Validations of a Numerical Model of Solute Transport in a Snowpack

이정훈,Lee, Jeonghoon The Korean Society of Economic and Environmental G 2012 자원환경지질 Vol.45 No.5

겨울철동안 쌓여 봄에 놓은 눈 녹은 물(snowmelt), 즉 융설의 유출은 북반구 및 산간지역에서 매우 중요한 것으로 여겨지고 있다. 이러한 지역에서 융설로 인한 유동 및 이온의 이동에 대한 이해는 매우 중요하며 전세계적으로 꾸준하게 연구되고 있다. Lee et al. (2008a)와 Lee et al. (2008b)연구에서는 대기로부터 수송된 이온 및 오염원이 융설에 의해 눈속을 이동하는 것을 모사하기 위한 Mobile-Immobile water Model (MIM)을 개발하였다. 이 연구에 사용된 모델을 검증하기 위해서 물질수지계산(mass balance calculation) 및 해석해(analytical solution)를 이용한 모델결과와의 비교를 수행하였다. 일정시간동안 눈 속에서의 물질의 질량변화는 눈 표면에서 들어온 물질과 눈 기저부에서 빠져나간 물질의 질량 차이와 같아야한다는 사실을 이용하여 물질수지를 계산하였다. 파면(wave front)의 이동속도 및 기존문헌에서 알려진 해석 해를 이용하여 모델결과와의 비교도 시도하였다. 모델의 물질수지계산결과 질량 차이가 거의 발생하지 않았으며 모델결과와 해석해와의 비교 역시 두 결과가 거의 일치하였다. Snowmelt from seasonal snow covers can be significant in many environments of northern and alpine areas. Water flow and chemical transport resulting from snowmelt have been studied for an understanding of contributions to watersheds or catchments. A Mobile-Immobile water Model (MIM) was developed to describe the movement of ionic tracers through a snowpack by Lee et al. (2008a) and Lee et al. (2008b). To validate the model used in the studies, mass balance calculations of the model were conducted and comparisons were made between model results and analytical solutions in this work. Mass balance was calculated based on the fact that change in total mass within a snowpack with time is equal to sum of any change in the flux of water or ionic tracers into and out of the snowpack. Calculations of both water and ionic mass show almost perfect agreement between changes of two water and solute mass fluxes. Comparisons between model results and analytical solutions including wave velocity and effective saturation show almost perfect agreement.

홀로그래픽 고분자 분산 액정을 이용한 홀로그램 이중 초점 렌즈 제작

이정훈,성기영,이상조,김기현,조영걸,곽종훈,송재봉,이윤우,Lee, Jung-Hoon,Sung, Gee-Young,Lee, Sang-Jo,Kim, Ki-Hyun,Joh, Young-Gul,Kwak, Chong-Hoon,Song, Jae-Bong,Lee, Yun-Woo 한국광학회 2003 한국광학회지 Vol.14 No.2

다기능성 아크릴레이트 단량체와 네마틱 액정 등을 혼합한 홀로그래픽 고분자 분산 액정 박막을 제작하고 액정의 농도와 피부에서 인가한 교류 전기장 등에 대한 실시간 회절효율을 측정하였다. WPDLC 박막에 기록된 홀로그램은 적절한 교류 전기장의 on/off에 의해 가역적으로 소거와 재생이 가능함을 보였다. 이러한 전기광학 특성을 이용하여 30 cm와 40 cm의 이중초점을 갖는 홀로그램 렌즈를 제작하였다. We Have fabricated a holographic polymer-dispersed liquid crystal (HPDLC) thin film, which is composed of multifunctional acrylate monomer blended with the nematic liquid crystal mixture, and then investigated the real-time diffraction efficiencies for various amounts of liquid crystals and applied AC electric fields. It is experimentally shown that the holographic gratings recorded in the HPDLC film can be reversibly erased and reconstructed by switching on and off an appropriate applied AC electric field. By use of these electro-optic properties we have developed bifocal holographic lenses having two different focal lengths of 30cm and 40 cm.

