Flavobacterium meningosepticum에 의한 균혈증 1예

장성원,유진홍,진승원,김선우,김연식,박순민,이대훈,최민호,최주연,신완식,강문원,강지민 대한화학요법학회 1997 대한화학요법학회지 Vol.15 No.1

1996년 6월 카톨릭대학교 부천성가병원에 뇌경색으로 입원했던 61세 남자 환자의 혈액에서 Flavobacterium meningosepticum을 분리하였다. 환자는 폐렴을 동반한 패혈증의 예로 ceftriaxone과 metronidazole을 투여하였으나 입원 48시간만에 사망하였다. Flabovacterium meningosepticum is a rae cause of nosocomial infection which shows multi-drug resistance. It mainly invades patients with impaired immunity. Recently, we experienced a case of F. meningosepticum bacteremia in a patient with chronic debilitated state owing to stroke. The clinical progress was so rapid that he died within 48 hours. Blood culture revealed F. meningosepticum which showed characteristic yellow colony in blood agar plate.

열형광 CaSO₄ : Dy 소자의 최적 제조조건에 관한 연구

양정선,장시영,김장렬,김두영,남영미,박재우 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.1

An experimental investigation has been performed to determine optimal conditions for preparing the thermoluminescent CaSO_(4):Dy pellets which have been widely used as personal radiation dosimeter material. Our investigation has shown that an optimal weight concentration of the dopant Dy in the bulk CaS0_(4):Dy is 0.1 mol%. and an optimal temperature of adding Dy in the preparing process is 320℃. An optimal time and temperature for sintering the CaSO_(4):Dy crystal produced from the chemical process are found to be 2 hours and 800℃. respectively. The maximum thermoluminescent sensitivity was observed when the CaSO_(4):Dy crystal was pulverized to grain sizes of 63 - 200 m in diameter before being fabricated into pellets. The commercial Teflon was selected as an adhesive for the fabrication of the CaSO_(4):Dy pellets with an optimal mixing ratio of the Teflon and CaSO_(4):Dy being 70 to 30 in weight.

서울시 교직원 당뇨병의 역학적 특성 및 관련위험요인분석

이희우,김종희,장철환,신선미 韓國學校保健學會 2004 韓國學校保健學會誌 Vol.17 No.1

Purpose : To describe the prevalence, epidemiological characteristics, and related factors of diabetes mellitus in school personnel. Method : 5,384 school personnel (2,638 males 2,746 females) received physical examinations at the Seoul School Health Center in Z 2. Using the American Diabetes Association criteria, and fasting blood sugar(FBS) was classified as normal at 110>=FBS, borderline 111-125, and the diabetes group 126<=FBS. Related factors of each group were evaluated by gender. Results : In the diabetes group, there were 4.74% males and 0.8% females, and the borderline group was 6.37% males and 2.22% females. The older age group gad a higher distribution in both males and females in the diabetes group. In the diabetes group, the mean and abnormal rate of BMI, systolic hypertension, diastolic hypertension, total cholesterol, GOT, GPT, and GTP were higher than in the normal group. In life style factor, the diabetes group gad a higher distribution of meat eating and smoking more than 20 years than the normal group. The effect of FBS on BMI, BP(blood pressure), total cholesterol, GOT, GPT, and GTP were investigated after controlling for confounding variables. In the borderline and diabetes group, the mean of BMI, BP, total cholesterol, GOT, GFT, and GTP was higher in dose-response effect. In the logistic multiple regression, the related factors of the diabetes group were hypertension and abnormal GTP in males, and abnormal total cholesterol and GTP in females. In the borderline group, the related factors were meat eating, hypertension, and high GOT in males and the older age group, and hypertension, total cholesterol, and abnormal GTP in females. Conclusions : It is possible to manage all related factors of diabetes mellitus except for age. An appropriate program for health promotion is necessary.

