후두 미세 수술전후의 음성기능분석

김영모,조정일,김철호,김영진,하현령 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.9

소아에서 나타난 비구개관낭의 치험례

모정희,정현구,조태식,김효석,박성규,이난영 조선대학교 구강생물학연구소 2002 口腔生物學硏究 Vol.26 No.2

The nasopalatine duct cyst is the most common non-odontogenic cyst in the oral area and is thought to be originated from the epithelial remnants of the nasopalatine duct. The nasopalatine duct cyst have been mentioned to be an overall incidence of 1.7-11.9% of all jaw cyst. More males than females are affected by that. It could occur all around the age, and especially in their 40th and 60th it happens the most and in childhood it is very rare. Proper treatment for nasopalatine duct cyst is enucleation. In the case of very large cysts, it is likely to be a risk of naso-oral or antral-oral fistulas or of devitalization of teeth, marsupialization is indicated. The purpose of case report is that a nasopalatine duct cyst in is very rare in childhood. A 9-year-old boy was referred to the chosun university pedodontics clinic that this child who has anterior palatal swelling is in routine check. The size of the cyst was so big that the marsupialization was committed and obturator was put. This patient is on the continuous observation. we treated the nasopalatine duct cyst with obturator.

중합가시광 파장대에 따른 심미성 수복재의 미세경도 변화

김현철,조경모,신동훈 대한치과보존학회 2001 Restorative Dentistry & Endodontics Vol.26 No.2

There are several factors affecting the effectiveness of polymerization of the esthetic restorative materials. Among those factors, the initiator, camphoroquinone has the unique characteristic, of which the light sensitivity is very dependent on the wavelengh of blue light. Camphoroquinone shows the most light absorption ability in the wavelengh range of 470nm. So most of clinically used light curing systems adopt this phenomenon as their polymerization mechanism. The most popular way of light curing system is standard 40-second curing. But the problem of standard curing technique shows the rapid increase of resin viscosity followed by the acceleration of polymerization and the limited resin flow, resulted in reduction of the physical property of restoration by retained stress. The object of this study was to verify the effects of narrow-banded wavelengh on the microhardness of the esthetic restorative materials, a composite resin and a composer, using filters which have peak wave-lengh of 430nm,450nm,470nm, respectively. The results were as follows : 1.All the experimental groups showed lower hardness value than the control group. 2.In DyractAP, the hardness value by wavelengh showed the same changing pattern on both upper and lower surfaces. 3.In DenFil, the hardness value by wavelengh showed different changing pattern on upper and lower surfaces. 4.The hardness ratio showed similar pattern to the hardness variation of lower surface, but there was no significant difference between measurement in 10 minutes and 3 days later, besides the increase of hardness value.

ProFile을 이용한 근관형성 시 anticurvature filing 방법의 영향

송현지,장주혜,조경모,김진우 大韓齒科保存學會 2005 Restorative Dentistry & Endodontics Vol.30 No.4

본 연구에서는 ProFile로 근관형성 시 anticurvature filing 방법의 영향을 평가하고자 하였다. 변형된 Bramante 법을 이용해 36개의 레진 블록을 치근단으로부터 8 mm부위와 근관의 최대 만곡 부위에서 절단한 후 재조립하였다. 근관형성의 동작에 따라 anticurvature Hling motion, oircurnferential filing motion, straight up-and-down motion의 3가지 실험군으로 분류한 다음 ProFile로 근관을 형성하였으며, 술 전·후의 단면을 stereomicroscope로 촬영, 저장하고 중첩하여 근관 단면의 변화와 근관의 중심 이동률을 비교 평가하였다. 모든 위치에서 단면적 변화량, 만곡 내측으로의 형성량과 중심 이동률은 세 군 간에 유의한 차이가 없었으며, 만곡 외측으로의 형성량은 치근단으로부터 8 mm 부위에서 anticurvature filing motion, oircurnferential filing motion,straight up-and-down motion의 순으로 많았으나, 근관의 최대 만곡 부위에서는 차이가 없었다. 이상의 결과에서 만곡 근관의 위험 부위에서 ProFile로 근관형성 시 anticurvature filing motion의 영향은 다른 motion과 비교해 볼 때 유의할 만한 차이가 없는 것으로 생각된다. This study investigated the effect of anticurvature filing method on preparation of the curved root canal using ProFile. Thirty six resin blocks were divided equally into three groups by instrumentation motions: anticurvature filing motion, circumferential filing motion and straight up-and-down motion. Each resin block was sectioned at 8 mm level from the apex and at the greatest curvature of the canal and reassembled in metal mold by a modified Bramante technique. All groups were instrumented with the ProFile system. At each levels, image of sectioned surface were taken using CCD camera under a stereomicroscope at ×40 magnification and stored. Distances of transportation at the inner and outer area of curvature and the centering ratio were determined and compared by statistical analysis, along with the assessment of the increase of root canal cross-sectional area. The results were as follows; 1. In all groups, there was no statistical difference in the mean increase of root canal cross-sectional area, the centering ratio, and the mean distances of transportation at the inner area of curvature at each level. 2. At 8 mm level from the apex, the mean distances of transportation at the outer area of curvature decreases in following order anticurvature filing motion, circumferential filing motion, straight up-and-down motion but, no significant difference at the greatest curvature of the canal among three groups. Effect of anticurvature filing motion using ProFile does not seem to be different from other instrumentation motions at the inner area of curvature in curved root canal.[J Kor Acad Cons Dent 30(4):327-334,2005]