추정된 일회심박출량을 이용한 수면 무호흡 검출

이정훈,이전,이효기,이경중,Lee, Junghun,Lee, Jeon,Lee, Hyo-Ki,Lee, Kyoung-Joung 대한의용생체공학회 2013 의공학회지 Vol.34 No.2

This paper proposes a new algorithm for sleep apnea detection based on stroke volume. It is very important to detect sleep apnea since it is a common and serious sleep-disordered breathing (SDB). In the previous studies, methods for sleep apnea detection using heart rate variability, airflow and blood oxygen saturation, tracheal sound have been proposed, but a method using stroke volume has not been studied. The proposed algorithm consists of detection of characteristic points in continuous blood pressure signal, estimation of stroke volume and detection of sleep apnea. To evaluate the performance of algorithm, the MIT-BIH Polysomnographic Database provided by Phsio- Net was used. As a result, the sensitivity of 85.99%, the specificity of 72.69%, and the accuracy of 84.34%, on the average were obtained. The proposed method showed comparable or higher performance compared with previous methods.

활동기준원가계산법(Actvitiy-Based Costing)에 의한 모듈러 건축물 공장제작단계 간접비 산정 방안

이정훈,박문서,이현수,이광표,현호상,Lee, JeongHoon,Park, Moonseo,Lee, Hyun-Soo,Lee, Kwang-Pyo,Hyun, Hosang 한국건설관리학회 2015 한국건설관리학회 논문집 Vol.16 No.4

최근 건설 기업들은 노동력 부족, 원자재값 상승, 건설경기 위축 등으로 인해 새로운 건설시장 개척 및 자동화 기술도입을 적극적으로 추진하고 있다. 이러한 노력의 일환으로 최근 제조업의 생산프로세스와 건설생산프로세스가 결합된 모듈러 건축공법이 부각되고 있으며 이와 관련된 연구가 활발히 진행되고 있다. 모듈러 건축프로세스에서 공장제작의 가장 큰 장점 중 하나는 기존 건축프로세스에서 사용하기 어려웠던 제조업의 생산설비시스템을 활용한 생산원가(공사원감)절감이 가능하다는 것 있다. 이를 뒷받침하기 위해서는 대다수의 건축공종이 집중되어있는 공장제작단계에서의 원가산정이 정확해야 하며 특히 직접적인 계산이 어려운 간접비에 대한 구체적인 산정방인 필요하다. 그러나 국내 모듈러 건축산업이 시장도입단계로 이와 관련된 연구가 한정적으로 이루어지고 있어 모듈러 건축물의 원가왜곡현상이 나타날 수 있는 문제가 있다. 따라서 본 연구는 모듈러 건축물의 공장제작단계에서 국내계약법상에서 명시된 제조업과 건설업에서의 간접비 정의를 고찰하고 활동기준원가계산법을 통해 모듈러 건축물을 구성하는 모듈러 유닛별 간접비 산정방식을 제시하였다. 본 연구는 공장제작단계에서의 전 과정 뿐만 아니라 모듈러 건축물의 설계, 제작, 운송, 시공의 간접비 배분에 대한 기초자료로서 활용될 수 있으며 향후 모듈러 건축물의 공장제작단계에서의 원가산정 정확도 향상 및 모듈러 건축물의 전 생애주기에 따른 원가산정방안 마련에 기여할 것으로 기대된다. Modular construction is combined with manufacturing production process and conventional construction industry technique. Considering characteristic of modular construction production process, manufacturing facilities require indirect costs for utilities, equipment, and overall maintenance, which can affect modular units pricing. However, current modular construction cost classification is inadvertent to reflect the manufacturing overhead costs, because it is generally added as a percentage to sum of labor, material and equipment as it called in single cost pool used. This process is easy to estimate the total construction cost at the project starting points, but it brings on misunderstanding of project profit estimations by "cross subsidization phenomenon". To prevent this situation, in this research aims to provide modular construction overhead cost handling process at the detailed indirect cost calculation for manufacturing stage using Activity-Based Costing as one of the powerful method for overhead costs estimation and allocation. Using this research results, modular construction cost estimators have more detailed cost information of modular units and prevent to misallocate indirect costs. Also, it can be utilized to aid the understanding of the company's profit structure.

