흰쥐중심편도체핵에서 Neurotensin 면역양성세포의 다리옆핵으로의 투사

박인식,최정화,박봉수,백선용,김봉선,김재봉,김진정 대한해부학회 1996 Anatomy & Cell Biology Vol.29 No.2

익수환아의 예후에 영향을 미치는 인자에 관한 연구

김용배,정대봉,조수형,조남수,박영봉,박상기,김춘호,양은석,문경래 大韓應急醫學會 1998 대한응급의학회지 Vol.9 No.3

Drowning is the second most common cause of accidental death of children in Korea. But the study of near-drowning is very rare in Korea. The purpose of our study is to determine the factors that may influence survival on the basis of submersion time, consciousness state upon admission to hospital, the kinds of water, laboratory findings and neurological outcomes. The survey was performed by a retrospective cohort study on 28 near-drowning victims of less than 15 years of age who were admitted to the emergency room in the Chosun University Hospital between May 1988 & May 1997. The results were as follows :1)Sex distribution was 22 males and 6 females. 2) Submersion time was <5 minutes in 9 cases, 5-9 minutes in 6 cases, 10-14 minutes in 5cases, 15-19 minutes in 3 cases, ≥20 minutes in 5cases. 3) Comatose patients upon arrival were 6/7 cases in the death group(86%) and 2/21 cases in the improved group(10%). They had unfavorable outcomes(P<0.05). 4) The first PH value was mean 7.02±0.12 in the death group and mean 7.31±0.13 in the improved group. There was a statistically significant difference between the death and the improved group(P<0.05) 5) The patients who gad increased blood glucose concentration were all 7 cases in the death group and 12/22 cases in the improved group(54%). The mean blood glucose concentration was mean 424.7235.6㎎/㎗ in the death group and mean 140.182.7㎎/㎗ in the improved group. There was a statistically significant difference between the death and the improved group(P<0.05). 6) The patients who had pulmonary edema upon arrival were all 7 cases in the death group and 1/21 cases in the improved group(46%). They had unfavorable outcomes(P<0.05). 7) The patients who had been submerged more than 15 minutes were all 7 cases in the death group and 6/21 cases in the improved group(5%). They had unfavorable outcomes(P<0.05). We conclude that pediatric victims of near-drowning can be assigned to high or low likelihoods of unfavorable our outcomes with the use of five variables ; comatose mentation upon arrival decreased initial blood pH, increased initial blood glucose concentration, pulmonary edema, and maximum submersion time estimated longer than fiften minutes. This prediction rule may be useful if it can be validated in another cohort.

최적의 다층신경망을 이용한 영상 검색 알고리즘

박수봉 東新大學校 1999 論文集 Vol.11 No.-

In this paper, we propose a image search algorithm using back-error propagation learning based on WMRV. We capture images of 256×256 size with gray scale 256 levels from input images which were having monotonous background in the condition of same lumination and distance. After removing noises with a pre-processing process and edge detection, we detect a characteristic region. From this region we extract characteristic vectors using DCT(Discrete Cosine Transform). In case of human face image, we could see edge lineaments are distributed eye brows and a eyes in large numbers. Using this feature we detect a square area including eye brows, eyes, a nose, and a mouse which were contained most of human face information. And we use this square area as input data for multilayer neural network so that recognize a human face after learning process. In DCT processing with a square area which were extracted, the calculation time was reduced 49% than processing of entire facial image. Through simulation results, it shows many improvement in convergence speed. After simulation for 30 persons with 10 images per person(total 300 images), we proved 100% of recognition rate and shows 94% recognition rate for 50 persons which weren't learned by multilayer neural networks.

에어-오일 윤활에 의한 공작기계 주축계의 고속화연구

朴京鎬,崔大奉,金洙泰 國立 昌原大學校 産業技術硏究所 1992 産技硏論文集 Vol.6 No.-

According to the development of cutting tools, the high speed of machine tool's spindle is needed, and the demands for the precision machining, the improvement of light materials' productivity and etc. are increased. The spindle of machine tool with the maximum speed, ??·N, has lately been used and that over ??·N has been studied in advanced countries. In the country, the study on this field is needed because the spindle with the speed,??·N, is used up to now. Therefore, the study is carried out for the high speed spindle design, the lubrication system and the development of spindle unit.

