http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
멀티 인터페이스 기반 무선 메쉬 네트워킹 기술 연구 동향
이성희,김민수,고영배,Lee, Seong-Hui,Kim, Min-Su,Go, Yeong-Bae 한국통신학회 2007 정보와 통신 Vol.24 No.5
무선 메쉬 네트워크(Wireless Mesh Network)는 무선으로 연결된 메쉬 라우터(Mesh Router)들 간에 멀티 홉 통신을 통해 다수의 사용자 단말에게 인터넷 접속 등의 서비스를 제공해줄 수 있는 망 기술로써, 네트워크 확장과 유지, 보수가 쉬운 장점이 있다. 무선 메쉬 네트워크를 통해 보다 많은 사용자와 트래픽을 처리하기 위해서는 네트워크의 용량(Capacity) 및 처리량(Throughput)을 높이는 것이 중요하며, 이를 위해 다수의 통신 인터페이스를 하나의 단말에 장비하는 멀티 인터페이스 기술이 각광받고 있다. 본 논문에서는 무선 메쉬 네트워크의 표준화 동향을 소개하고 멀티 인터페이스 기반 메쉬 네트워크 연구 활동 및 테스트 베드 구축 활동에 관해 요약한다.
경량콘크리트를 사용한 철선일체형 바닥구조의 휨내력 및 전단내력 실험적 평가
이성희,방중석,원용안,류재용,최성모,Lee, Seong-Hui,Bang, Jung-Seok,Won, Yong-An,Ryoo, Jae-Yong,Choi, Sung-Mo 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.3
최근 내진설계의 발달과 친환경 건설자재에 대한 관심으로 건물의 자중을 줄이기 위한 경량콘크리트에 대한 관심이 높아지고 있으며, 증축건물을 중심으로 경량콘크리트를 이용한 설계가 점차 증가하는 추세에 있다. 따라서 본 연구는 철선일체형 데크플레이트와 경량콘크리트를 사용한 바닥구조시스템의 휨내력과 전단내력을 평가하기 위해 하부 강판 플레이트의 설치유무를 변수로 4개의 실험체를 제작하여 구조실험을 수행하였다. 이를 통해 경량콘크리트를 이용한 합성바닥구조의 구조성능은 KCI(2007)의 설계기준을 만족하는 것으로 나타났다. A recent development of seismic design, which is required among environmentally friendly members, increased the concern on light-weight concrete. Extending around the building, the structural design which is applied for light-weight concrete has been increased. This study therefore evaluates the bending resistance and the shear resistance involved using four specimens that were manufactured and tested. The parameters used in this study exist. This study investigates the structural performance of composite slab using light-weight concrete with KCI (2007).
용접조립 각형 CFT 기둥-보 외다이아프램 접합부의 구조 거동
이성희,김영호,최성모,Lee, Seong Hui,Kim, Young Ho,Choi, Sung Mo 한국강구조학회 2016 韓國鋼構造學會 論文集 Vol.28 No.2
기존 콘크리트충전 각형강관(CFT) 구조에 사용하는 각형강관은 4개의 판을 용접하여 제작하는 박스칼럼이 일반적이다. 그러나 이러한 강관은 제작효율이 저하되며, 또한 기둥-보 접합부에는 내측 다이아프램과 관통 다이아프램을 용접하는데 특수한 용접기술이 필요하다. 따라서, 얇은 강판을 절곡하는 방식으로 응력집중 위치의 용접을 피하고, 단면효율이 극대화된 내부앵커 돌출형의 용접조립 각형강관을 개발하게 되었다. 용접조립 각형강관은 강관내부에 스티프너가 설치되어 내측 다이아프램과 관통 다이아프램과 간섭이 발생하게 되므로 본 연구에서는 용접조립 각형CFT 기둥-보 접합부로 외다이아프램형식을 채택하고 외다이아프램의 설계식을 제안하였으며, 기둥-보 접합부의 거동을 파악하기 위해 실대형 4개 실험체를 제작하여 구조거동 및 내력을 분석하였다. Existing tubes for concrete filled tubular structure are made through welding of four plates irrespective, but the production performance is poor and special welding technique is needed to weld the internal or through diaphragm. Accordingly, We developed a welded built-up square steel tube having a welding lines and a stiffeners at location out of stress concentration. The welded built-up square steel tube occurred a interference with stiffeners at the internal or through diaphragm, therefore researches of a external diaphragm for welded built-up square CFT column connections are needed for the purpose of avoidance of a interfere with stiffeners. In this study we suggest a design formulation for external diaphragm of the welded built-up square CFT external diaphragm connections. Four specimens were manufactured for a experimental test, then we analyzed the behaviors of the specimens.