http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
$MgB_2$ bulk의 미세구조와 임계전류밀도에 미치는 polyacrylic acid doping 효과
이승묵,황수민,이창민,주진호,김찬중,Lee, S.M.,Hwang, S.M.,Lee, C.M.,Joo, J.,Kim, C.J. 한국초전도학회 2010 Progress in superconductivity Vol.11 No.2
We fabricated the polyacrylic acid (PAA)-doped $MgB_2$ bulks and characterized their lattice parameters, actual C substitutions, microstructures, and critical properties. The boron (B) powder was mixed with PAA using N,N-dimethylformamide as solvent and then the solution was dried out at $200^{\circ}C$ and crushed. The C treated B powder and magnesium powder were mixed and compacted by uniaxial pressing at 500 MPa, followed by sintering at $900^{\circ}C$ for 1 h in high purity Ar atmosphere. We observed that the PAA doping increased the MgO amount but decreased the grain size, a-axis lattice constant, and critical temperature ($T_c$), which is indicative of the C substitution for B sites in $MgB_2$. In addition, the critical current density ($J_c$) at high magnetic field was significantly improved with increasing PAA addition: at 5 K and 6.6 T, the $J_c$ of 7 wt% PAA-doped sample was $6.39\;{\times}\;10^3\;A/cm^2$ which was approximately 6-fold higher than that of the pure sample ($1.04\;{\times}\;10^3\;A/cm^2$). This improvement was probably due to the C substitution and the refinement of grain size by PAA doping, suggesting that PAA is an effective dopant in improving $J_c$(B) performance of $MgB_2$.
카본블랙이 도핑 된 $MgB_2$ 초전도체의 Ag 첨가의 영향
김효진,김현지,김찬중,박해웅,Kim, H.J.,Kim, H.J.,Kim, C.J.,Park, H.W. 한국초전도학회 2010 Progress in superconductivity Vol.12 No.1
In this work we synthesized both MgB2 and Carbon doped MgB2 superconductor with Ag addition via high energy milling and substituent heat treatment. Heat treatments were performed at $900\;^{\circ}C$ for 30 min in flowing Ar gas. We varied amount of Ag powder. In a range of Ag powder was 0~5wt%. The effect of Ag was correlated with superconducting properties. The results show a slight decrease in critical temperature ($T_c$) and a reduction of critical current density ($J_c$) at high fields for the Ag-doped samples as compared to the un-doped samples. Reduction of $J_c$ may be due to the formation of MgAg compound.
CT영상에 기반한 복부대동맥과 장골동맥 분기관 모델의 혈류유동 해석
홍이송,김민철,강현민,이종선,김찬중,이종민,김대수,이건,Hong Y. S.,Kim M. C.,Kang H. M.,Lee C. S.,Kim C. J.,Lee J. M.,Kim D. S.,Lee K. 대한의용생체공학회 2004 의공학회지 Vol.25 No.6
건강한 정상인의 복부대동맥과 장골동맥 분기관의 다이콤 의료 영상으로부터 구성된 혈관 모델을 대상으로 전산혈류해석을 수행하였다. 본 연구에서는 CT로 촬영한 혈관영상으로부터 단면영상을 읽고 각 단면의 경계 좌표를 매끄럽게 추출하는 프로그램을 개발하여 적응하였다. 해석용 3차원 메쉬 생성과 혈류해석은 상용프로그램을 사용하였다. 해석을 통해 얻어진 압력, 속도 및 유량 분포는 정상인의 생리학적 범위 내에 있었다. 초음파로 측정된 장골동맥 중심부의 심장 수축기 속도는 해석에 비해 20% 정도 작은 값을 보였으며 한 주기 동안 속도 변화의 경향은 유사하였다. 본 연구의 접근방법은 환자 개인의 실제 혈관 형상에 기반한 혈류해석으로서 좁아진 동맥 또는 시술 될 동맥에서의 압력, 속도값, 속도분포에 대한 정보를 제공한다. 이 결과는 의사로 하여금 환자의 혈류역학적 변수의 변화를 파악하게 하여 환자의 상태를 더 잘 이해하고 수술의 필요성을 판단하도록 도움을 줄 수 있으며 나아가 혈관 수술의 기초자료로 사용될 수 있을 것이다. 이 연구는 향후 동맥경화와 밀접히 연관된 혈류역학적 변수의 분포를 혈관 내에 보여줌으로서 동맥경화를 조기 진단하는 프로그램으로 발전할 것으로 기대된다. Numerical simulation of blood flow has been conducted based on real vessel geometries generated front DICOM medical images of abdominal and iliac bifurcated arteries of a healthy man. A program was developed to read cross sectional images of the three dimensional arteries and smoothly extract boundary coordinates of vessels. Commercial programs were employed for mesh generation and flow simulation. Pressures, velocities, and flow distributions were found to lie within normal physiological ranges. Peak velocity measured in the iliac artery by ultrasound was 20% smaller than that obtained by simulation. The trend of velocity variation in a cardiac cycle was fairly similar between the simulation and the ultrasonic measurements. Simulation based on real vessel geometry of individual patient provides information on pressure, velocity, and its distribution in the diseased arteries or arteries to be surgically treated. The results of simulation may help surgeons to better understand hemodynamic status and surgical need of the patient by revealing variation of the hemodynamic parameters. Futhermore, they may serve as basic data for surgical treatment of arteries. This research is expected to develop to a program in the future that early diagnose atherosclerosis by showing distribution of a hemodynamic index closely related to atherosclerosis in arteries.
김남규,김이정,전병혁,김찬중,Tan, Tan Kai,Kim, N.K.,Kim, Y.I.,Jun, B.H.,Kim, C.J. 한국초전도학회 2007 Progress in superconductivity Vol.9 No.1
The most common technique to fabricate $MgB_2$ superconducting wire is by powder-in-tube (PIT) technique. Therefore, the starting powder for the processing of $MgB_2$ superconductors is an important factor influencing the superconducting properties and performance of the conductors. In this study, the influence of magnesium precursor powders and annealing temperatures on the transition temperatures ($T_c$) and critical current densities ($J_c$) of $MgB_2/Fe$ wires was investigated. All the $MgB_2/Fe$ wires were fabricated by in situ PIT process. It was found that higher $J_c$ was obtained for $MgB_2$ wires with smaller particle size of magnesium precursor powders. The $J_c$ also increases with decreasing annealing temperatures.