등줄쥐 (Apodemus agrarius coreae)의 부고환관의 무섬모상피세포와 섬모상피세포의 미세구조에 대한 비교 연구

이정훈,Lee, Jung-Hun 한국현미경학회 1998 Applied microscopy Vol.28 No.3

In order to the comparative morphological study of the non-ciliated and ciliated epithelial cells, and to elucidate the process of degeneration of non-ciliated epithelial cell of the ductus epididymidis, Korean striped field mouse, Apodemus agrarius coreae was examined with light and transmission electron microscopes. The morphological characteristics of non-ciliated epithelial cell, the cell types of the caput epididymidis (Cp), corpus epididymidis (Cr) and cauda epididymidis (Cu) were long-columnar, short-columnar and short-cuboudal, respectively. The mitochondria and rough endoplasmic reticulum tended to be broken as they immigrated from Cp to the Cu. The Golgi acted vigorously at the Cp, but the Golgi was inactive in Cr and Cu. The secretory vesicles and lysosomes were increased gradually from Cp to the Cu. The process of degeneration of the non-ciliated epithelial cells observed in the Cp, Cr and Cu epididymidis. The increase of the non-ciliated epithelial cells, and its degeneration were observed more often from Cp to the Cu. The morphological characteristics of the ciliated epithelial cells, the cell types of the Cp, Cr and Cu were long-columnar, short-columnar and short-cuboudal, respecptively like the non-ciliated epithelial cells. The stereocilia was long and slender at the Cp and Cr, while Cu was very short. The pinocytotic vesicles and absorptive vesicles were increased from the Cp to the Cu. Numerous disintergrated products was existed at the Cr including the Cp, but Cu were not observed. A significant amount of lysosomes existed at the Cp and Cr epithelial cells, but they were not observed in Cu epithelial cells.

신경망 알고리즘을 이용한 화력발전 보일러 시스템 시뮬레이터 개발

이정훈,Lee, Jung Hoon 한국시뮬레이션학회 2020 한국시뮬레이션학회 논문지 Vol.29 No.3

대규모 화력 발전소 제어용 시뮬레이터 개발은 급수/증기 계통, 공기/연소가스 계통, 미분탄 계통 및 터빈/발전기 계통으로 구성되며, 기계적인 터빈/발전기를 제외하고 모든 계통에 대하여 모델링이 가능하다. 현재까지 화력발전의 일부 계통에 대한 신경망 시뮬레이터 개발에 대한 시도는 있었으나 전체 계통에 대한 시뮬레이터 개발은 완성된 적이 없다. 특히 모든 발전사의 핵심 기술 개발중 하나인 오토튜닝은 정확도가 높은 모든 계통에 대한 모델링이 완성되어야 이룰 수 있는 기술이다. 이에 본 논문은 신경망 알고리즘을 이용하여 시스템을 설계할 경우 가장 핵심인 입출력 관계에 대한 변수를 모든 계통에 대하여 정의하였다. 시뮬레이션을 수행한 결과 실제 보일러 계통의 95~99% 이상 정확도를 보임에 따라 본 시뮬레이터에 현장 PID 제어기를 결합할 경우 고장진단이나 오토튜닝에 활용 가능할 것이다. The development of a large-scale thermal power plant control simulator consists of water/steam systems, air/combustion systems, pulverizer systems and turbine/generator systems. Modeling is possible for all systems except mechanical turbines/generators. Currently, there have been attempts to develop neural network simulators for some systems of a boiler, but the development of simulator for the whole system has never been completed. In particular, autoTuning, one of the key technology developments of all power generation companies, is a technology that can be achieved only when modeling for all systems with high accuracy is completed. The simulation results show accuracy of 95 to 99% or more of the actual boiler system, so if the field PID controller is fitted to this simulator, it will be available for fault diagnosis or auto-tuning.