리본형태의 근관에서의 열연화 근관 충전법의 비교 : 근관 충전된 gutta-percha의 무게 WEIGHT OF FILLED GUTTA-PERCHA

김현희,조경모,김진우 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.3

The purpose of this study is to evaluate the two warm gutta-percha filling techniques by measuring the weight changes of resin blocks before and after canal filling in ribbon shaped canal. Simulated ribbon shaped root canals in 30 transparent resin blocks were instrumented to #40 using .06 taper Profile. 16 resin blocks were obturated with gutta-percha using cold lateral condensation. Warm lateral condensation using the Endotec Ⅱ was then accomplished on the same 15 blocks. Another 15 resin blocks were obturated using the System B. All canals were obturated without sealer. The resin blocks were weighed after canal preparation and after each subsequent obturation, and then weight changes of the resin blocks were calculated. The results were as follows. 1. Warm lateral condensation using Endotec Ⅱ and continuous wave of condensation using System B produced a denser obturation of gutta-percha compared with conventional cold lateral condensation (p<0.01). 2. There was no significant difference between warm lateral condensation and continuous wave condensation. In conclusion, the warm gutta-percha condensation techniques like warm lateral condensation and continuous wave condensation can be expected to bring favorable canal obturation results in ribbon shaped canals.

리본 형태의 근관에서 열연화주입법의 근관벽에 대한 적합도에 관한 연구 : ADAPTATION TO CANAL WALLS

황현숙,조경모,김진우 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.4

The aim of this study is to compare the adaptability of thermoplasticized injectable gutta-percha technique to the canal walls in ribbon-shaped canals. Thirty resin models simulated ribbon-shape canals were instrumented to #40 using. 06 taper Profile systems. Three groups of each 10 resin models were obturated by the lateral condensation technique(LC) and the two thermoplasticized injectable gutta-percha technique; Ultrafil Endoset+Obtura Ⅱ(EO) and Ultrafil Firmset(UF), respectively. After resin model were kept at room temperature for 4 days, they were resected horizontally with microtome at 1, 2, 3, 4 and 5mm levels from apex. At each levels, image of resected surface were taken using CCD camera under a stereomicroscope at ×40 magnification and stored. Ratio of the area of gutta-percha was obtained by calculating area of gutta-percha cone to the total area of canal using digitized image-analyzing program. The data were collected then analyzed statistically using One-way ANOVA. The results were as follows. 1. At 1mm levels, there was no statistically significant difference in the mean ratio gutta-percha among the groups. 2. At 2mm level, EO showed the highest mean ratio of gutta-percha (p<0.05) and there was no significant difference between LC and UF. 3. At 3, 4, 5mm levels, EO and UF and had significantly greater mean ratio of gutta-percha than LC(p<0.05) and there was no significant difference between EO and UF. In conclusion, the thermoplasticized injectable gutta-percha techniques demonstrated relatively favorable adaptability to canal walls than lateral condensation technique in ribbon-shaped canals except for 1mm level.

