제주도 현무암 골재를 활용한 중온 아스팔트 포장 적용에 관한 연구

안덕순,백철민 한국도로학회 2021 한국도로학회논문집 Vol.23 No.6

PURPOSES : The purpose of this study is to evaluate an asphalt mixture via field application to utilize basalt aggregates produced on Jeju Island for a warm mix asphalt (WMA). METHODS : Using commercially available WMA additives, an indoor experiment is conducted on low- and high-void aggregates among basalt aggregates on Jeju Island. The physical properties of the WMA mixture are evaluated using one solid type and two liquid types of WMA additive. To evaluate the applicability of the WMA additives, air void, saturation, aggregate void, Marshall stability, flow number, indirect tensile strength, and toughness tests are performed. For the field application of WMA using basalt aggregates, three types of pavements (HMA, WMA-Solid, and WMA-liquid) are constructed. When applying the pavements in the field, an anti-stripping agent is incorporated to improve the water resistance while considering the characteristics of the basalt aggregate. Samples are acquired via plant and field coring to evaluate the properties of the materials applied in the field. RESULTS : In the indoor test for analyzing the applicability of the commercialized WMA additives to basalt aggregates, all tests except the indirect tensile strength test show results that satisfy the standards. All test results, including that from the indirect tensile strength test, satisfy the standard values in the test that uses the sample material obtained from the plant. Similarly, in the test with field cores, all test results satisfy the standard values. Therefore, the experimental value in the field application is generally higher than the test value in the indoor experiment. It is inferred that this is due to the difference between the basalt aggregates used in the indoor and field experiments, as well as the addition of the anti-stripping agent. CONCLUSIONS : Basalt aggregates produced on Jeju Island can be used for WMA pavements, as demonstrated via indoor experiments and field applications. However, owing to the characteristics of basalt aggregates, a method for improving water resistance should be considered, and tests to determine the indirect tensile strength should be performed using various basalt aggregates. In addition, because various basalt aggregates exist owing to the diverse geology characteristics of Jeju Island, they should be evaluated via more experiments and field applications.

아스팔트 포장의 성능인자 허용한계에 관한 연구

안덕순,남정희,권수안 한국도로학회 2010 한국도로학회 학술발표회 논문집 Vol.2010 No.9

현장 계측자료를 이용한 포장체 온도예측모델 개발 연구

안덕순,박희문 한국도로학회 2004 한국도로학회 학술대회 발표논문 초록집 Vol.2004 No.10

투습도가 다른 포장조건이 건대추의 품질보존에 미치는 영향

안덕순,이동선 ( Duck Soon An,Dong Sun Lee ) 한국산업식품공학회 1997 산업 식품공학 Vol.1 No.3

원형 럼블스트립의 현장적용에 따른 소음특성 평가

안덕순,손현장,이재준,권수안 한국도로학회 2013 한국도로학회 학술대회 발표논문 초록집 Vol.2013 No.09

고속도로 영업소 진입로에는 운전자에게 주의환기를 주기 위해 횡방향 럼블스트립이 설치되어 있다. 이러한 럼블스트립은 대부분 직사각형 형상을 갖고 있다. 럼블스트립의 형상에 따라 소음의 특성이 다르게 나타나는 것으로 알려져 있다. 본 연구에서는 직사각형 형태의 럼블스트립을 원형의 럼블스트립으로 개선함에 따른 소음특성 변화에 대한 연구를 수행하였다. 서울외곽순환고속도로 영업소 광장에 개선된 원형 형상의 럼블스트립을 적용하고, 사후 모니터링을 실시하여 개선 전·후의 소음특성에 대해 분석하였다. 본 연구 결과, 럼블스트립의 개선 전·후 소음특성은 개선후의 교통량이 증가했음에도 소음은 감소하는 것을 알 수 있었다. 차량주행속도는 개선 전·후 모두 약 58km/h로 거의 유사하게 나타났다. 원형의 럼블 스트립이 직사각형 형상의 럼블스트립보다 시간대별로 약 1~3dB(A)의 소음저감 효과가 나타났다. 이런 현장적용의 결과를 볼 때, 횡방향 럼블스트립의 다양한 규격(럼블스트립의 간격, 깊이, 형상 등)에 대한 추가적인 연구를 진행하면 더 우수한 성능의 럼블스트립 규격을 개발할 수 있을 것으로 사료된다.

