MPLS 망에서 차별화 된 서비스를 제공하기 위한 빠른 Multipoint-to-Point LSP 결정 방식

김성관,조영종,Kim, Seong-Gwan,Jo, Yeong-Jong 대한전자공학회 2002 電子工學會論文誌-TC (Telecommunications) Vol.39 No.5

MPLS(Multiprotocol Label Switching) 망에서 LSP(Lable Switched Path)의 수와 레이블 수를 줄이는 것은 망의 자원 관리 측면에서 매우 중요하며, MTP(Multipoint-to-Point) LSP는 이러한 문제점을 해결할 수 있다. 트래픽 엔지니어링을 고려할 때, MTP LSP는 트래픽 부하의 균형을 통한 망의 가용성과 링크 사용율을 높이는 경로를 선택하여야 한다. 또한 링크 단절시의 재 경로 설정이 요구되므로 빠른 경로 결정 방법이 요구된다. 본 논문은 Diffserv를 지원하는 MPLS 망에서, Diffserv의 PHB(Per Hop Behavior)와 다중경로 MTP LSP간의 매핑을 통한 트래픽 엔지니어링을 제안한다. 제안하는 트래픽 엔지니어링은 서비스 특성에 따라 계층적인 MTP LSP의 다중 경로를 결정한다. Monte-Carlo 방법을 사용한 빠른 트래픽 부하 균형 해를 구함으로써, 망 형태 정보가 빈번히 변하는 대규모 망에서 신속한 재 경로 결정을 할 수 있다. 제안하는 MTP LSP의 경로 결정 방법은 알고리즘의 수행 정도에 따라 최적의 경로 결정에 접근한다. 경로 결정의 시간 복잡도는 O(Cn²logn)으로 기존의 다중 경로 결정 방법과 동일한 시간 복잡도를 가지며, 선형 프로그래밍 접근보다 빠른 수행 시간을 갖는다. 시뮬레이션 결과 제안하는 알고리즘은 망의 형태정보와 요구하는 트래픽 부하 균형에 따라 효과적으로 제어될 수 있음을 보이며, 또한 제안하는 트래픽 엔지니어링의 호 차단율과 대역폭 차단율을 비교함으로써 망의 가용성이 기존의 다중경로 설정보다 높음을 보인다. In a MPLS(Multiprotocol Label Switching) network, it is important to reduce the number of labels and LSP(Lable Switched Path)s for network resource management. MTP(Multipoint-to-Point) LSP can be used to solve this problem. In consideration of traffic engineering, MTP LSP must be chosen to enhance the availability of network and link utilization. Also, a fast mechanism to setup MTP LSPs is required for rerouting capability against link failure. In this paper, we propose a fast MTP LSP traffic engineering of multipath MTP LSP by using a mapping of a MTP LSP upon Diffserv PHBs(Per Hop Behavior) in a Diffserv-capable MPLS network. In the proposed traffic engineering, we determine multiple MTP LSPs in a hierarchical manner according to the characteristics of different services. By using Monte-Carlo method for traffic load balancing process, it provides fast rerouting capability in case of frequent link failure across large network. Out method produces to be nearly optimal within reasonable run-times. It's time complexity is in O( Cn$^2$logn) as conventional multipath routing and it is much faster than Linear Programming approach. Simulation results show that the proposed traffic engineering can be controlled effectively in an administrative manner and enhance the availability of network in comparison with conventional multipath routing.