팽이 톱밥 人工栽培時 培地微生物相의 經時的인 密度變化

배태웅,文炳周,辛元敎,宋模烈,李鉉旭,曺東進 東亞大學校生命資源科學大學附設 農業資原硏究所 1996 農業生命資援硏究 Vol.5 No.1

팽이 재배에 있어 가장 큰 문제 중의 하나는 雜菌에 대한 汚染, 특히 細菌에 의한 피해가 극심하므로 作業段階와 栽培過程 전반에 걸쳐 培地徵生物相의 經時的인 密度變化에 따른 雜菌의 培地內 流入時期를 조사하여 汚染菌의 發生消長을 알아보기 위해 現地農家에서 시험해 본 결과 接種후 培養室에서 菌絲培養을 시작한 5일후부터 細菌이 檢出되기 시작하여 菌긁기전까지 약 25일간 0.5∼3.1×10⁴cfu/g의 密度를 보였으나 經時的인 密度增加는 없었고, 菌絲培養이 끝난 뒤 菌긁기직후부터 細菌의 密度는 118.3×10⁴cfu/g으로 급격히 높아졌으며 子實體生育 기간동안에 시간이 경과함에 따라 密度가 현저하게 증가되는 경향을 나타냈다. 이는 培養室 안으로 흐르는 空氣를 통하여 甁內로 細菌이 流入되고 또한 菌긁기 직후 培地表面에 灌注하는 물과 加濕機에서 噴霧되는 물粒子가 細菌의 密度增加에 절대적으로 영향을 미치는 것으로 판단되므로 이때가 細菌性褐斑病菌에 感染되기 가장 용이한 시기로 생각된다. 眞菌은 菌긁기후 子實體生育 기간동안 1.17∼7.87×10⁴/g의 密度로서 菌絲培養 기간동안의 密度보다 다소 높게 檢出되었으나 대체로 經時的인 密度增加는 보이지 않았으며, 放線菌은 거의 검출되지 않거나 菌絲培養 후 5일째부터 다소 검출되기 시작했으나 밀도가 매우 낮았고 經時的으로도 증가되지 않았다. One of the most serious problem on the Enoki mushroom cultivation is the infection by pathogenicitic microorganisns, especially bacterial diseases causing serious economical losses in the mushroom production. It was carried out to find the tendency of the development of mushroom diseases by temporal changes and variation of the densities of media microflora through the cultivation periods and working stages in a mushroom farm. According to the results, several bacteria were detected from the fifth day after the inoculation and incubation of mycelium in the incubation room, and the density of bacterium was 0.5∼3.1×10⁴cfu/g media for 25 days before the inoculum-removing, although there was no increment of the density. Since the inoculum-removing after the spawn run, the density of bacterium was rapidly increased as 118.3×10⁴cfu/g media, and was significantly increased by time during the growth period of fruitbodies. It was hypothesized that it is the most suitable period for the pathogen infection because the bacterium might be introduced by the air in the incubation-room, and the increment of bacterium density might be affected by moisture supplied through watering or humidifier in the growing room after the inoculum-removing. Fungi were detected as the density as 1.17∼7.87×10⁴/g media and the density was slightly higher than that during the incubation period of hyphae, although there was no significant increment. Generally, the density of Actinomycetes was disregardfully low, or Actinomycetes were hardly ever found, although there was found some 5 days after incubation hyphae in few cases.

만성 승모판 패쇄부전증 환자에서의 안지오텐신 전환효소 억제제의 장기 투여 효과

김대희,이명묵,이해영,조현재,박승정,서재빈,서정원,양한모,윤창환,조상호,이준희,김용진,김명아,손대원,오병희,박영배 대한순환기학회 2004 Korean Circulation Journal Vol.34 No.2

Clinical outcomes of acute upper gastrointestinal bleeding according to the risk indicated by Glasgow-Blatchford risk score-computed tomography score in the emergency room

Hyun Ae Lee,Hye Kyung Jung,Tae Oh Kim,Ju-Ran Byeon,Eui-Sun Jeong,Hyun-Ji Cho,Chung Hyun Tae,Chang Mo Moon,Seong Eun Kim,Ki Nam Shim,Sung Ae Jung 대한내과학회 2022 The Korean Journal of Internal Medicine Vol.37 No.6

Background/Aims: Acute upper gastrointestinal (UGI) bleeding is a significant emergency situation with a mortality rate of 2% to 10%. Therefore, initial risk stratification is important for proper management. We aimed to evaluate the role of contrast- enhanced multidetector computed tomography (MDCT) for risk stratification in patients with acute UGI bleeding in the emergency room (ER). Methods: This retrospective study included patients with UGI bleeding in the ER. Glasgow-Blatchford risk score-computed tomography (GBS-CT) was assessed using a combination of GBS and the MDCT scan scoring system. Results: Of the 297 patients with UGI bleeding, 124 (41.8%) underwent abdominal MDCT. Among them, 90.3% were classified as high-risk by GBS, and five patients died (4.0%). Rebleeding occurred in nine patients (7.3%). The high-risk GBS-CT group had significantly higher in-hospital mortality (10.5% in high-risk vs. 1.4% in moderate risk vs. 0% in low-risk, p = 0.049), transfusion amount (p < 0.001), and endoscopic hemostasis (p < 0.001) compared to the moderate- and low-risk groups. Conclusions: Adding MDCT scans to the existing validated prognosis model when predicting the risk of UGI bleeding in patients in the ER plays a significant role in determining in-hospital mortality, transfusions, and the need for endoscopic hemostasis.

Fabrication of SOI FinFET Devices using Arsenic Solid-phase-diffusion

Cho, Won-Ju,Koo, Hyun-Mo,Lee, Woo-Hyun,Koo, Sang-Mo,Chung, Hong-Bay The Korean Institute of Electrical and Electronic 2007 전기전자재료학회논문지 Vol.20 No.5

A simple doping method to fabricate a very thin channel body of the nano-scaled n-type fin field-effect-transistor (FinFET) by arsenic solid-Phase-diffusion (SPD) process is presented. Using the As-doped spin-on-glass films and the rapid thermal annealing for shallow junction, the n-type source-drain extensions with a three-dimensional structure of the FinFET devices were doped. The junction properties of arsenic doped regions were investigated by using the $n^+$-p junction diodes which showed excellent electrical characteristics. The n-type FinFET devices with a gate length of 20-100 nm were fabricated by As-SPD and revealed superior device scalability.