권역심뇌혈관질환센터 사업의 비용-편익 분석

김병호 ( Byung Ho Kim ),감신 ( Sin Kam ),배상근 ( Sang Geun Bae ),김건엽 ( Keon-yeop Kim ),이원기 ( Won Kee Lee ),홍남수 ( Nam-soo Hong ),박형근 ( Hyeung-keun Park ),이혜진 ( Heyjean Lee ),조은정 ( Eun-jung Cho ),채성철 ( Shung C 한국보건정보통계학회(구 한국보건통계학회) 2017 보건정보통계학회지 Vol.42 No.1

Objectives: This study was conducted to investigate economic feasibility of operating Regional Cardiocerebrovascular Centers using cost-benefit analysis. Methods: The current study assessed cost and benefit data collected from nine hospitals which were designated as Regional Cardiocerebrovascular Centers between 2008 and 2010. Results: The operation of Regional Cardiocerebrovascular Centers reduced mortality rate and length of stay due to acute myocardial infarction and stroke and also decreased disability occurred after stroke. The total calculated cost of operating nine Regional Cardiocerebrovascular Centers was 19.85-22.30 billion won and the minimum benefit calculated was 23.98 billion won. Applying the maximum cost and the minimum benefit, the net benefit was 1.68 billion won, which is estimated to 190 million won per Regional Cardiocerebrovascular Center. Conclusions: The present study revealed that the operation of Regional Cardiocerebrovascular Centers was economically beneficial. The benefit would be larger if intangible benefit such as the long-term effects to community hospitals and enhancement of quality of life of patients and their families are considered.

毛澤東의 軍事思想 小考

李基遠 동국대학교 행정대학원 1975 행정논집 Vol.6 No.-

단면의 성질을 적용한 크기와 회전 변화에 불변인 영상 검사 시스템

이용중,김태원,김기대,류재엽 한국공작기계학회 2001 한국공작기계학회 춘계학술대회논문집 Vol.2001 No.-

The purpose of this paper is to develop image inspection system endows an automatic operating and measuring that the moment values are invariant with respect to variable object size and rotation. In this paper, using these moment feature vector with Hu's 7 invariant moment is also given. The charasteristics of section which is applied in the mechanics used moment descriptor of invariant moment detection algorithm for image inspection system. Corresponding rates between 94% and 96% have been achived for all object tested.

HPV에 감염된 자궁경부 상피세포의 Keratin 아형 변화에 관한 연구

기근홍,이영미,장원재,임용,임성철,김창원,전호종 조선대학교 1994 The Medical Journal of Chosun University Vol.19 No.2

The human papillomavirus (HPV) are wide spread in the world, causing proliferation of epidermal and mucosal surface. Certain papillomaviral types are oncogenic in vivo and in vitro. HPV DNA has been detected in most of cervical lesions such as condyloma acuminata, dysplasias, and invasive carcinomas. The materials for this study consisted of 5 dysplasias. 5 squamous cell carcinomas, and 5 exocervix for control, that resected for definite treatment of uterine disease at Chosen University Hospital from January, 1991 to December, 1993. All cases were performed of in situ hybridization for HPV DNA type 6/11, 16, and 18. And also immununohistochemical stain for panel of monoclonal cytokeratin (CK) antibodies were done. The result obtained is as fallows : 1. HPV DNA type 6/11 are detected in all dysplasias. HPV DNA type 16 and 18 are detected in squamous cell carcinomas. 2. Stratifed squamous epithelium of exocervix are positive staining for CK 1, CK 5/6, CK 8, CK 13, CK 14, and CK 19. HPV DNA type 6/11 infected cells are positive for CK 1, CK 13, CK 14, CK 17, CK 18, and CK 19. HPV DNA type 16/18 infected cells are positive for CK 1, CK 5/6, CK 10, CK 13, CK 14, CK 17, CK 18, and CK 19. In conclusion, HPV infection of uterine cervix is associated with change of normal cytokeratin expression pattern. Dysplastic cells are changed of CK 5/6, CK 8, CK 17 and CK18. Squamous cell carcinoma cells are changed of CK 8, CK 17, and CK 18.

