HVPE 법을 통한 GaN 성장 시 기판 종류 및 V/III 비에 따른 잔류 stress 특성 연구

이주형,이승훈,이희애,강효상,오누리,이성철,이성국,박재화,Lee, Joo Hyung,Lee, Seung Hoon,Lee, Hee Ae,Kang, Hyo Sang,Oh, Nuri,Yi, Sung Chul,Lee, Seong Kuk,Park, Jae Hwa 한국결정성장학회 2020 한국결정성장학회지 Vol.30 No.2

본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다. The characteristics of the residual stress on the types of the substrate was investigated with adjusting the V/III ratio during GaN growth via the HVPE method. GaN single crystal layers were grown on a sapphire substrate and a GaN template under the conditions of V/III ratio 5, 10, and 15, respectively. During GaN growth, multiple hexagonal pits in GaN single crystal were differently revealed in accordance with growth condition and substrate type, and their distribution and depth were measured via optical microscopy(OM) and white light interferometry(WLI). As a result, it was confirmed that the distribution area and depth of hexagonal pit tended to increase as the V/III ratio increased. Moreover, it was found that the residual stress in GaN single crystal decreased as the distribution area and depth of the pit increased through measuring micro Raman spectrophotometer. In the case of GaN growth according to substrate type, the GaN on GaN template showed lower residual stress than the GaN grown on sapphire substrate.

이미지 데이터를 모니터링하는 관리도에서 이미지와 ROI 크기 조정의 영향

이주형,윤형욱,이성민,이재헌,Lee, JuHyoung,Yoon, Hyeonguk,Lee, Sungmin,Lee, Jaeheon 한국통계학회 2017 응용통계연구 Vol.30 No.3

A machine vision system (MVS) is a computer system that utilizes one or more image-capturing devices to provide image data for analysis and interpretation. Recently there have been a number of industrial- and medical-device applications where control charts have been proposed for use with image data. The use of image-based control charting is somewhat different from traditional control charting applications, and these differences can be attributed to several factors, such as the type of data monitored and how the control charts are applied. In this paper, we investigate the adjustment effect of image size and region of interest (ROI) size, when we use control charts to monitor grayscale image data in industry. 최근 산업의 생산공정에서는 머신비전시스템을 통하여 제품의 품질특성치에 대한 정보를 이미지 데이터로 제공하는 경우가 많다. 따라서 산업과 의학 현장에서 이미지 데이터의 모니터링을 위해 관리도 절차의 필요성이 많이 대두되고 있다. 이미지 데이터를 모니터링하는 관리도 절차는 전통적으로 사용하는 관리도 절차와 유사한 점도 있지만, 데이터의 구조를 비롯하여 각 이미지에서 ROI를 설정하여 관리도 절차를 적용하는 등 서로 다른 점도 많이 있다. 이 논문에서는 생산공정에서 제공되는 이미지 데이터에 대해 관리도를 사용하는 절차를 소개하고, 이미지 또는 ROI 크기의 확대와 축소가 제품의 이상원인을 탐지하는데 어떠한 영향이 주는지를 모의실험을 통하여 알아보았고 각 관리도의 성능 또한 비교하였다.

퍼스컴에 의한 LAN의 구축과 OA의 전개

이주형,Lee, Ju-Hyeong 한국전자정보통신산업진흥회 1984 電子振興 Vol.4 No.4

주택규모 선택에 영향을 미치는 가구원수별 특성에 관한 연구

이주형,임종현,강남훈,Lee, Joo-Hyung,Lim, Jong-Hyun,Kang, Nam-Hoon 한국주거학회 2010 한국주거학회 논문집 Vol.21 No.2

The housing market requires customized housing to be supplied according to the various characteristics of households. Multinominal Logistic Regression was used to analyze the effects of variables of household characteristics according to the number of family members on the choice of housing size in the scope of the whole country's housing market. Analysis showed that the number of family members has its own characteristics. When a household has a smaller number of family members, there are more variables affecting choice of housing size. Living and housing expenses variables served as significant variables that affect all household types. Results showed that households with more living and housing expenses are more likely to choose a large sized house and where households have a greater number of family members, there is more influence on that choice. The age of the householder was only found to be a meaningful variable in 1-2 person households and 3-4 person households, particularly in the choice of a small or large sized house. This shows that the age of the householder does not play an important role in choosing medium sized houses for households of under 4 people, but affects the choice of small and large sized houses. The academic ability of household members also served as a significant variable. While 1-2 person households with high academic ability tend to select a large sized house, 3-4 person households with high academic ability tend to select a small sized house. It is observed that members of both 1-2 person households and 3-4 person households tend to select their house between a large sized house and a small sized house in order to own their own houses. The result of this research suggests that there are various and detailed variables on the choice of housing size. Especially, a notable result is that household characteristics more significantly affect the housing size choice of 1-2 person households, while the trend of an aging society will more significantly affect a 3-4 person households' choice of a large sized house. Therefore, a study on the choice of housing size according to characteristics of elderly households and 1-2 person households should be continually analyzed.

3차원 PCB 채널내에서의 복사-혼합대류 열전달 특성

이주형,박경우,박희용,Lee, J.H.,Park, K.W.,Pak, H.Y. 대한설비공학회 1996 설비공학 논문집 Vol.8 No.4

The interaction of turbulent mixed convection and surface radiation in a three-dimensional channel with the heated blocks is analyzed numerically. Two blocks are maintained at high temperature and the other bottom and horizontal walls are insulated. S-4 method is employed to calculate the effect of the radiative heat transfer. The low Reynolds number k-$\varepsilon$ model proposed by Launder and Sharma is used to estimate the turbulent influence on the heat transfer enhancement. From above modeling, the effects of various channel specifications on the flow and heat transfer characteristics are investigated. The variables used for the present study are Reynolds number, block spacing, the channel height spacing for block and the emissivity. Average Nusselt numbers along the block surfaces are correlated and presented in terms of Reynolds number, emissivity and dimensionless geometric parameters. For the range of conditions in this study, average Nusselt numbers along the block surfaces are strongly influenced by the Reynolds numbers and channel height spacing for block but weakly influenced by the block spacing and the emissivity of the adiabatic walls.

