http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진동 유동장에서 유동공진에 의한 실린더 후류의 와류 특성 변화
김원태,성재용,유정열,Kim, Won-Tae,Sung, Jae-Yong,Yoo, Jung-Yul 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.11
When vortex shedding is locked-on to a single frequency oscillatory flow, the variations of vortex dynamics are investigated using a time-resolved PIV system. Wake regions of recirculation and vortex formation, dynamic behavior of the shed vortices and the Reynolds stress fields are measured in the wake-transition regime at the Reynolds number 360. In the lock-on state, reduction of the wake region occurs and flow energy distributed downstream moves upstream being concentrated near the cylinder base. To observe the dynamic behavior of the shed vortices, the trajectory of the vortex center extended to the inside of the wake bubble is considered, which describes well the formation and evolution processes. The Reynolds stresses and their contributions to overall force balance on the wake bubble manifest the increase of the drag force by the lock-on.
김원태,강신재,Kim, Won-Tae,Gang, Sin-Jae 대한기계학회 1997 大韓機械學會論文集B Vol.21 No.9
The flow characteristics of an intermittent fuel injection into a stationary ambient air were investigated using gasoline. The measurements were made by two-channel, air cooling type Phase Doppler Anemometer(PDA) system (DANTEC, 750 MW). And a pintle type injector of MPI (Multi-point Port Injection) system was utilized as a fuel injector. The PDA receiver optic was set up in a 60.deg. C forward scatter arrangement to obtain the optimum scattering signal of fuel droplets. The data were obtained by synchronizing PDA system with the fuel injection period, and the axial and radial velocity and turbulent components of fuel droplets were mainly measured for the analysis of temporal and spatial distribution depending upon the fuel injection pressures.
4공 가솔린 분사기의 2중 분무 사이에서 연료 액적들의 유동특성
김원태,강신재,노병준,Kim, Won-Tae,Kang, Shin-Jae,Rho, Byung-Joon 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.4
This study investigates the flow characteristics of fuel droplets between twin spray for the 4-hole injector used a 4-valve gasoline engine. The injectors for this study were the three types of 4-hole gasoline injector in which orifice diameter was 0.24mm. The spray behavior of twin spray was investigated by means of visualization employed stroboscope. A PDPA system was employed to simultaneously measure the size and velocity of fuel droplets. The 3 dimensional mean velocities. droplet size distributions, SMD and joint probability density function of velocity and droplet size are analyzed at the center of the spray and the center region of twin spray. As a result, the configurations of injector exit such as orifice interval and length of outlet, are very important factors that affect the flow characteristics of fuel droplets at the center region of twin spray.
RFID 시스템에서 비트 변화 감지를 이용한 가변 슬롯 트리 기반 충돌 방지 알고리즘
김원태,안광선,이성준,Kim, Won-Tae,Ahn, Kwang-Seon,Lee, Seong-Joon 한국정보처리학회 2009 정보처리학회논문지 A Vol.16 No.4
일반적인 RFID 시스템은 하나의 리더와 다수의 태그로 구성되며, 단일 무선 공유 채널을 갖는다. 이로 인해 리더의 요구에 여러 태그들이 동시에 응답할 때 빈번하게 충돌이 발생한다. 태그 충돌을 억제하기 위해 QT[8]와 HCT[10], BSCTTA[2], QT-BCS[9]등과 같은 많은 알고리즘들이 제안되어 왔다. 본 논문에서는 BSCTTA 알고리즘을 기반으로 다중 그룹핑과 비트 변화 감지 센서를 이용한 트리 기반 충돌 방지 알고리즘(TABCS, Tree-based anti-collision algorithm using Bit Change Sensing)을 제안한다. 제안된 알고리즘은 비트 변화 감지 장치를 통해 충돌이 발생하더라도 리더는 태그들이 비트 변화 감지 장치를 이용하여 전달한 비트의 유형을 인식할 수 있게 한다. 또한, TABCS는 유일한 프리픽스를 빠르게 생성하게 하고, 모든 태그의 인식에 필요한 비트 전송량을 줄임으로써 기존 알고리즘에 비해 인식 속도를 빠르게 한다. 시뮬레이션을 통한 성능 평가에서 기존에 제안된 다른 알고리즘에 비해 전체적으로 우수한 성능을 보임을 검증한다. Generally, RFID systems are composed of one reader and several passive tags, and share the single wireless channel. For this reason, collisions occurwhen more than two tags simultaneously respond to the reader's inquiry. To achieve this problem, many papers, such as QT[8], HCT[10], BSCTTA[2], and QT-BCS[9], have been proposed. In this paper, we propose the tree-based anti-collision algorithm using a bit change sensing unit (TABCS) based on BSCTTA algorithm. The proposed algorithm can identify bits returned from tags through bit change sensing unit, even if multi collisions occur. So, it rapidly generates the unique prefix to indentify each tag, and reduce the total of bits. As the result, the cost of identifying all tag IDs is relatively reduced as compared with existing algorithms. It is verified through simulations that the proposed algorithm surpass other existing algorithms.