한국산 관박쥐 (Rhinolophus ferrumequinum korai)에 있어서의 정자변태

이정훈,최병진,손성원,Lee, Jung-Hun,Choi, Byung-Jin,Son, Sung-Won 한국현미경학회 1992 Applied microscopy Vol.22 No.2

In order to study process of spermiogenesis of the Korean greater horseshoe bat, Rhinolophus ferrumequinum korai, the cycle of seminiferous epithelium was examined by the light and electron microscope and the following results were obtained based on the epithelial cell differentiation. 1. Spermiogenesis occurred from early July to mid-Octber, and spermatogenic activity was vigorous from mid-August to late September. Spermatocytes including spermatogonia were found to be degenerated in only July. It is deduced that the degeneration serves as the mechanism to regulate effective use of energy to prepare for mating and hibernating periods, and regulation of breeding cycle. 2. Spermiogenesis of the Korean greater horseshoe bat was divided according to differentiation of the cell structure, into Golgi, cap, acrosome, maturation and spermiation phases; Golgi, cap and spermiation phases were further divided into two steps of early and late phase respectively, and acrosome phase into three steps of early, mid and late phases, and maturation phase has only one step. Hence, the spermiogenesis consists of ten phases. The first research was done in this article on the changes of chromatin with nucleus, the time of appearance and disappearance of chromatin granules, in case of Korean greater horseshoe bat (Rhinolophus ferrumequinum korai). Chromatin granule began to be condensed in late Golgi and the condensation proceeded to form an irregular mass of a electron-dense chromatin in a form of circular cylinder in the center of nucleus at the phase of maturation. Finally, the chromatin condensation proceeded and perfect nucleus of sperm with homogeneous density was formed when the sperm was separated from Sertoli cell. Therefore, appearance and disappearance of chromatin granules occurred in the period of time between late Golgi and maturation phase, The tail of sperm began to develop in early cap phase, Numerous lipid droplets were obseved in the cytoplasm of spermatids during the maturation phase, which seemed to be used as energy source necessary to make mature sperm during spermiogenesis.

동면기 동안에 한국산 관박쥐 (Rhinolophus ferrumequinum korai) 자성 생식도관 내의 정자저장과 소멸

이정훈,손성원,Lee, Jung-Hun,Son, Sung-Won 한국현미경학회 2000 Applied microscopy Vol.30 No.1

동면기 (11월부터 3월까지) 동안의 한국산 관박쥐(Rhinolophus ferrumequinum korai) 자성 생식도관 내의 정자저장, 정자 생존 여부 및 정자이동을 알아보기 위하여 전자현미경으로 관찰한 결과는 다음과 같았다. (1) 자궁내강, 자궁선내의 정자들은 다수의 백혈구들에 의해 포식되고 소멸되었다. (2)정자들은 수란관 미측 협부에서만 저장되었고, 정자들의 두부는 상피세포쪽을 향하고 있었다. 이는 교미기(10월 초-중순경)에 사출된 정자들이 긴 동면기 동안에 수란관 미측 협부에서만 생존 가능함을 의미하며, 수란관의 미측 협부가 정자의 수정능 획득(capacitation)에 필요한 최적의 장소임을 의미한다. (3) 동면후기인 3월의 수란관 미측협부에는 정자들이 관찰되지 않았다. 이는 배란기인 4월에 난자를 만나기 위해 정자들이 수정부위인 팽대부 쪽으로 이행하였음을 의미한다. 이상의 결과로 미루어 보아, 긴 동면기 동안의 자성 생식도관 내에서의 정자의 장기저장과 생존여부 및 정자이동은 수정을 위한 일종의 mechanism이라 여겨진다. This study was carried out to investigate sperm storage, and the fate of spermatozoa in the female reproductive tract during hibernation in Korean greater horseshoe bat, Rhinolophus ferrumequinum korai. (1) Numerous sperm occurring in uterine lumen and glands were engulfed, and disappeared by the polymorphouclear leucocytes during the hibernation. (2) The stored sperm present in caudal isthmus of oviduct only, the heads of sperm toward the oviductal epithelial cells. Therefore, the projected sperm during the mating season are only alive in the caudal isthmus of oviduct in the long hibernation. The present result suggests that the caudal isthmus of oviduct may play an important role as the principal storage site in capacitation of sperm. (3) In March, the sperm do not occur in the caudal isthmus of oviduct. It suggests that the stored sperm in the caudal isthmus of oviduct should migrate to the ampulla of the site of fertilization to meet ovum in the period of ovulation. The results of this experiment consider that prolonged sperm storage, fate of sperm and sperm migration in the long hibernation have a kind of mechanism for the fertilization.

