failure and control group. the sex, the duration of disease, the duration of dialysis, serum creatinine in patients with chronic renal failure have no correlation to the prevalence of coronary artery disease and severity of lesion. hyperglycemic patients with chronic renal failure have high incidence of coronary artery disease and are worse in the severity of lesion Conclusions : There is significantly increased the pevalence and severity of involving multiple coronary artery diseses in hyperglycemic patients with CRF.

3차원 금형절삭에 있어서 上下方向 切削特性 硏究

권영균,이동주 충남대학교 산업기술연구소 2000 산업기술연구논문집 Vol.15 No.2

In our study, the experiment tried to find the optimum cutting conditions and method by observing the cutting force working at ball end-mill varying axial depth and radial depth for upward cutting and downward cutting along the decline. As a result of the experiment, the cutting was more unstable in downward cutting than in upward cutting and also in the case of axial depth than in radial depth, which resulted from the fact that the cases of downward cutting and of radial depth had a relatively wider contact surface than that of upward cutting and of axial depth and approached the edge at extreme point of a tool more closely rather than a side blade, and the cutting force had a tendency to be reduced as the inclined angle increased.

급성 심근경색증 및 정상적인 관상동맥 조영술을 보인 유전성 S 단백 결핍증 1례

권영주 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Protein S is a vitamin K-dependent plasma protein that inhibits the process of blood coagulation via activation of protein C, another vitamin K-dependent plasma protein. Protein S deficiency may be associated with thrombotic events, including venous and arterial thrombosis. We report a case of acute myocardial infarction and normal coronary angiogram with hereditary protein S deficiency.

모니터용 회로기판의내구성 향상을 위한 열응력 해석

權寧住,김진안 홍익대학교 산업기술연구소 2001 産業技術 Vol.11 No.-

In this paper, the thermal stress analysis of the PCB(printed Circuit Board) of a monitor is carried out for various array types of chips on the printed circuit board and two PCB structural models. The electronic chip on the printed circuit board usually emits heat and this heat generates the thermal stress around the chip. The thermal load due to the heat generation of chips on the printed circuit board may cause the malfunction of the electronic equipment such as monitor, computer etc.. Hence, the PCB should be designed to withstand this thermal load. The thermal stress analysis for the durability of the PCB is done using the finite element analysis code, NISA.

유물을 통해 본 백제 복식의 유형과 특성

권영숙,이주영 한국의류산업학회 2004 한국의류산업학회지 Vol.6 No.5

The purpose of this study is to investigate the historical background and basic composition of costume of the Baekje period. Main official hats of Baekje include the transformed hat, jougwan and daeryun-style ipsikgwan. Daeryun-style ipsikgwan employed chowha shape in most cases, symbolizing good auspice under the harmony of the male and female principles. Main types of costume of the Baekje period are po, yu, go and sang. The king, governmental officials and the common people all put on po of jikryeong gyoim style. Yu' is classified into two styles, chaksu with the narrow sleeve and daesu with the broad one. 'Go' has two styles, gunggo and gwango. The former is narrow in the breadth of the trouser and the latter wide. 'Sang' is classified into various style according to whether it contains stripes of many colors, thin wrinkles or thick wrinkles. For the decoration of official hat used in the period of the Three Kingdoms, Baekje employed chowha in shape, Kokuryo, chowha and joik and Shilla, joik. In Baekje, rhythmic patterns of flame were applied to official hats, presenting brilliance. In Shilla, shaking geumyeongrak was used for official hats to show movement. In Kokuryo, such hats used flapping feathers, symbolizing dynamic power. Most necklaces and bracelets of the Baekje period were simple and plain.

韓國 地方政府의 影響力에 관한 硏究 : 國策事業을 中心으로 Focused on National Project

權寧周 서울市立大學校 1997 論文集 Vol.31 No.-

Regarding the relationship between the central and local government in Korea, it's been often argued the former is much superior. The central government is said to be superior because it enjoys a large amount of administrative resources including legal and financial ones. Furthermore, it's been also purported that local governments depend on the central government during the policy making process. Does local government really depends on the central government in their policy making process? To explore this question, the influence of local government is examined with the case of national projects. This paper tests the hypothesis which is drown from literature review, the influence of local government in korea is stronger than as ever suggested.

RecurDyn을 이용한 Mold Ejector Sleeve Pin의 와이어 컷 방전가공 메카니즘 시뮬레이션

權寧住 弘益大學校 産業技術硏究所 2007 産業技術 Vol.17 No.-

This paper presents a computer aided simulation of the wire-cut EDM machining of the mold ejector sleeve pin which is used in the ejecting system of the die casting work. For this the ejecting system in the die casting work is studied. Also the principles and characteristics of the wire-cut EDM are studied in detail. The computer simulation is carried using the CAE tool, RecurDyn. The simulation result shows that the contact force between the wire of the wire-cut EDM machine and the inner surface of the mold ejector sleeve pin is very small.

朝鮮 民畵의 美的 特質

권영주 국제문화학회 2005 Vol. No.