수생식물의 자연정화능을 이용한 오수처리에 관하여

유재근 한국환경생물학회 1990 환경생물 : 환경생물학회지 Vol.8 No.2

부하설비의 전력품질 분석을 위한 데이터 획득시스템에 관한 연구

유재근,이상익,최규하 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-

In order to analyze voltage, current, electrical power, harmonics and so on of electrical load equipments, electrical power analysis by real measurement rather than mathematical modeling is necessary, and plan of countermeasure for efficient management, energy frugality and accident prevention of electrical equipments using it is possible. Especially, electrical power analysis by real measurement is indispensable in order to consider countermove of harmonic occurred by nonlinear load. So, in this paper, we developed DSP(Digital Signal Processor) based low price date aquisition system, and verified it's ability by performing measurement and analysis of electrical power and harmonic in the real power system.

다이옥신과 독성

유재근 대한지방행정공제회 1999 도시문제 Vol.34 No.370

The Effect of TESPD and TESPT on the Stress Relaxation Behavior of Silica Reinforced Rubber Composites

유재근,김효준,박건욱,김동건 한국고분자학회 2014 한국고분자학회 학술대회 연구논문 초록집 Vol.2014 No.10

분무열분해 공정에 의한 주석산화물 나노분체 제조에 미치공기압력의 영향

유재근,김동희,Yu, Jae-Keun,Kim, Dong-Hee 한국재료학회 2011 한국재료학회지 Vol.21 No.12

In this study, nano-sized tin oxide powder with an average particle size of below 50 nm is prepared by the spray pyrolysis process. The influence of air pressure on the properties of the generated powder is examined. Along with the rise of air pressure from $0.1kg/cm^2$ to $3kg/cm^2$, the average size of the droplet-shaped particles decreases, while the particle size distribution becomes more regular. When the air pressure increases from $0.1kg/cm^2$ to $1kg/cm^2$, the average size of the dropletshaped particles, which is around 30-50 nm, shows hardly any change. When the air pressure increases up to $3kg/cm^2$, the average size of the droplet-shaped particles decreases to 30 nm. For the independent generated particles, when the air pressure is at $0.1kg/cm^2$, the average particle size is approximately 100 nm; when the air pressure increases up to $0.5kg/m^2$, the average particle size becomes more than 100 nm, and the surface structure becomes more compact; when the air pressure increases up to $1kg/cm^2$, the surface structure is almost the same as in the case of $0.5kg/cm^2$, and the average particle size is around 80- 100 nm; when the air pressure increases up to $3kg/cm^2$, the surface structure becomes incompact compared to the cases of other air pressures, and the average particle size is around 80-100 nm. Along with the rise of air pressure from $0.1kg/cm^2$ to $0.5kg/cm^2$, the XRD peak intensity slightly decreases, and the specific surface area increases. When the air pressure increases up to $1kg/cm^2$ and $3kg/cm^2$, the XRD peak intensity increases, while the specific surface area also increases.

지중 접속함(맨홀)의 누전감시 시스템 개발에 관한 연구

유재근,고봉운 국제차세대융합기술학회 2017 차세대융합기술학회논문지 Vol.1 No.4

본 논문은 지중접속함의 고장에 의한 감전사고를 방지하기 위한 연구이다. 도시의 미관과 안전을 위해 전기설 비의 지중화가 증가하고 있으며, 침수시 지중접속함 접속부에 고장이 발생되면 감전사고를 발생시킬 수 있다. 따라서, 침수시 누전이 발생되면 경보를 발생하여 사고를 예방하는 시스템을 개발하고 실험하여 그 성능을 입증하였다. This paper is a study to prevent electric shock accidents due to failure of handhole. The increase in urbanization has led to an increase in the undergroundization of electrical installations. If a fault occurs in the connection of the underground connection box during flooding, an electric shock may occur. Therefore, we have developed a system to prevent accidents by generating an alarm when leakage occurs, and proved its performance.

노이즈 필터링과 충분차원축소를 이용한 비정형 경제 데이터 활용에 대한 연구

유재근,박유진,서범석,Jae Keun Yoo,Yujin Park,Beomseok Seo 한국통계학회 2024 응용통계연구 Vol.37 No.2

Text indicators are increasingly valuable in economic forecasting, but are often hindered by noise and high dimensionality. This study aims to explore post-processing techniques, specifically noise filtering and dimensionality reduction, to normalize text indicators and enhance their utility through empirical analysis. Predictive target variables for the empirical analysis include monthly leading index cyclical variations, BSI (business survey index) All industry sales performance, BSI All industry sales outlook, as well as quarterly real GDP SA (seasonally adjusted) growth rate and real GDP YoY (year-on-year) growth rate. This study explores the Hodrick and Prescott filter, which is widely used in econometrics for noise filtering, and employs sufficient dimension reduction, a nonparametric dimensionality reduction methodology, in conjunction with unstructured text data. The analysis results reveal that noise filtering of text indicators significantly improves predictive accuracy for both monthly and quarterly variables, particularly when the dataset is large. Moreover, this study demonstrated that applying dimensionality reduction further enhances predictive performance. These findings imply that post-processing techniques, such as noise filtering and dimensionality reduction, are crucial for enhancing the utility of text indicators and can contribute to improving the accuracy of economic forecasts.