CBD으로 제작한 In:Cd_(1-x)Zn_(x)S/CdTe 태양전지의 전기적 특성에 관한 연구

심재선,송우창,방영근,김남석,임창민,장현 三陟大學校 2006 論文集 Vol.39 No.-

CdS thin films have been widely used a window material in heterojunction solar cells. In solar cell systems, where CdS thin films have been proved to be useful, partial substitution of Zn for Cd increases the optical window of the hetero-junction and also the diffusion potential. In this thesis, effects of the thickness of indium films and the annealing temperature on structural, optical and electrical properties of chemically deposited CdZnS films for the efficiency of the Cd_(1-x)Zn_(x)S/CdTe solar cells were investigated. Cd_(1-x)Zn_(x)S films were grown by chemical bath deposition (CBD), which is a very attractive method for low-cost and large-area solar cells. The open circuit voltage of Cd_(1-x)Zn_(x)S/CdTe solar cells increased due to reduced electron affinity difference between Cd_(1-x)Zn_(x)S and CdTe films. However, the conversion efficiency of Cd_(1-x)Zn_(x)S/CdTe solar cell decreased because of the higher series resistance(R_(s)) than CdS/CdTe solar cell. The series resistance and conversion efficiency of Cd_(1-x)Zn_(x)S/CdTe solar cell were improved by using indium-doped Cd_(1-x)Zn_(x)S films as window layer. Cd_(1-x)Zn_(x)S/CdTe solar cells fabricated with optimal conditions exhibited V_(oc)=630mV, J_(sc)=38.89mA/㎠ , FF=0.53, and η=13.2%

史料紹介 : 『御尋朝鮮覺書』(小田四郞兵衛著) 異本 『朝鮮風俗記』

하우봉,홍성덕,장순순,小幡倫裕 전북대사학회 1997 전북사학 Vol.19ㆍ20 No.-

열형광 CaSO₄:Dy 소자의 최적 제조조건에 관한 연구

김장렬,남영미,장시영,김두영,양정선,박재우 제주대학교 산업기술연구소 2000 尖端技術硏究所論文集 Vol.11 No.1

An experimental investigation has been performed to determine optimal conditions for preparing the thermoluminescent CaSO4:Dy pellets which have been widely used as personal radiation dosimeter material. Our investigation has shown that an optimal weight concentration of the dopant Dy in the bulk CaSO4:Dy is 0.1 mol%, and an optimal temperature of adding Dy in the preparing process is 320 ℃. An optimal time and temperature for sintering the CaSO4:Dy crystal produced from the chemical process are found to be 2 hours and 800 ℃, respectively. The maximum thermoluminescent sensitivity was observed when the CaSO4:Dy crystal was pulverized to grain sizes of 63 - 200 ㎛ in diameter before being fabricated into pellets. The commercial Teflon was selected as an adhesive for the fabrication of the CaSO4:Dy pellets with an optimal mixing ratio of the Teflon and CaSO4:Dy being 70 to 30 in weight.

팥 신장기 과습처리에 의한 생육특성 및 단백질 발현

정해룡, 유장환, 윤성현, 권수정, 우선희 충북대학교 농업과학기술연구소 2022 農業科學硏究 Vol.38 No.2

Adzuki bean is sensitive to waterlogging stress. The overall study on the waterlogging stress is limited comparing to the study on the drought and any environmental stress. Therefore, the present study was conducted to investigate the changes in growth characteristics and the expression patterns of proteins at the 5-leaf stage periods of adzuki bean. The domestic cultivar, Arari (Miryang No. 8) was used to test the waterlogging stress. In the waterlogging treatment for 3 days, the plant height showed slightly decrease in the treatment at 3 days of waterlogging, but root fresh weight showed significantly changes at 3 days of the waterlogging treatment. Chlorophyll contents showed also significantly different at 3 days of waterlogging treatment compared to control the plants. The waterlogging stress gradually influenced the growth differences between the control and the treatment respectively. More than 350 pro- tein spots were identified on 2-D gels using an image analysis. Moreover, a total of 28 proteins were analyzed using LTQ-FT-ICR MS. Among these 28 proteins, a total of 18 proteins were up-regulated, and 10 proteins were down-regulated under waterlogging treatment. According to biological process, the most of the proteins were found to be involved in carbohydrate metabolism. Regarding the subcellular local- ization, most of the proteins were localized into chloroplasts in 5-leaf stage.

오스템퍼링한 구상흑연주철(ADI)의 드릴 가공시 경도 및 현미경조직변화에 관한 연구

조규재,장우양,심재기,홍성오,김선진 한국공작기계학회 1999 한국생산제조학회지 Vol.8 No.1

This paper was carried out to know the influence of advanced austempered ductile cast iron (ADI) on the tool life and mechanical properties of drilling machinability. For manufactured method of ADI, the spheroidal graphite cast iron were austenized at 900℃ for 1 hour and then austempered for 2 hour at 370℃ in the salt bath. And interrelationship has been investigated between tool life and mechanical characteristics of specimen material on drilling condition when the ordinary and step-feed drilling are carried out to drill holes of specimens. Tensile strength and hardness of ADI decrease and elongation of ADI increases with the increase austempered temperature. It is known that about 2 times of tool life in the case of step-feed decreases compared with ordinary feed due to the high hardness of ADI and hardness ascribed to the fact that retained austenite beame to martensite state due to cutting heat in drilling. Under the constant feed rate 0.1㎜/rev relation between hardness and length of end tip after drilling can be formularized to Hv=788.46L^-0.096 for the cutting speed 6.1m/min.