요골 두 아탈구와 동반된 상완골 내 상과 골절 : 1예 보고 A Case Report

이한용,유기원,정진영,송주현,고해석,강용구,손문익 대한골절학회 2003 대한골절학회지 Vol.16 No.2

주관절 손산 중 상완골 내 상과 골절은 단독으로 혹은 주관절 탈구와 동반되어 발생하는 것이 일반적이다. 저자들은 15세 남자 환자의 좌측 요골 두 아탈구가 동반된 상완골 내 상과 골절을 경험하였다. 도수 정복을 시도하였으나 요골 두 아탈구의 정복을 얻을 수 없어 관혈적 정복술로 치료하엿다. 6개월추시 결과 후휴증이 없는 정상적인 관절 상태를 확인할 수 있었다. 연령, 원인 , 손상 기전으로 분석해 보면 이 동반 손상은 발생하기 매우 어렵고, 문헌 탐색 결과 현재까지 동일한 증례를 찾아볼 수 없었으므로 보고하는 바이다. It has been known that fracture of medial epicondylar apophysis of distal humerus may be isolated of associated with elbow deslocations. We have experienced a case which medial epicondylar fracture of the distal humerus was associated with subluxation of the radial head. Initially, we had tried reduction of subluxated radial head by closed method, but failed. Finally open reduction gad been performed. At 6 month after open reduction, clinical and radiological result were excellent. As it is difficult for those associated injuries to occur simultaneously and the similar cases never have been reported yet, we would like to present this case with a review of the literature.

알루미늄 연속주조 용탕의 탈 가스 일체화 장치 개발

이용중,김태원,김기대,류재엽,이형우 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to the producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition, the amount of the produced sludge can also be reduced by 60~80% maximum compared with the existing methods. Then, it makes it possible to minimize the loss of metals. Moreover, the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevention effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition, it can protect the blending of precipitation impurities. Because it has a monolithic configuration, it can avoid the use of additional energy to compensate the temperature decreasing about 60? that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

Study on a Dynamic master system for Controller Area Network

Won,Ji-Woon,Hong,Won-Kee,Lee,Yong-Doo 한국정보기술응용학회 2005 한국정보기술응용학회학술대회 Vol.2005 No.1

