http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수리 가능한 체계에 대한 Upside-Down 욕조 곡선 형태의 삼분할된 고장 강도 모형
박상근,김상부,박우재 한국신뢰성학회 2021 한국신뢰성학회 학술대회논문집 Vol.2021 No.6
일반적으로 수리 가능한 체계는 개발 초기의 많은 고장이 설계 변경과 같은 시정조치로 인해 점점 줄어들면서 고장 강도가 단조감소의 형태로 나타난다. 하지만, 항공기 에어컨, 증기 배기장치, 그리고 특정 무기체계의 개발 및 운용 시험 등에서는 고장 강도가 증가하다 감소하는 Upside-Down 욕조 곡선 형태로 나타나는 경우가 있다. 이 연구에서는 Upside-Down 욕조 곡선에서 고장 강도가 증가하다가 감소하기 전에 Random Failure로 인해 고장 강도가 일정한 값을 가지는 상수 구간을 고려하여 수리 가능한 체계에 대한 Upside-Down 욕조 곡선 형태의 삼분할 된 (Three Segmented) 고장 강도 모형을 제안하고, 최우추정법 (MLE : Maximum Likelihood Estimation)과 최소제곱법 (LSE : Least Squares Estimation)을 이용하여 변화점 (Change Point) 및 고장 강도 모형의 모수 추정 절차를 제안하였다. 그리고 이 연구에서 제안한 고장 강도 모형을 사용하여 특정 무기체계의 개발 단계 고장 데이터를 분석하고 구한 Likelihood, AICc (Akaike Information Criterion Corrected), MSE (Mean Squared Error) 값을 기존 모형들과 비교 분석하였다.
박상근,Park, Sang Kun 한국교통대학교 융복합기술연구소 2012 융ㆍ복합기술연구소 논문집 Vol.2 No.2
In this paper, we perform a ANSYS simulation of assembly structure composed of three parts, bolt, nut, and coil spring, under the loading of a screw torque 640~800 ($N{\cdot}m$) derived from the given bolt tensile strength 10.9, which allows us to investigate a lock-nut mechanism for the prevention of bolt-loosening after three parts are fastened. And also we investigate the safety factor of each component with effective stress distribution obtained from the simulation, which enables us to estimate the structural safety of a new lock-nut structure. Both simulation and investigation shown in this paper will contribute to the development of a new lock nut structure.
SPSS 프로그램을 이용한 아산시 하천의 데이터 분석 및 평가에 대한 연구
박상근,김민지,공지희,김소연,윤서은,조대철 순천향대학교 산업기술연구소 2022 순천향 산업기술연구소논문집 Vol.28 No.2
This paper is about a big data analysis for water quality control in two major streams in Asan city. All the data used in this work were collected from publicly open sources such as municipal wastewater treatment facilities and nationwide water data under Department of Environmental Ministry. In the correlation analysis, water quality factors excluding phosphorus are highly correlated with water temperature. On the other hand, in the regression analysis, the water quality factors of Sap-Gyo Stream were more sensitive to water temperature than those of Gok-Gyo Stream.
박상근,박주석,조현양 한국문헌정보학회 2013 한국문헌정보학회지 Vol.47 No.3
The primary purpose of this study is to understand academic library service as a brand and a set of brand offerings. Based on previous studies, the study has built a classification of three distinctive perceptual aspects of library services; perceptual aspect of the service, experiential aspect of the service, and functional aspect of service. Eleven measurement items and 45 questions that are subject to the items are studied and employed from previous studies, each of the items were allocated through Item Response Theory (IRT) test and cluster analysis to filter in items of substantial contribution to the constructs as well as filtering out less contributable ones. The study shows there are 27 effective items to understand and measure library service as a brand. 이 연구의 목적은 대학 도서관의 브랜드 이미지 측정을 위한 연구모형을 제시하는 것이다. 도서관 브랜드 이미지의 구성요소를 추출하기 위하여 선행연구를 조사하여 도서관 브랜드 이미지의 구성차원을 기능적 이미지, 경험적 이미지, 상징적 이미지의 3개의 차원으로 나누고, 이를 다시 총 11개의 하부차원과 45개의 항목으로 구분하였다. 구분된 항목을 대상으로 IRT(item response test)와 군집분석을 실시하였으며, 그 결과 총 3개의 차원과 9개의 하부차원 그리고 27개의 항목이 도서관의 브랜드 이미지 영향요소로서 유효한 것으로 나타났다.
도서관 서고 유도 Sign System 현장 사례 연구 - S대학 중앙도서관 사례를 중심으로 -
박상근,이재원,Park, Sang-Kun,Lee, Jae-Won 한국도서관정보학회 2019 한국도서관정보학회지 Vol.50 No.2
본 연구는 서고 내부에서 이용자가 목표지에 보다 능률적으로 도달할 수 있도록 하기 위한 서고 Sign System의 구체적 적용에 대한 사례 및 과정을 밝히는데 목적이 있다. 이를 위해 S대학 중앙도서관의 서고 구조, Sign 현황, 이용자 관찰, 이용자 선호조사, 시안제작 등의 절차를 거쳐 도서관 서고 현장에 새로운 Sign을 적용하였다. 상세한 제작과정 및 이용자의 반응을 파악하고, 추후 대형 도서관 서고 Sign 제작 시 보완되어야 할 사항 등을 제언하였다. The purpose of this study is to clarify the case and process of the application of the sign system in order to enable the user to reach the target site more efficiently in the library. For this purpose, a new sign system was applied to the S University library through procedures such as library structure, sign status, user observation, cyan production and preference survey. Detailed production process and user's reaction were identified. Based on this we suggested improvements to the library stacks signage system.