한국의 정신분열병 외래 환자의 직ㆍ간접비용

박종익,송선희,서동우,장현종,이종국,장안기,김윤,이철,홍진표 大韓神經精神醫學會 2000 신경정신의학 Vol.39 No.3

연구목적 : 정신분열병 외래 환자의 직접 비용과 간접 비용을 추산해 보고, 의료 자원의 적절한 운용과 효과적인 배분을 위한 보건 정책의 기초자료로 사용하고자 한다. 방 법 : 정신분열병 진단을 받은 289명의 환자를 대상으로 6개월간 외래를 방문하면서 사용한 의료비와 시간을 조사하여 직접 비용을 추산하였고, 이 기간 동안 소실된 생산성을 간접 비용으로 환산하였다. 만성질환인 관상동맥 질환을 앓고 있는 환자 82명을 대조군으로 하여 비용을 비교하였다. 결 과 : 정신분열병 환자의 실업률은 72.1%였으며, 직장을 가지고 있는 경우에도 단순노무직의 비율이 64.5%로 매우 높았다. 정신분열병의 직접 비용은 평균 81.5만원으로 관상동맥 질환의 평균 71.5 만원보다 상대적으로 많이 추산되었으나 유의하지는 않았다. 간접 비용은 평균 645.6만원, 258.9 만원으로 정신분열병군이 2.5배 정도 높았다. 결 론 : 정신분열병은 다른 만성질환에 비하여 상대적으로 매우 고비용이 요구되는 질환이며, 보다 체계적인 비용의 추산을 통하여 양질의 정신 보건 서비스를 제공할 수 있는 토대가 마련되어야 할 것이다. Objectives : We have aimed to estimate the direct and indirect costs of treating out-patients with schizophrenia in Korea, to use this fundamental data for the effective management and proper distribution of the medical resource. Method : To estimate the direct cost, we surveyed the medical cost and time of two hundred and eighty-nine out-patients with schizophrenia for six months. And the lost productivity as many months was converted into the indirect cost. Those of eighty-two coronary heart disease patients were also estimated as a comparison group. Results : An unemployement rate of schizophrenic patients was 72.1 percent. Moreover the ratio of the laborer in the sample was, even if employed, 64.5 percent. The mean direct cost of schizophrenic patients was, about 815,000 won, higher than that of coronary heart disease, 715,000 won however it was not statistically significant. The former was also estimated 2.5 times more than the latter for the indirect cost, or 6,456,000 won versus 2,589,000 won. Conclusion : Schizophrenia is a relatively costly illness compared to other chronic illness, so the systematic estimation of the cost is necessary to provide mental health service of high quality.

인공이식재 MEDPOR 를 이용한 중안모증가술(PARANASAL AUGMENTATION)과 측모의 변화

정상훈,최장우,김명래,이창국,김선종 大韓顎顔面成形再建外科學會 1996 Maxillofacial Plastic Reconstructive Surgery Vol.18 No.2

With the increasing esthetic requirement in orthognathic surgeries, midfacial corrective surgeries were developed to improve the paranasal depression. Augmentation with autogenous bones has long been the standard in facial reconstruction, however limited graft availability, donor site morbidity, and difficulties in 3-dimensional shaping were led to limited use. Porous high density polyethylene(Medpor) was introduced in the 1970s as an alloplastic implants. It can be used in various size and shapes, and shortend operation time. The purpose of this study is to determine, by means of cephalometrics, the degree of long term stability and gaining of the overlying soft tissue thickness. The results were as followings : 1. There was no evidence of foreign body reaction, infection, and tissue necrosis. 2. Medpor implants had an advantage of clinical use ; easy to contour and adapt to obtain a precise 3-dimensional construction. 3. Cephalometric study of 16 cases of paranasal augmentation revealed an overall increase of soft tissue thickness of approximately 82.1% in 6-months following. 4. The successful results could be obtained under the aseptic handling.