http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Study on the Deformation of O.D 245mm Off-shore Plant Pipe by Induction Bending
주이환,김남용,김동선,류성기 한국기계가공학회 2022 한국기계가공학회지 Vol.21 No.8
Bending using high-frequency induction heating is used to bend pipes and sections, and is currently widely applied in industrial fields such as power generation facilities, ships, onshore plants, and offshore plants. The purpose of this study is to study the manufacturing process and design technology of high-frequency bending of pipe to make the best pipe design arrangement. Although various studies are being conducted in the field of high-frequency bending, more research is needed on high-frequency bending of pipes for ship building and offshore plants. The purpose of this study is to review the feasibility of production design using 3D model tool of S3D and AM(PDMS), and to review and improve bending thickness reduction, reduction rate, and roundness.
주이환(Yi-Hwan Joo),진진(Zhen Qin),문성민(Seongmin Moon),류성기(Sung-Ki Lyu) 한국기계가공학회 2020 한국기계가공학회지 Vol.19 No.4
Induction bending via high-frequency heating is widely used for manufacturing pipe and section steel bends. It allows productivity improvement, unit cost reduction, delivery time compliance, and good mechanical properties. The recent increase in high-end vessels and offshore plants has raised the demand for high-frequency bending, which should improve the product quality and reduce the costs by simplifying the fabrication process; therefore, the characteristics and performance of this technique must be studied and proper design technology is required. During hot pipe bending via induction heating, the outward wall thickness of the pipe is thinned due to tensile stress and this thickness reduction cannot exceed 12.5%. This study focused on pipe bends with a bending curvature of 5D and their optimization design; in particular, the conditions that can both improve the productivity of the high-frequency bending process and keep the maximum thickness reduction below 12.5% were determined.
가동 철심형 용접기와 정현파를 출력하는 디지털 용접기의 3점식 굽힘시험을 이용한 용접성 비교 분석
김종식,이광호,주이환,고종철,윤경열 국제문화기술진흥원 2023 The Journal of the Convergence on Culture Technolo Vol.9 No.1
In this study, in order to reduce energy that affects the natural environment, a moving iron core type welding machine and a digital welding machine (inverter type) with low power consumption are compared in shielded arc welding, and the parts that use less power and have the same weldability conditions are identified. want to check. The movable iron core welder uses alternating current that outputs a sine wave, and the digital welder also generates a sine wave alternating current, so it must have the same conditions, low power consumption, and the same weldability. However, weldability can be verified in various ways, but the analysis is limited to the qualification test in the field of national technical qualification welding. 본 연구에서는 자연환경에 영향을 주는 에너지를 절감하기 위해 피복아크용접에서 가동철심형 용접기와 전력 사용량이 적은 디지털 용접기(인버터 방식)를 비교하여 전력 사용은 적으며 용접성은 동일한 조건을 갖춰야 하는 부분을 확인하고자 한다. 가동철심형 용접기는 정현파를 출력하는 교류를 사용하며 디지털 용접기 또한 정현파 교류를 발생시켜 동일 조건을 갖추고 전력사용량은 적으며 같은 용접성을 갖추어야 한다. 다만 용접성은 다양하게 검증할 수 있으나 국가기술자격 용접 분야의 자격시험으로 한정하여 분석하고자 한다.