http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조대형 인문사회 21 2022 인문사회 21 Vol.13 No.1
은행지주회사의 소유구조가 경영성과에 미치는 영향조 대 형* 요약: 국내 은행지주회사는 금융지주회사법에 따라 엄격한 소유규제가 적용되고 있어 주식 소유가 분산되어 있으며 지배주주가 없다는 특징을 가진다. 하지만, 주요주주들의 구성이나 지분율의 합계는 은행지주회사별로 크게 차이가 있다. 이에 본 연구에서는 국내 은행지주회사의 소유구조가 경영성과에 미치는 영향을 분석하였다. 임의효과모형으로 패널분석을 실시한 결과, 주요주주지분, 외국인지분, 정부지분, 국민연금지분, 우리사주조합지분이 은행지주회사의 경영성과나 경영위험에 영향을 미치고 있는 것으로 나타났다. 특히, 우리사주조합지분율이 은행지주회사의 수익성에 미치는 영향이 두드러졌다. 이러한 결과는 근로자 중심의 경영활동이 은행지주회사의 수익성을 악화시킬 수 있다는 것을 시사한다. 본 연구는 표본기간이 다소 짧은 한계가 있으며, 향후 은행지주회사의 소유구조가 경영활동 전반에 미치는 영향을 분석하기 위해 이사회 구성이나 경영진 의사결정에 미치는 영향을 분석해보는 것도 좋은 연구과제가 될 것으로 보인다. 핵심어: 은행지주회사, 소유구조, 경영성과, 패널분석, 임의효과모형 □ 접수일: 2022년 1월 30일, 수정일: 2022년 2월 10일, 게재확정일: 2022년 2월 20일* 국립순천대학교 경제학과 조교수(Professor, Sunchon Univ., Email: dhcho@scnu.ac.kr) The Impact of Ownership Structure on Firm Performancein Bank Holding CompaniesDaehyoung Cho Abstract: Domestic bank holding companies are characterized by dispersed share ownership and the lack of controlling shareholders because they are under strict ownership regulations of the Financial Holding Companies Act. However, the major shareholders’ composition and total shareholding ratio widely vary across these companies. In that regard, this study examines how the ownership structure of the domestic bank holding companies affects their business performance. The analysis of panel data with a random effect model reveals that major shareholder ratio, foreign ownership, government ownership, the share of National Pension Service, and the share of employee’s stock ownership association have some influences on the business performance and risk for bank holding companies. In particular, the impact of the employee’s stock ownership association on the profitability of the bank holding companies is prominent. It suggests that the worker-oriented management activities would jeopardize the performance of these companies. This study has a limitation of short sample periods. To understand the influence of the bank holding companies’ ownership structure on overall management activities, focusing on the board composition or management decision-making could provide good future research topics. Key Words: Bank Holding Company, Ownership Structure, Firm Performance, Panel Analysis, Random Effect Model
조대형 한국전기전자재료학회 1997 電氣電子材料學會誌 Vol.10 No.10
For melt-spun Fe-Nd-C alloy variation of phase development and magnetic properties with the variety of small Al addition was investigated. As the amount of Al addition increased the amorphization of Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe was retarded and the residual Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe did not eliminated after heat treatment resulting in poor coercivities of the ribbons. The grain size of Fe$_{14}$/Nd$_{2}$/C increased with the increase of Al addition and the abnormal grain was often found out in the ribbon heat treated for more then 10 min. The enhancement of coercivity was the highest with the addition of 0.5at%Al. As the amount of Al addition increase the coercivities dropped rapidly. The highest coercivity obtained so far is 13.9kOe which about 16% higher than that(11.2kOe) obtained from the Al-free specimen.
조대형 한국산업경제학회 2015 한국산업경제학회 정기학술발표대회 논문집 Vol.2015 No.05
본 연구의 목적은 최근 청년실업률 문제가 지속되는 상황에서 정부의 경제활성화 정책이 고용창출에 효과가 있는지 여부를 오쿤의 법칙(Okun’s law)을 이용하여 정책적 시사점을 살펴보는 것이다. 이를 위해 차분모형(Difference version)과 다이내믹모형(Dynamic version)을 이용하여 경제성장률과 전체실업률 그리고 청년실업률 간 관계의 강건성(robustness)을 분석하였으며 연구결과는 다음과 같다. 첫째, 차분모형으로 오쿤의 법칙을 분석한 결과 전체실업률과 청년실업률 모두 오쿤의 법칙이 성립하였으며 특히, 전체실업률보다 청년실업률과 경제성장률 간에 오쿤의 법칙이 강하게 나타났다. 둘째, 이동회귀분석(rolling regression)을 이용하여 차분모형의 시변하는(time varying) 오쿤 계수를 추정한 결과, 글로벌 금융위기 이후 경제성장률과 실업률 간의 관계가 약화되고 있다는 것을 발견하였다. 셋째, 구조변화(structural change)를 고려한 다이내믹모형 분석결과는 각 기간별로 현재 실업률에 현재 경제성장률, 1분기전 경제성장률, 2분기전 경제성장률이 상이하게 영향을 미치는 것으로 나타났다. 하지만, 실업률과 경제성장률의 관계의 정도를 보여주는 오쿤 계수의 크기는 기간별로 큰 차이가 없었다. 이러한 결과는 한국의 경제성장과 실업률 간에 동시관계(contemporaneous correlation)를 가정하면 오쿤의 법칙이 최근 약화되고 있다고 볼 수 있지만, 구조변화 등 동적관계를 고려하면 여전히 시차를 두고 경제성장률이 실업률에 영향을 미치고 있어 오쿤의 법칙이 유효하다는 것을 확인하였다.
304 스테인리스강 용접금속의 열처리에 따른 응력부식균열
조대형,김형래,남태운 ( D . H . Cho,H . R . Kim,T . W . Nam ) 한국열처리공학회 1996 熱處理工學會誌 Vol.9 No.1
Austenite stainless steel was produced by arc welding with current 650A, voltage 50V and welding speed 10㎝/min. It was post-welded and then heat treated at 1,050℃ for 120min. And then it was immersed in water or in air. The microstructural changes, ferrite contents, mechanical properties, and stress corrosion cracking(SCC) were investigated. The SCC was studied in 42wt% boiling MgCl₂(140℃) under the constant stress using SCC elongation curve. The results showed that; 1. The as-welded spedimen seemed to increase δ-ferrite content largely, and revealed continuous network of lathy and vermicular type. The post-welded heat treatment changed the morphologies of ferrite from continuous type to island type. 2. The as-welded, air and water quenched specimens had the δ-ferrite content 9.7%, 3.2% and 2.1% respectively. We also showed that ferrite was Cr-rich and Ni-poor by EPMA. 3. The time of failure on the SCC was measured and it was used for corrosion elongation curve. The condition of SCC was investigated under 35㎏f/㎟ load and the results were as follows; 도표 4. The intergranullar cracking by stress corrosion was most distinct in weld metal while the transgranular cracking occurred in the air cooled specimen.