이동통신용 음성부호화기에서의 LSP 계산시간 감소에 관한 연구

민소연(Min, So-Yeon) 한국산학기술학회 2007 한국산학기술학회논문지 Vol.8 No.3

본 논문에서는 EVRC 시스템에 사용되어지는 실근 방식의 계산량 감소 알고리즘을 제안한다. 실근 방법에서 는 다항식에서의 근을 구하여 LSP로 변환하는 과정이 필요하다. 그러나, 근을 구하는 과정에서 주파수 대역을 순차적으로 검색하므로 계산시간이 많이 소요된다. LSP 파라미터의 중요한 특징은 대부분의 계수가 특정 주파수 대역에 주로 분포한다는 것이다. 그러므로, 본 논문에서는 실근 방식에서의 계산시간을 줄이기 위하여 1KHz 대역까지는 선형 적이고 1KHz 대역 이상에서는 로그 스케일인 멜 스케일을 사용하였다. 실근 방식과 제안한 방법을 비교하기 위하여 두 가지를 측정하였다. 첫째, 제안한 방법에서의 LSP 파라미터의 값과 실근방식에서의 LSP 파라미터 값을 비교하였다. 둘째, 계산 시간 감소율을 측정하였다. 실험결과, LSP 파라미터의 값은 변화하지 않았으며 계산량은 약 48% 정도 감소하였다. We propose the computation reduction method of real root method that is used in the EVRC(Enhanced Variable Rate Codec) system. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSP. However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. But, the important characteristic of LSP is that most of coefficients are occurred in specific frequency region. So, to reduce the computation time of real root, we used the mel scale that is linear below 1kHz and logarithmic above. In order to compare real root method with proposed method, we measured the following two. First, we compared the position of transformed LSP(Line Spectrum Pairs) parameters in the proposed method with these of real root method. Second, we measured how long computation time is reduced. The experimental result is that the searching time was reduced by about 48% in average without the change of LSP parameters.

LSP 파라미터 분포특성을 이용한 주파수대역 조절법에 관한 연구

민소연,배명진 한국음향학회 2002 韓國音響學會誌 Vol.21 No.3

LSP (Line Spectrum Pairs) 파라미터는 음성코덱 (codec)이나 인식기에서 음성신호를 분석하여 전송형이나 저장형 파라미터로 변환되어, 주로 저전송률 음성부호화기에 사용된다. 그러나 LPC (Linear Predictive Coding) 계수를 LSP로 변환하는 방법이 복잡하여 계산시간이 많이 소요된다는 단점이 있다. 기존의 LSP변환 방법 중 음성 부호화기에서 주로 사용하는 실근 (real root)방법은 근을 구하기 위해 주파수 영역을 순차적으로 검색하기 때문에 계산시간이 많이 소요되는 단점을 갖는다. 본 논문에서 기존의 실근 방법과 비교 평가한 알고리즘은 첫 번째 검색 대역에 멜 스케일 (met scale)을 사용하였고, 두 번째는 LSP 파라미터의 분포 특성을 조사하여 이를 토대로 검색구간의 순서와 검색간격을 달리 하였다. 실험결과, 기존의 실근 방식에 비하여 두 가지 방식 모두가 변환시간의 47% 이상이 감소되는데 반하여 동일한 근을 찾음을 알 수가 있었다. We propose the computation reduction method of real root method that is mainly used in the CELP (Code Excited Linear Prediction) vocoder. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSP. However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. In this paper, to reduce the computation time of real root, we compare the real root method with two methods. In first method, we use the mal scale of searching frequency region that is linear below 1 kHz and logarithmic above. In second method, The searching frequency region and searching interval are ordered by each coefficient's distribution. In order to compare real root method with proposed methods, we measured the following two. First, we compared the position of transformed LSP (Line Spectrum Pairs) parameters in the proposed methods with these of real root method. Second, we measured how long computation time is reduced. The experimental results of both methods that the searching time was reduced by about 47% in average without the change of LSP parameters.

航空城之觀光專業英、華、日、韓語教學研究初探

趙順文(TIO Sun-bun) 동북아시아문화학회 2012 동북아시아문화학회 국제학술대회 발표자료집 Vol.2012 No.10

In order to help college students who wish to work in Aerotropolis develop specialized language skills of English, Mandarin Chinese, Japanese and Korean in workplace, this study attempts to illustrate how linguistic theories of construction grammar, valence grammar and pragmatics as well as 3D multiuser virtual learning technology, can be applied in tourism LSP (Language for Specific purpose) training courses. Although currently the linguistic theories and the 3D technology employed in this study may not be pervasively used in designing teaching materials and training courses for tourism LSP, the findings are expected to provide more practical teaching resources and teaching demonstrations for tourism LSP, and help to conduct further research on LSP.