발치된 치아에 부착된 수복물의 변연 적합 및 형태

이정훈,최민호,김민호,강동완,Lee, Jeong-Hoon,Choi, Min-Ho,Kim, Min-Ho,Kang, Dong-Wan 대한턱관절교합학회 2002 구강회복응용과학지 Vol.16 No.3

The purpose of the present study was to evaluate the marginal discrepancy and topography of artificial crown on teeth extracted due to severe periodontal disease. Twenty specimens were invested into metamethylacrylate resin and cutted into vertical slices along with the long axis of tooth. The selected marginal discrepancy between the outer edge of the crown and the finishing line of abutment was examined by stereo- microscope(Olympus, PM-VSP-3, Japan) at magnification of up to 10, and the topography of finishing margin on crown was observed by stereomicroscopeat magnification of up to $70{\times}$. The results were as follows. (1) The mean marginal discrepancy between extracted tooth and artificial crown were $50.82{\mu}m$. (2) There was a considerable difference in the microstructure of finishing margins among specimens. Microscopic Structure on finishing margin showed indefinite line, poor fit (open, underextended and overextended), distorted margin, and surface roughness. This study suggested that there could be necessary to consider the response of periodontium to the emergence profile of natural tooth and precision of marginal geometry while establishing treatment planning for the reconsruction of the artificial crown.

솔젤법에 의해 제조한 PZT(52/48) 막의 두께에 따른 우선배향성의 변화 및 이에 따른 압전 및 전기적 물성의 변화 평가

이정훈,김태송,윤기현,Lee, Jeong-Hoon,Kim, Tae-Song,Yoon, Ki-Hyun 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.10

MEMS 소자에의 응용을 위한 PZT(52/48) 박막을 diol을 용매로한 솔젤법에 의해 제조하였으며 미세구조에 따른 전기적 특성 및 압전 특성 관계를 고찰하였다. 0.5 mol 의 sol을 제작하여 1회 코팅시 $0.2{\mu}m$ 두께를 갖는 균열 없는 박막을 얻을 수 있었으며 $0.2{\mu}m$에서 $3.8{\mu}m$의 두께의 막을 증착하였다. 미세구조사진으로부터 층간 porous한 영역이 관찰되지 않음과 제2상의 성장이 없는 치밀한 columnar입자 성장을 확인 할 수 있었으며 균열없는 치밀화된 입자의 성장으로부터 우수한 이력곡선을 얻을 수 있었다. XRD분석으로부터 우선 배향성을 알아본 결과 (111)우선 배향성이 $1{\mu}m$ 영역까지 우세하다가 $1{\mu}m$이상의 두께에서 점차 random하게 바뀌는 것을 확인할 수 있었으며, 유전 특성 및 압전특성의 경향도 이와 유사하게 $1{\mu}m$ 영역까지 증가하다가 그 이상의 두께에서는 수렴하여 각각 1400, 300 pC/N 정도의 우수한 값을 가졌다. Thickness dependence of orientation on piezoelectric and electrical properties was investigated by PZT (52/48) films by diol based sol-gel method. The thickness of each layer by spinning at one time was $0.2{\mu}m$ and crack-free films could be successfully deposited on 4 inches Pt/Ti/$SiO_2$/Si substrates by 0.5 mol solutions in the range from $0.2{\mu}m$ to $3.8{\mu}m$. Excellent P-E hysteresis curves were achieved, which were attributed to the well-densified PZT films and columnar grain without pores or any defects between interlayers. The (111) preferred orientation of films were shown in the range of thickness below $1{\mu}m$. As the thickness increased, the (111) preferred orientation disappeared from $1{\mu}m$ to $3{\mu}m$ region, and the orientation of films became random above $3{\mu}m$. Dielectric constants and longitudinal piezoelectric coefficient, $d_{33}$, measured by pneumatic method were saturated around the value of about 1400 and 300 pC/N respectively above the thickness of $1{\mu}m$.