일산화탄소 중독이 생쥐 신장의 Alkaline phosphatase 활성에 미치는 영향

이홍식,배기원 보건장학회 1975 보건장학회보연구논문집 Vol.4 No.-

소아 대퇴골 간부 골절에 대한 조기 고수상 석고 고정술

이한용,유기원,정진영,손문익,김창기,강용구 대한골절학회 2003 대한골절학회지 Vol.16 No.1

목 적 : 소아 대퇴골 간부 골절의 여러 가지 치료 방법 중 조기 고수상 석고 고정술의 유용성을 알아보고자 시행하였다. 대상 및 방법 : 대퇴골 간부 골절로 1997년 1월부터 2000년 12월까지 보존적 방법으로 치료를 시행받았던 10세 미만의 소아 중 심각한 동반 손상이 없고, 추시 기간이 최소 12개월이었던 환아를 대상으로 하였다. 총 27명, 27예 이었으며, 조기 고수상 석고 고정군(조기군)이 12예, 견인 후 고수상 석고 고정군(견인군)이 15예 이었다. 두 군에 대하여 각각 수상 시 연령, 성별, 수상 기전 등의 기본 자료를 분석하였으며, 재원 기간, 견인 및 고수상 석고 고정 기간, 재원 기간 동안의 방사선 촬영횟수, 고수상 석고 고정 직후와 최종 추시 소견에서의 각 변형 및 하지 부동 등의 임상적 및 방사선학적 자료와 입원 기간 중의 총 진료비를 비교 분석하였다. 결 과 : 평균 연력은 조기군은 4.2세, 견인군은 5.3세 이었으며, 전체 연구 대상 중 남아가 24예로 88%를 차자하였고, 수상 기전은 교통사고가 20예(71%)로 가장 많았다. 재원 기간은 조기군이 평균 7.8일 이었으며, 견인군은 25.8일로 나타나 유의한 차이를 보였다. 수상 일로부터 석고 제거가지의 기간 즉 침상 안정기간은 각각 44.2일과 65.1일 이었다. 재원 기간 중 방사선 촬영 횟수는 조기군은 수상 직후 및 고정 후 각각 1회의 방사선 촬영을 하였으며, 견인군은 견인 및 정복의 정도를 파악하기 위하여 평균 6.9회의 방사선 검사를 시행하였다. 두 군 모두 최종 추시 때의 관절 운동 각도는 정상 범위에 속하였고, 고수상 석고 고정 직후와 최종 추시 소견 상 각 변형은 허용 범위 내에 있었으며, 하지 부동이 각 군에서 3예 씩 발생하였다. 총 입원 진료비는 견인군이 재원 기간의 증가로 인하여 약 2.4배의 비용이 더 필요하였다. 결 론 : 소아 대퇴골 간부 골절에 대한 조기 고수상 석고 고정술은 견인 후 고수상 석고 고정술과 비교하여 임상적 및 방사선학적 결과에서 유의한 차이가 없었으며, 재원 기간의 단축과 고정 기간의 감소를 통한 의료비 절감 및 환자 순응도를 높일 수 있었고, 방사선 촬영 횟수 감소로 소아 생식기에 대한 위험을 줄일 수 있었으므로 유용한 치료 방법이라고 판단되었다. Purpose : To evaluate an efficacy of immediate closed reduction and hip spica casting in pediatric patients with femoral shaft fractures. Materials and Methods : 27 cases of 27 pediatric patients who had seen treated conservatively for the femoral shaft fractures under 10 years of age were retrospectively reviewed. The cases with serious associated injuries were excluded. The hospital stay, duration of traction and hip spica cast, frequencies of plain radiographs, clinical and radiological outcomes at the final follow-up, and financial aspects were evaluated comparatively between the groups of immediate hip spica casting(12 cases) and traction-casting(15 cases). Results : The patients treated with immediate hip spica casting had a mean hospital stay of 7.8 days, compared with a mean of 25.8 days for those treated with traction and casting. The mean duration of immobilization were 44.2 days in the group of immediate hip spica casting, and 65.1 days in the group of traction and casting. The radiologic examinations were performed 2 times and 6.9 times respectively. The clinical and radiological outcomes at the final follow-up were good in both groups. Insignificant leg length discrepancies were seen in 3 cases each group. The total charges of traction and casting was 2.4 times higher than that of immediate hip spica casting. Conclusion : The immediate hip spica casting seems to be an effective method of treatment in femoral shaft fractures without serious associated injuries under 10 years of age because there are several advantages such as satisfactory result, shortened hospitalization and immobilization, reduction of total charges, and lowered the risk of radiologic exposures.

齒科嬌正用線材의 物理的 性質에 미치는 熱處理의 影響

李基大,權五源,成材鉉 慶北大學校 齒科大學 1985 慶北齒大論文集 Vol.2 No.1

The physical properties of .016" orthodontic wires by heat treatment were studied in tension, bending, hardness and microstructures. The wires were tested in the as-manufactured and heat-treated conditions. The results were as follows: Ultimate tensile strength and yield strength were slightly increased by heat treatment, but Elgiloy was the most effective by geat treatment. The strength of Elgiloy showed the highest value after heat treatment above 6 minutes at 500, 600℃. Also, bending fluxure modulus of elasticity were progressively increased by heat treatment. the hardness number of Australian of as-manufactured wires showed the highest value, and Elgiloy showed the highest value by heat treatment. Microstructure of as-manufactured wires showed fibrous interlocking grains, and a coarse grains after heat treatment and an austenite structure after solution heat treatment.