유한요소 시뮬레이션을 이용한 LSP 시간변수가 잔류응력에 미치는 영향 분석

김주희(Ju Hee Kim),김윤재(Yun Jae Kim),배홍열(Hong Yeol Bae),오창영(Chang Young Oh),김지수(Ji Soo Kim),김정수(Joung Soo Kim) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.10

Laser shock peening (LSP) is an innovative surface treatment technique. LSP residual stress distributions are affected by many variables. Variables in relation to time of these variables are main factors to decide to convergence of finite element analysis (FEA) and characteristics of pressure pulse of laser system. Variables related to convergence of FEA are stability limit time for stable convergence of results and solution time for dynamic analysis, and variables related to characteristics of pressure pulse of laser system are pressure duration time and laser pulse interval time for multiple LSP. In the present work, we have conducted to confirm the influence of time parameters of LSP on residual stress results using FEA, and predicted optimized range of time parameters.

해상도 조절과 검색순서 조절을 통한 음성부호화기용 복잡도 감소 알고리즘

민소연(Min, So-Yeon),이광형(Lee, Kwang-Hyoung),배명진(Bae, Myung-Jin) 한국산학기술학회 2007 한국산학기술학회논문지 Vol.8 No.5

일정한 스펙트럼 민감도와 낮은 스펙트럼 왜곡을 보이고 선형 보간이 용이하다는 장점을 갖는 LSP 파라미터는 음성코텍(codec)이나 인식기에서 음성신호를 분석하여 전송형이나 저장형 파라미터로 변환되어, 주로 저전송률 음성부호화기에 사용된다. 그러나 LPC 계수를 LSP로 변환하는 방법이 복잡하여 계산시간이 많이 소요된다는 단점이 있다. 기존의 LSP 변환 방법 중 음성 부호화기에서 주로 사용하는 real root 방법은 근을 구하기 위해 주파수 영역을 순차적으로 검색하기 때문에 계산시간이 많이 소요되는 단점을 갖는다. 본 논문에서 제안하는 알고리즘은 LSP 분포 특성에 따라 검색구간의 순서와 검색간격을 달리하며, 제1 포만트와 제2 포만트의 연관성을 고려하여 검색구간을 조절한다. 기존의 real root 방법과 제안한 방법을 비교한 결과 검색시간이 평균 48.13% 단축되었다. We propose the complexity reduction algorithm of real root method that is mainly used in the Vocoder. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSP(Line Spectrum Pairs). However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. The important characteristic of LSP is that most of coefficients are occurred in specific frequency region. So, the searching frequency region is ordered and adjusted by each coefficient's distribution in this paper. Transformation time can be reduced by proposed algorithm than the sequential searching method in frequency region. When we compare this proposed method with the conventional real root method, the experimental result is that the searching time was reduced about 48% in average.

광인터넷에서의 Edge Optical Label Switched Router의 구조에 관한 연구

최규봉,이현태 한국정보통신학회 2001 한국정보통신학회논문지 Vol.5 No.7

최근에 경제적인 대안으로 IP over WDM 네트워크가 주목을 받고 있다. IP over WDM은 광대역 수용 능력, 네트워크 확장성 외에 여러 장점을 가지고 있다. IP 기반에서, "lambda-labeling"은 IP over WDM에 직접적으로 적용할 수 있다. 본 논문에서는 현재 IETF측 중심으로 연구중인 MPLambdaS 개념을 기초로 하여 광 인터넷의 진화를 고려한 구조적인 접근 방법을 연구한다. MPLS 도메인과 MPLamdaS 도메인간에 연동을 고려하여 전자적인 다수의 LSP를 광 LSP로 모으는 레이블 스택 개념을 이용한 람다 LSP 터널링 기술을 적용하여 전자적인 MPLS 와 광 MPLamdaS 간의 연동 방안을 제안하고 이를 지원하는 Edge Optical LSR의 구조를 제안한다. 구조를 제안한다. In recent years there has been a lot of interest in carrying IP over WDM networks in an efficient manner. The benefits here include larger bandwidth capacities, better network scalability, and more efficient operation. W based approach, termed "lambda-labeling" is presented for direct If over WDM integration. In this paper, we study on architecture approach method consider of optical Internet evolution that based on MPLamdaS conception of IETF. Label stack conception collect electronic LSP of optical LSP. This paper is proposed method of co-operation between MPLS domain and MPLambdaS domain. Additionally, proposed architecture of Edge Optical LSR.tical LSR.