물관리정책의 평가와 발전 방향

유재근 한국환경정책학회 2002 한국환경정책학회 학술대회논문집 Vol.2002 No.10

분무 배소법에 의한 복합산화물의 제조공정 및 Mn-Zn ferrite의 자기 특성에 관한연구

유재근,이경익,이성수 한국자원리싸이클링학회 1999 資源 리싸이클링 Vol.8 No.4

The purpose of tlus sludy was to preparc raw material powder for Mn-Zn iclrile, h m mined mill scale and fero-Mn, usins a co-spray roasting process The mill scale and ferra-Mn uscd in this raalins process was rcf~nedb y mesn-ns of a slxc~apl rxcss ~nvolvinm~a te~ialsc ontalning imp~u-ltleso r less than 100 pprn In this study an effeclive spray roaster system. wllich produces fme complex oxide powder, collects produccd ~owder.,m d prcvel~tse ~~llssiooifi HCI gas. was also manufactured. By means of spray~ngp urifcd raw malerial solu~lionl nln a manufacued high tcmpervture rumace. &-ferrite powder and a comnpleu o ~ d e powder of Fe,O; and M,x203 were manufactured. The chmcterlstics of the composllion. surface urca, and p'miicle size dismbulion or the produced powder were exmined. ptoduced powdcr was then ~ m e dwi tli ZnO powder. aid olher addilives of defined cornposnion, and Mn-Zn femite cares werc praiuccil by meuns of Sorlning and closely controlled sintering processes. The magpelic p~oprlieso f c olo~ss, initlal permeability. mauin~u~mnn agnehc flux. coz~civcr orcc and residual magnccic flux for the above cores we,= measured, and fmm Il~ase I-csulls the eflicacy of lhe co-spray roasling pncess to pl.ellare raw material powder lor Mn-Zn ferntc was established 본 연구의 목적은 불순물들을 다량 함유한 mill scale과 ferro-Mn을 정제과정을 거쳐 불순물들의 함량을 100 ppm 이하로 감소시킨 후 이들을 원료로 사용하여 Mn-Zn ferrite 원료분말을 기존의 고상반응법이 아닌 분무배소 방법에 의해 제조하는데 있다. 이를 위하여 본 연구에서는 정제된 원료용액을 분무배소시킴으로써 고상의 미세한 복합산화물 분말을 형성시키며, 생성된 분말을 효율적으로 포집할 수 있을 뿐 아니라 유해 생성기체를 중화시킬 수 있는 분무배소로 system을 개발하였다. 또한 정제된 원료 용액을 본 연구에서 개발된 분무배소로 내로 투입시킴으로써 Mn-ferrite 및 $Fe_{2}O_{3}$와 $Mn_{2}O_{3}$의 복합산화물 분말을 제조하였으며, 이때 각각의 조건 하에서 생성된 분말들에 대해 조성, 비표면적 및 입도 분포 등의 물리적, 화학적 특성을 조사하였다. 분무 배소법에 의해 생성된 원료분말에 ZnO 및 기타 첨가제를 정해진 조성으로 혼합시킨 후 성형 및 엄격하게 제어된 소결과정에 의해 Mn-Zn ferrite core를 제조하였다. 또한 제조된 core에 대하여 손실값, 초투자율, 잔류자속밀도, 항자력 및 포화자속밀도의 자기적 특성을 측정하였으며, 이 결과들을 바탕으로 Mn-Zn ferrite 원료 분말을 제조하기 위한 분무배소방법의 타당성을 확인하였다.

폐산의 정제 기술 및 분무 배소법에 의한 복합 산화물과 Mn-Ferrite 분말의 제조

유재근,김정석,민병구,성낙일 한국자원리싸이클링학회 1998 資源 리싸이클링 Vol.7 No.4

본 연구의 목적은 분무배소법에 의해 조성과 입도분포가 매우 균일하고 고순도인 Fe 산화물과 Mn 산화물의 복합산화물 또는 Mn 페라이트 분말을 제조하는데 있다. 본 연구에서는 우선 염산 용액에$SiO_2$, P, Al, Ca, Na 등의 불순물들을 다량 함유하고 있는 Fe와 Mn 성분을 정해진 조성으로 용해시킴으로써 분무배소의 원료용액을 제조하였다. Na와 Ca를 제외한 대부분의 불순물들은 원료 산 용액의 pH를 약 3이상으로 유지시킴으로써 공침현상에 의해 효과적으로 제거되었으며 Na와 Ca 성분은 분말제조 후 수세에 의해 제거가 가능하였다. 반면 PVA, resin amine 등의 고분자 응집제들은 불순물 제거에 거의 효과가 없는 것으로 확인되었다. 본 연구에서는 불순물들이 효과적으로 제거된 정제된 산 용액을 노즐을 이용하여 고온의 배소로 내로 분무시킴으로써 Fe 산화물과 Mn 산화물의 복합 산화물 또는 Mn 페라이트 분말을 제조하였다. 이때 생성된 분말들은 매우 균일하게 혼합되어 있었으며, 배소로 내에서의 반응온도가 증가할수록 생성된 분말의 입도는 증가하였다. The purpose of this study is to produce high putity composite powder composed of Fe-oxide, Mn-oxide and Mn-ferrite having superior homogencity in composition and particle size distribution by co-roasting process. Binary component metal (Fe, Mn) chloride solutions were produced by dissolving mill scale and ferro-mangancse alloy in hydrochloric acid. These chloride solutions contained the impurities such as SiO$_{2}$, P, Al, Ca and Na, which were originated from the Fe/Mn source materials. The neutralization and polymeric coagulant method were adoped to refine the hydrochloric liquor. When pH is far below the isoelectric point (pH 2-3), the SiO$_{2}$ was the most effectively reduced element, while other impurities remained unchanged. By increasing pH above 3, most of the impurities could be reduced effectively due to the coprecipitation reaction. The polymeric coagulants such as poly vinyl alcohol, resin amine and ammonium molybdate were found to have no effect on the spray roaster designed by the authors. The produced oxide powders were confirmed to be mixtures of Fe-oxide, Mn-oxide and mn-ferrite. the powders were homogeneously mixed and the particle size increased sleeply with increasing co-roasting temperature.