이차원 LMS 알고리즘의 Systolic Array 구현

박완수,최훈,홍기섭,박봉수,배현덕 충북대학교 컴퓨터 정보통신 연구소 2000 컴퓨터정보통신연구 Vol.8 No.1

적응알고리듬의 VLSI 구현에 있어서 파이프라이닝이나 시스토릭과 같은 구조적 설계기법을 이용하여 알고리듬을 변환하는 것은 효과적이다. 알고리듬 변환은 z-변환 영역에서 연산의 규칙성과 반복성을 찾아 이루어 진다. 본 논문에서는 이차원 필터와 계수갱신 시스템을 시스토릭 구조로 설계하여 LMS의 확장 형태인 TDLMS을 STDLMS로 변환한다. 변화된 STDLMS를 이용 이차원 ALE를 Altera사의 Max-PlusII 상에서 구현하여 시뮬레이션을 통해 성능을 평가한다. 시뮬레이션 결과 salt-pepper 잡음과 가우시안 잡음에 오염된 화상을 ALE가 개선할 수 있음을 보였다. In VLSI realization of adaptive algorithm. it is necessary and efficient that the algorithm is transformed to structural one suitably using architectural design techniques such as pipelining or systolic array. These transform method use regular and recursive of operation of the algorithm on z-transform domain. In this paper, the TDLMS which is a extended version of LMS is transformed to STDLMS which has systolic array architecture in two dimensional filter and coefficients update system. The transformed STDLMS is applied for realization of two dimensional ALE. And the ALE performances are evaluated by Max-PlusII of Altera Co.. The simulation results show that the ALE enhances image data which were corrupted by salt-pepper noise and Gaussian noise.

Cone-beam CT를 이용한 안면비대칭자에서 이부편위에 따른 치성보상의 양상분석

박수병,박정희,정연화,조봉혜,김용일 대한치과교정학회 2009 대한치과교정학회지 Vol.39 No.5

Objective: The purpose of this study was to evaluate the correlation between menton deviation and dental compensation in facial asymmetry. Methods: Tooth axis and distance of first molar and canine to the reference plane were investigated by cone-beam computerized tomography. The subjects consisted of 50 patients with asymmetric mandibles (male 21, female 29, mean age 24.3 years). Control groups were also assessed (male 11, female 9, mean age 25.6 years). Nine measurements (5 linear measurements and 4 angular measurements) were measured in order to evaluate the correlation between menton deviation and the linear and angular difference of first molar and canine in the deviated and none-deviated sides using the defined MPR images. The differences between deviated and non-deviated side, according to menton deviation, were statistically analyzed using stepwise multiple regression analysis. Results: From the result, Menton deviation was negatively correlated with mandibular first molar's angular measurement (Δ∠LM6-Mn plane (dev.-ndev.)) and positively with maxillary fist molar's angular measurement (Δ∠UM6-FH plane (dev.-ndev.)) (p < 0.01). Two angular measurements (Δ∠ LM6-Mn plane (dev.-ndev.), Δ∠UM6-FH plane (dev.-ndev.)) explained the variability in menton deviation with a significant r² value of 0.589. Conclusions: This study suggests that the tooth axis of upper and lower first molars leans towards the deviated side of Menton when there is mandibular asymmetry with Menton deviation. 본 연구는 Cone-beam CT의 MPR이미지상에서 하악골 평면에 대한 하악 제1대구치와 견치의 편위측과 비편위측의 높이와 각도차이 그리고 FH 평면에 대한 상악 제1대구치와 견치의 편위측과 비편위측의 높이와 각도차이를 계측함으로써 안면비대칭자에서 이부편위에 따른 편위측과 비편위측의 제1대구치와 견치의 높이와 협설측 경사도를 CBCT를 이용하여 분석하고 그 관련성을 알아보는 데 있다. 연구대상은 하악골의 이부편위를 동반한 안면비대칭 환자 50명(여자 29명, 남자 21명, 평균나이 24세 4개월)으로 하였다. 대조군으로 평균나이 25세 7개월인 20명(남자 11명, 여자 9명)을 분석하였다. 결과는 이부편위에 대해 FH 평면에 대한 상악 제1대구치의 편위측과 비편위측의 길이 및 각도 차이(편위측 - 비편위측)는 대조군에 대해 통계적으로 유의한 차이가 존재하였다 (p < 0.01). 비대칭군에서 상악 제1대구치 각도는 편위측이 비편위측보다 평균 8.62 ± 5.95˚ 컸다 (p < 0.01). 상악 견치의 경우에도 편위측과 비편위측의 각도차이가 평균 4.48 ± 5.05˚로 통계적으로 유의한 차이가 존재하였다 (p < 0.01). 하악골 평면에 대한 하악 제1대구치의 수직 길이와 각도는 편위측과 비편위측에서 통계적으로 유의할 만한 차이가 존재하였다 (p < 0.01). 각도의 차이는 평균 -11.92 ± 5.79˚로 나타났다. 이부편위에 대한 상하악 제1대구치와 견치의 수직거리 및 각도의 Pearson 상관분석 및 회귀분석 결과, FH 평면에 대한 상악 제1대구치의 편위측과 비편위측의 각도차이(Δ∠ UM6-FH plane (dev.-ndev.))는 통계적으로 유의한 양의 상관관계를 나타내었고, 하악골 평면에 대한 하악 제1대구치의 편위측과 비편위측의 각도차이(Δ∠LM6-Mn plane (dev.-ndev.))는 통계적으로 유의한 음의 상관관계를 나타내었다. 이상의 결과에서 이부편위를 동반한 하악골 비대칭이 존재하는 경우, 이부가 편위되는 방향으로 상하악 제1대구치의 치아장축의 각도가 변화되는 것으로 나타났다.

