http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신현익,송현종,김명수,임연수,이재춘 한국세라믹학회 2000 한국세라믹학회지 Vol.37 No.4
Carbon nanofibers with an average diameter of 100nm were reacted with SiO vapor generated from a mixture of Si and SiO2 to produce silicon carbide nanofibers at temperature ranging 1200∼1500$^{\circ}C$ under vacuum. The nanofiber reacted at 1200$^{\circ}C$ for two hours consisted of silicon carbide with an average crystallite size of 10-20nm, amorphous silica and a significant amount of unreacted carbon. The surface area of silicon carbide nanofiber, obtained after removal of amorphous silica and unreacted carbon from converted carbon nanofibers at 1200$^{\circ}C$, was as high as 150㎡/g. With increasing reaction temperature to 1500$^{\circ}C$, the surface area was decreased to 14㎡/g. Growth of SiC crystallite size with increasing conversion temperature of carbon nanofiber was confirmed from Scherrer formula using the (111) diffraction line and TEM images of converted carbon nanofibers.
다중 DSP 보드를 이용한 프로그램 가능한 도플러 처리기
신현익,김환우 대한전자공학회 2003 電子工學會論文誌-SC (System and control) Vol.40 No.5
도플러 처리(Doppler processing) 기능은 잔류(residue) 클러터(clutter)의 제거뿐만 아니라 위상정합누적(coherent integration)을 수행하므로, 펄스 도플러 레이더에 있어서 가장 핵심적인 역할을 수행한다. 디지털 신호처리기(DSP : digital signal processor)의 성능향상과 더불어 DSP를 이용한 구현이 점점 일반화 되어가고 있다. 도플러 처리기가 입력신호를 실시간으로 처리하기 위해서는, 다중 DSP를 이용한 병렬처리 개념이 일반적으로 사용되어야 한다. 본 논문에서는 아날로그 디바이스사의 ADSP21060 8개를 탑재한 Morocco-2 보드를 사용하여 MTI(moving target indicator)필터, 도플러 필터뱅크(DFB : Doppler filter bank) 및 제곱검출기(square-law detector) 등으로 구성된 프로그램 가능한 구조의 도플러 처리기를 구성하였다. 위상정합처리구간(CPI : coherent processing interval) 동안 수신된 입력데이터의 분배(distribution)시간, 출력데이터의 전송(transfer)시간 및 알고리즘 수행에 소요되는 연산시간 등을 수식으로 표현하여, 전체 처리시간과 도플러 처리기 구현에 소요되는 DSP의 수를 예측하였다. 또한 레이더 운용에 필요한 각종 타이밍신호 및 모의 표적신호를 발생할 수 있는 TSG(timing signal generator)를 이용하여 도플러 처리기의 실시간 연산기능을 확인하였다. Doppler processing is the heart of pulsed Doppler radar. It gives a clutter elimination and coherent integration. With the improvement of digital signal processors (DPSs), the implementation using them is more widely used in radar systems. Generally, so as for Doppler processor to process the input data in real time, a parallel processing concept using multiple DSPs should be used. This paper implements a programmable Doppler processor, which consists of MTI filter, DFB and square-law detector, using 8 ADSP21060s. Formulating the distribution time of the input data, the transfer time of the output data and the time required to compute each algorithm, it estimates total processing time and the number of required DSP. Finally, using the TSG that provides radar control pulses and simulated target signals, performances of the implemented Doppler processor are evaluated.
위상정합 레이더에 대한 EA효과 분석용 타이밍 신호발생기
申鉉翼,林重洙,金煥宇 대한전자공학회 2002 電子工學會論文誌-SC (System and control) Vol.39 No.3
A timing signal board which can be used to analyze EA effect for coherent radar systems is introduced. It is capable of generating the timing signals that are needed for EA test about radar systems in real time. Its function to generate baseband target signal makes it easy to analyze EA effect. Because all parameters of timing signals can be changed by software, it is very easy to configure many kinds of test scenarios. 위상정합(coherent) 레이더에 대한 EA 효과를 다양하게 분석할 수 있는 타이밍 (timing) 신호 발생기를 설계 및 제작하였다. 제작한 신호발생기는 EA 장비 및 위상정합 레이더에 필요한 각종 타이밍 신호 및 모의 표적신호를 실시간으로 발생하며, 모의 표적신호 발생기능은 레이더에 대한 EA 효과를 쉽게 확인할 수 있도록 하여준다. 타이밍신호의 모든 파라미터는 프로그램에 의해 변경 가능하기 때문에, 다양한 형태의 시험 시나리오를 쉽게 구성할 수 있다.