http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최인수(In Su Choi),도범성(Bum Sung Do),박창수(Chang Soo Park),박중구(Jung Gu Park) 한국가스학회 2009 한국가스학회지 Vol.13 No.2
본고는 21세기 들어 고유가와 기후변화협약에 대응하여 중요성이 더해지고 있는 한국과 일본의 도시가스기업의 생산성을 분석하였다. 맘퀴스트 생산성 지수(Malmquist Productivity Index: MPI)를 통해 1997년부터 2005년까지 한국 30개, 일본 5개 기업들의 재무제표를 활용하여 기간 전체로, 그리고 수요의 구조변화를 나타내었던 2000년을 기준으로 이전과 이후의 생산성을 평가하였다. 분석의 결과, 첫째, 1996년~2005년 전체 기간의 MPI 누적지수에서 한국의 도시가스산업이 일본보다 상위에 있는 것으로 분석되었다. 그러나 기간별로 본 MPI 개선효과는 일본의 경우 1997~2000년 동안 -1.03%에서 2001~2005년 동안에는 -1.72%로 근소한 차이를 나타낸 반면, 한국의 경우에는 전반기 0.37%(금융외환위기를 경험한 98년 제외시 0.80%)이었지만 후반기에 -0.60%로 악화된 것으로 나타났다. 둘째, 후반기 한국의 MPI 악화는 기술적 효율성 지수보다는 기술변화 지수가 전반기 -0.88%(98년 제외시 0.29%)에서 후반기 -1.29%로 크게 악화된 것에 기인하는 것으로 분석되었다. 이에 따라 한국의 도시가스사업은 2001년 이후 악화되고 있는 생산성 증가율과 악화의 요인이 되고 있는 기술변화를 개선하는 정책적 노력이 필요하다. This article makes a comparative analysis on the productivity in gas distribution industry between Korea and Japan, using Malmquist productivity index(MPI). The estimated MPI during 1997~2005 shows that the productivity of Korean gas distribution industry has been generally higher than that of Japanese gas distribution industry. But Korean MPI made a drastic change from positive improvement (+ 0.37) during 1997~2000 to severe deterioration (-0.60) during 2001~2005, while Japan MPI has seldom changed. This change of Korean MPI is analyzed to result from the worsening of technical change rather than technical efficiency change. According to this result, Korean gas distribution industry needs to improve the technical change.
반복 복호 횟수 감소를 통한 저전력 LDPC 복호기 설계
이준호,박창수,황선영,Lee, Jun-Ho,Park, Chang-Soo,Hwang, Sun-Young 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.9c
LDPC 부호는 4G 이동통신 시스템에 적합한 오류 정정 부호이다. 그러나 알고리듬의 특성상 좋은 BER 성능을 위해서는 반복 복호에 의한 많은 연산량이 요구된다. 본 논문에서는 복호지연과 전력 소모에 대한 복호기의 성능을 증가시키기 위하여 반복 복호 횟수를 줄이는 알고리듬에 대하여 제안한다. 제안된 알고리듬은 현재 LLR 복호값과 이전 LLR 복호값 사이의 변화를 측정하고 변화 방향을 예측하며, 패리티 검사식을 만족시켜 수렴속도를 높이도록 LLR 값의 sign 비트를 반전시킨다. 실험결과, 제안한 방법은 BER 성능의 감소 없이 반복 복호 횟수를 약 33% 정도 줄이는 것이 가능하며 감소된 반복 복호 횟수에 비례하여 소모 전력도 감소시킬 수 있다. LDPC Low Density Parity Check) code, which is an error correcting code determined to be applied to the 4th generation mobile communication systems, requires a heavy computational complexity due to iterative decodings to achieve a high BER performance. This paper proposes an algorithm to reduce the number of decoding iterations to increase performance of the decoder in decoding latency and power consumption. Measuring changes between the current decoded LLR values and previous ones, the proposed algorithm predicts directions of the value changes. Based on the prediction, the algorithm inverts the sign bits of the LLR values to speed up convergence, which means parity check equation is satisfied. Simulation results show that the number of iterations has been reduced by about 33% without BER performance degradation in the proposed decoder, and the power consumption has also been decreased in proportional to the amount of the reduced decoding iterations.
박근형(Keun Hyung Park),민택기(Taeg Ki Min),박창수(Chang Soo Park) 한국생산제조학회 2006 한국생산제조학회지 Vol.15 No.2
A turbine blade operates under high temperature, high pressure, and the loads have the characteristics that the amplitudes change. Therefore, it is important to perform a stress analysis considering thermal and pressure loads. The purpose of this study is to investigate the effects of these loads on gas turbine blade through thermal stress analysis. The analysis results shows that pressure in gas fluid flow around blade is high in leading edge part, Gas temperature is connections with pressure of flow around blade. The distribution of stress from blade is appearing as is different at suction side and pressure side.
박창수(Chang-Soo Park),천영학(Young-Hak Chun),임영철(Young-Cheol Lim),정동호(Dong-Ho Jung),김창수(Chang-Soo Kim) 한국멀티미디어학회 2010 한국멀티미디어학회 학술발표논문집 Vol.2010 No.1
풍수해로 인한 피해를 경감하기 위해서는 풍수해에 대비하여 미리 방재 대책을 세우는 것이 효율적이다. 따라서 본 연구에서는 부산지역의 풍수해 피해 발생 현황, 피해 현황, 발생원인, 복구액 현황 등을 조사하고, 피해 발생 때의 기상 자료도 조사를 하여 분석함으로써 풍수해 피해를 줄이기 위한 대책 수립을 위한 기반 자료를 제시한다.
박창수(Chang Soo Park),이필형(Pil Hyong Lee),한상석(Sang Seok Han),이재영(Jae Young Lee),황상순(Sang Soon Hwang) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
Flame pattern in burner used in steel industry that constitutes 30% of country energy consumption is generally characterized as long narrow flame pattern so that localized heating causes product quality worse and many burners are needed for proper heating. This paper deals with flat wide flame pattern which has advantage in terms of uniform heating using less number of burners. For that purpose, impinging jet system of fuel and oxidant was used for making flat wide flame. Results show that nozzle angle 75° of impinging jet is found to be optimum configuration for making effective wide flame which has uniform radiation heat transfer and flame temperature is also most uniform along the flame width for that nozzle angle.