Study on effect of time parameters of laser shock peening on residual stresses using FE simulation

김주희,김윤재,이종우,유삼현 대한기계학회 2014 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.28 No.5

Laser shock peening (LSP) is the newest and most innovative surface treatment technique. LSP residual stress distribution is affectedby many parameters. Of them, the parameters are main factors that determine the convergence of finite element analysis (FEA) and characteristicof pressure pulse of laser system. The parameters, related to the convergence of FE simulation, are stability limit time for thestable convergence of results, and solution time for dynamic analysis. The other parameters, related to characteristics of pressure pulse oflaser system, are pressure pulse duration time and laser pulse interval time for multiple LSP. In the present work, we have conducted toconfirm the influence of time parameters of LSP system on residual stress results using FEA, and we have also predicted optimized rangeof time parameters.

New Gene Profiling in Determination of Breast Cancer Recurrence and Prognosis in Iranian Women

Poorhosseini, Seyed Mohammad,Hashemi, Mohammad,Olyaei, Nasrin Alipour,Izadi, Amir,Moslemi, Elham,Ravesh, Zeinab,Hashemi-Gorji, Feyzollah,Kheiri, Hamid Reza,Yassaee, Vahid Reza Asian Pacific Journal of Cancer Prevention 2016 Asian Pacific journal of cancer prevention Vol.17 No.no.sup3

Breast cancer (BC) is the second most common cancer in the world and by far the most frequent cancer among women, with an estimated 1.67 million new cancer cases diagnosed in 2012 (25% of all cancers). Polygene expression analysis is used to predict the prognosis and determine the most appropriate treatment regimen. The objective of this study was to examine the gene expression profiles of SIRT3, HRAS, LSP1, SCUBE2 and AP2A2 in Iranian women with BC.A total of 136 patients including healthy controls were categorized into three groups based on the relapse of the disease. Expression of desired genes in formalin-fixed, paraffin embedded tissues collected from all groups of participants was analyzed via the RT PCR method. RNA extraction and cDNA synthesis were performed then real-time quantitative PCR was carried out. Gene expression analysis revealed that the expression of SIRT3 was equal among patient and control groups. LSP1 was down regulated in all patient groups relative to controls but reduced expression in the metastatic group relative to the non-metastatic one was not significant. HRAS was significantly overexpressed in total and metastatic tumor samples versus normal but not in non-metastatic cases. SCUBE2 expression showed significant over-expression in both overall tumor samples and the non-metastatic group as compared to normal tissues. Gene expression level of AP2A2 in all groups was not detectable. Our data are compatible with a tumor suppressor role of LSP1 related to potential prognostic factor for tumor recurrence and outcome. This study for the first time assayed the prognostic value and changes in the expression of SIRT3, LSP1, HRAS, SCUBE2 and AP2A2 genes in women with breast cancer in the Iranian population and findings confirmed potential biomarker and prognostic capability of these genes. Such expression profiling data can critically improve prognosis and treatment decisions in cancer patients.

Effects of simulation parameters on residual stresses for laser shock peening finite element analysis

Ju Hee Kim,김윤재,Joung Soo Kim 대한기계학회 2013 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.27 No.7

By using finite element analysis, we proposed an applicable finite element method of laser shock peening (LSP) and discussed various parameters, such as solution time, stability limit, dynamic yield stress, peak pressure, pressure pulse duration, laser spot size, and multiple LSP. The effects of parameters related to the finite element simulation of the LSP process on the residual stresses of 35CD4 30HRC steel alloy are discussed. Parametric sensitivity analyses were performed to establish the optimum processing variables of the LSP process. In addition, we evaluated the effects of initial residual stress, such as welding-induced residual stress field.