극소수 샘플에서 유의발현 유전자 탐색에 사용되는 순열에 근거한 검정법

이주형,송혜향,Lee, Ju-Hyoung,Song, Hae-Hiang 한국통계학회 2009 응용통계연구 Vol.22 No.5

마이크로어레이 극소수 샘플(array) 자료의 분석에서는 유의한 발현수치를 나타내는 유전자를 검정통계량에 의해 결정하는 것이 주요과제이다. 이 때 수 천 또는 수 만개인 유전자의 발현수치로부터 귀무분포(null distribution)의 생성이 필수적이며, 극소수 샘플 자료의 경우에는 순열방법(permutation methods)에 의해 귀무분포를 생성하는 것이 가장 바람직하다. 본 논문에서는 귀무분포 생성에 사용될 수 있는 매우 단순한 검정통계량을 제시하면서 더불어 귀무분포 생성에 적절한 순열방법도 제안한다. 모의실험으로 기존의 검정통계량으로 생성된 귀무분포와 본 논문에서 제안하는 검정통계량의 귀무분포를 비교하며, 실제 자료에 적용하여 유의 유전자를 탐색한다. In the analysis of microarray data with a small number of arrays, the most important task is the detection of differentially expressed genes by a significance test. For this purpose, one needs to construct a null distribution based on a large number of genes and one of the best way for constructing the null distribution for a small number of arrays is by means of permutation methods. In this paper we propose simple test statistics and permutation methods that are appropriate in constructing the null distribution. In a simulation study, we compare the null distributions generated by the proposed test statistics and permutation methods with the previous ones. With an example microarray data, differentially expressed genes are determined by applying these methods.

항공온실가스 배출현황 및 감축규제 대응방안

이주형,김원호,김용석,최성원,Lee, Juhyoung,kim, Wonho,Kim, Yongseok,Choi, Sungwon 한국항공운항학회 2016 한국항공운항학회지 Vol.24 No.1

Global aviation is projected to grow in demand by an annual average of 4.1% between 2014 and 2034. It can be said that environmental impact from aviation will therefore be expected to increase on a similar scale. As regards civil aviation emissions, the sector contributes between 2~3% to International aviation GHG emissions. In the European Union(EU), aviation emissions account for about 3% of the EU's total green house gas emissions, of which a majority are said to come from international flights. In terms of traffic volume in 2013, Korea's international aviation industry 11th with regard to passengers and 3rd with regard to cargo, attaining the overall rank of 5th in the world. GHG emissions has been increasing steadily over the last 4 years, averaging 3.9 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. As for aviation in Korea, there are a number of means intended to attain the Government's emission control objective in an efficient manner, such as AVA (Agreement of Voluntary Activity), TMS (Target Management System) and ETS (Emission Trading Scheme). In addition, the Government intends to better adapt to ICAO's Global MBM(Market-based Measures) that will come into performance on Year 2020. In the study, we focused on GHG mitigation measures that is fulfilling the AVA, TMS, ETS in the Government and suggest the effective measures to reduction the aviation GHG emissions.

노후 콘크리트 구조물의 실용적 유지관리를 위한 콘크리트 구조물 안전진단 지침 분석

이주형,조재열,Lee, Joo-Hyung,Cho, Jae-Yeol 한국토지주택공사 토지주택연구원 2020 LHI journal of land, housing, and urban affairs Vol.11 No.3

In South Korea, problems caused by material deterioration of time-worn concrete structures have been increased recently. Because severe material deterioration could damage the structure's safety, it's important to evaluate the old structure's condition and structural capacity regularly to keep its proper performance. The safety evaluation of concrete structures has been initiated and performed periodically since 1995 according to a guideline in accordance with a law in Korea. The guideline prescribes the evaluation types, intervals and methods of the target structure. A lot of cost and labor have been invested every year to carry out the regular safety evaluation. However, it's not clear that the current manual could inspect the old structure's condition and assess the structural capacity precisely. Thus, the verification study initiated to figure out the Korean safety evaluation manual's practicalness. First, the Korean manual was analyzed and then compared with that of other countries for concrete bridges which are representative concrete structure. After that, the previously written evaluation reports were collected and analyzed to find out how the safety evaluation has been carried out. Based on the study results, the parts requiring verification of the manual were drawn. A research program is in progress in order to verify the parts by performing tests with actual structural members from decommissioned concrete bridges.

집합주거단지의 옥외공간과 녹지시설

이주형,Lee, Ju-Hyeong 대한건축사협회 1991 建築士 Vol.1991 No.11

고령 환자의 기존 의치를 치과기공소에서 수리한 증례

이주형,Gyu-Heon Lee 대한치과기공학회 2022 대한치과기공학회지 Vol.44 No.4

The need for repairing removable dentures has grown as the population had aged. The di-rect methods allow existing dentures to be repaired without interrupting their use. However, if patient compliance is low, direct methods may be challenging. Moreover, attaching an ar-tificial tooth to a metal base is a complicated procedure because it necessitates casting a retentive element and soldering it to a metal base. This clinical report describes how to add an artificial tooth to a metal base, reline denture bases, and reestablish occlusion on re-lined removable dentures using indirect methods. Existing removable dentures were suc-cessfully repaired and their service life was efficiently extended using the methods de-scribed.