여가스포츠 참여자의 특성에 따른 여가인지에 관한 문화기술적 분석

박수정,박봉섭 한국스포츠리서치 2004 한국 스포츠 리서치 Vol.15 No.2

The purpose of this study was to investigation of leisure perceived of the casual and serious leisure participants. In order to accomplish the purpose of the study above, the present study used Phenomenological Approach, one of qualitative study methods widely used. The participants of this study are consisted of 3 males and 3 females, of which have engaged in golf, swimming and in-line skate sports for more than 2 year. As data collection methods, this study employed In-Depth Interview Method. The conclusions of this study are as follow: First, the leisure perceived was difference between casual and serious leisure participants. Second, the leisure motivation was not difference. Third, the leisure attitude was difference between casual and serious leisure participants. Forth, he leisure constraint was difference between casual and serious leisure participants.

백일주 양조중 맛성분의 변화

박석규,박필숙,손봉수,문주석 순천대학교 기초과학연구소 1993 基礎科學硏究誌 Vol.4 No.-

Changes in taste components of Backilju, an old Korean cleraed rice wine, were investigated. During brewing, pH and titratable acidity of mash were decreased or increased in the range of 3.41→3.81 and 8.62→6.74, respectively. The final product of Backilju filtrate, fermented for 100 days, contained 0.36% reducing sugar, 2.68% total sugar, 606.6 ㎎% total acid, 2.5 ㎎% volatile acid and 22.9㎎ solid/ml extract. Major volatile components analized by GC/MS methods were 3-methyl-1-butanol acetate, 4-decanol and dimethyl disulfide. Calcium(20.26ppm) was the most abundant, followed by magnesium(3.19ppm) and zinc(1.87ppm). Nucleotides and their related compounds were inosine(0.12→0.44 mM/ml), ADP(0.16→0.33 mM/ml) and hypoxanthine(0.33→0.04 mM/ml). Compared with other Korean traditional Yakju, Backilju contained more total acid and mineral but less sugar and volatile acid.

실온에서 Al-SiO_2-Si(100)_p형 계의 경계면 반응

박동수,손기수,이원식,박봉두 慶北大學校 物理化學硏究所 1985 硏究論文集 Vol.6 No.-

실온에서 알루미늄 산화층(SiO_2)-반도체〔Si(100)_p형〕 소자의 경계면 반응을 Ar^+이온 sputter총을 부착한 AES로 수행했다. SiO_2-Si 경계면은 Si-Si 결합, Si-O 결합의 두 가지 상태를 갖고 있으며, 경계면 넓이는 약 30Å였다. Al-SiO_2-Si 반도체 소자의 경계면 반응은 SiO_2 속의 자유 실리콘이 알루미늄 표면으로 확산되고, 알루미늄과 SiO_2 경계면에 대량의 자유 실리콘이 존재한다. Al-interfacial layer(SiO_2)-semiconductor Si(100)_p-type structures were investigated by the Auger Electron Spectroscopy. The results of depth profiling Ar^+ -ion sputtering are presented for the SiO_2-Si(100)_p-type cell. In the interface, Silicon exists in only two distinct bonding states: Si-Si or Si-O bonding. The exact width of the interface is known as indefinite, but here we estimate it approximately 30Å. The results of depth profiling Ar^+ -ion sputtering are also presented for the Al-SiO_2-Si(100)_p-type cell. Metal(Si) atoms from deposited interfacial oxide layer were observed on the Al surface. The interfacial reaction takes place between Al and the interfacial layer at the room temperature. The diffusion of metal(Si) atoms from the interfacial layer towards the Al surface is suspected to play a role in degradation effect in the MIS solar cells.

農業機械 所有農家의 營農實態 調査 硏究 : 동력경운기, 동력탈곡기, 동력탈맥기를 중심으로 Concenfrating on Power Tillers, Threshers, and Barley Threshers

박노석,정봉수 진주산업대학교 1972 論文集 Vol.10 No.-

This is the second step investigation of the usage and the Custom Work on the actual Conditon of Agricultural machinaries in Chinju area. Power tillers threshers and barely threshers were investigated for this examine and the results are as follows, 1. In percentage by age of agricultural machinaries, it was the highest between 31 and 40 with 30%. 2. Ones who had their own power tiller was 93.9% of the whole proprietor. 3. In the age of proprietor, farmers below the primary sehool level kept 46.4% and farmers above the high school had 31% in power case. 4. The average number of days for the farmers own use of their threshers and barley threshers is less than 5 days per year, but 35% of the farmers who custom work for 6-10 days occupys the highest percentage and 33.3% of them custom work for 11~15 days per year. 5. Income from power tiller are the highest as 47% with carring among the whole incomes of the cultivates, seeding and carryings.