[P4-19] 감압포장이 딸기와 상추의 품질 보존에 미치는 영향

안덕순,박은영,이동선 한국식품영양과학회 2008 한국식품영양과학회 학술대회발표집 Vol.2008 No.10

능동형 소음저감 기법을 위한 도로교통소음 예측 모형 평가 연구

안덕순,문성호,안오성,김도완 한국도로학회 2015 한국도로학회논문집 Vol.17 No.6

PURPOSES: The purpose of this thesis is to evaluate the effectiveness of an active noise cancellation (ANC) system in reducing the traffic noise level against frequencies from the predictive model developed by previous research. The predictive model is based on ISO 9613-2 standards using the Noble close proximity (NCPX) method and the pass-by method. This means that the use of these standards is a powerful tool for analyzing the traffic noise level because of the strengths of these methods. Traffic noise analysis was performed based on digital signal processing (DSP) for detecting traffic noise with the pass-by method at the test site. METHODS : There are several analysis methods, which are generally divided into three different types, available to evaluate traffic noise predictive models. The first method uses the classification standard of 12 vehicle types. The second method is based on a standard of four vehicle types. The third method is founded on 5 types of vehicles, which are different from the types used by the second method. This means that the second method not only consolidates 12 vehicle types into only four types, but also that the results of the noise analysis of the total traffic volume are reflected in a comparison analysis of the three types of methods. The constant percent bandwidth (CPB) analysis was used to identify the properties of different frequencies in the frequency analysis. A-weighting was applied to the DSP and to the transformation process from analog to digital signal. The root mean squared error (RMSE) was applied to compare and evaluate the predictive model results of the three analysis methods. RESULTS: The result derived from the third method, based on the classification standard of 5 vehicle types, shows the smallest values of RMSE and max and min error. However, it does not have the reduction properties of a predictive model. To evaluate the predictive model of an ANC system, a reduction analysis of the total sound pressure level (TSPL), dB(A), was conducted. As a result, the analysis based on the third method has the smallest value of RMSE and max error. The effect of traffic noise reduction was the greatest value of the types of analysis in this research. CONCLUSIONS : From the results of the error analysis, the application method for categorizing vehicle types related to the 12-vehicle classification based on previous research is appropriate to the ANC system. However, the performance of a predictive model on an ANC system is up to a value of traffic noise reduction. By the same token, the most appropriate method that influences the maximum reduction effect is found in the third method of traffic analysis. This method has a value of traffic noise reduction of 31.28 dB(A). In conclusion, research for detecting the friction noise between a tire and the road surface for the 12 vehicle types needs to be conducted to authentically demonstrate an ANC system in the Republic of Korea.

성능기준 실용화를 위한 시범사업 구간의 현장조사

안덕순,남정희,권수안 한국도로학회 2008 한국도로학회 학술대회 발표논문 초록집 Vol.2008 No.10

콘크리트 재료의 열팽창계수 측정 장비에 대한 개발 연구

안덕순,남정희,권수안 한국도로학회 2007 한국도로학회 학술대회 발표논문 초록집 Vol.2007 No.10

개선된 럼블스트립의 현장적용에 따른 사후 소음특성 평가

안덕순,서영찬,손현장,이재준,엄병식 한국도로학회 2013 한국도로학회논문집 Vol.15 No.6

PURPOSES: This research investigates traffic noise characteristics as change the transverse rumble strips shape from rectangular to cylinder at toll plaza of highway. METHODS : The traffic noise was investigated at two different places at toll plaza of highway. One is modified grooving, another is employed cylinder shape of TRS instead of rectangular shape of TRS. A measurement of traffic noise was conducted at same location and time period. The traffic volume information was gotten from office of highway office and vehicle speed was measured by speed measuring device. The traffic noise measurement was conducted from 13:00 to 23:00 and by pass-by method. Also, the traffic noise was measured behind noise barrier. Various distance from noise barrier(7.5m, 30m, 50m) and different heights(1.2m, 3m, and 5m) were parameter for measurement of traffic noise in this study. RESULTS : The class 1 vehicle was contributed from traffic volume which was increased 1,500. However, the distribution of traffic speed didn’t change compare to previous investigated period. From this study, It was found that the external traffic noise was changed as function of geometric shape of TRS. The external noise from modified grooving was less than 1.2dB(A) of the current TRS. A difference of traffic noise was 20dB(A) before and after barrier. It came from a noise barrier effect as reduction of traffic noise. According to investigate a traffic noise distribution near barrier, there is similar noise characteristic as function of height at 7.5m distance from noise barrier. Also, There is no different traffic noise between 30m and 50m from source of the noise of sound barrier. CONCLUSIONS: Based on this traffic noise investigation result, there is a clear characteristic difference as changed TRS shape. The traffic noise was reduced by changed TRS shape. Specially, traffic noise was decreased although the traffic volume was increase for same investigation time and period. It is implied that cylinder type of TRS significantly reduces the traffic noise. The specification of various TRS will be studied in the future.