http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레토르트 및 감마선 조사에 의한 화닭 덮밥 소스의 미생물 제어 효과 비교
김영식,김현주,윤요한,신명곤,김천제,신미혜,이주운,Kim, Young-Sik,Kim, Hyun-Joo,Yoon, Yo-Han,Shin, Myung-Gon,Kim, Cheon-Jei,Shin, Mee-Hye,Lee, Ju-Woon 한국축산식품학회 2010 한국축산식품학회지 Vol.30 No.1
This study evaluated the antimicrobial effects of retort process and gamma irradiation on reduction of total bacterial populations in spicy chicken sauce, which is served on top of the steamed rice. Commercial spicy chicken sauce was treated with retort and gamma ray at 0, 1, 3, 5, and 10 kGy. Total aerobic bacterial populations were then enumerated on plate count agar and isolated bacteria from the test samples were identified using PCR analysis. Moreover, gamma ray sensitivity of identified bacteria was evaluated by $D_{10}$ values, and genotoxicity of gamma-irradiated samples was examined. Gamma irradiation at 3 kGy reduced total aerobic bacterial cell counts in spicy chicken sauce below detection limit, but total aerobic bacterial cell counts in test samples treated with retort were 2.1 log CFU/g. Identified bacteria from the samples were Bacillus subtilis, B. amyloiquefaciense, and B. pumils, and the $D_{10}$ values for B. subtilis and B. cereus were 0.39 ($R^2\;=\;0.921$) and 0.28 log CFU/g ($R^2\;=\;0.904$), respectively. The SOS chromotest showed that the gamma-irradiated spicy chicken sauce did not cause mutagenicity. These results indicate that gamma irradiation of spicy chicken sauce could be useful in ensuring microbial safety.
초내열합금분말에 의한 PTA 오버레이부의 연삭 마모 특성 연구
김영식,최영국,임창훈,김종도,Kim, Young-Sik,Choi, Young-Gook,Lim, Chang-Hoon,Kim, Jong-Do 대한용접접합학회 2009 대한용접·접합학회지 Vol.27 No.3
The Plasma Transferred Arc (PTA) overlay welding method is lately introduced as one of the most useful surface overlay method of the engine component. In this paper, the overlay welding on the SNCrW heat resisting alloy was conducted by the PTA overlay welding process using the super alloy powder. The characteristics of the overlay layers were investigated through the metallurgical and abrasive test. Experimental results showed that the overlay on the SNCrW heat resisting alloy surface was successfully made without hot cracking. The friction wear characteristics of the Co-base Stellite 6 overlayer were most superior. However the abrasive wear characteristics were most inferior in the Co-base Stellite 6 overlayer.
가정의학과 외래 우울증환자에서 moclobemide의 안전성 및 유효성 평가를 위한 시판후조사
김영식,이근미,김병성,신호철,성은주,이상엽,문유선,송상욱,김철환,선우성,Kim, Young-Sik,Lee, Keun-Mi,Kim, Byung-Sung,Shin, Ho-Cheol,Sung, Eun-Ju,Lee, Sang-Yeoup,Moon, Yoo-Sun,Song, Sang-Wook,Kim, Cheol-Hwan,Sunwoo, Sung 대한임상약리학회 2002 臨床藥理學會誌 Vol.10 No.1
Background : Depression is quite a common disease in primary care however, studies for the safety and effectiveness of antidepressants in primary care setting are rare in Korea. Objectives : This multi-centered post-marketing study was performed to evaluate the safety and effectiveness of Moclobemide and to find out the factors related to the adherence among patients with depression in family practice. Methods : A total of 386 patients were enrolled from July 1999 to January 2000 by twenty family doctors from fifteen family practice centers. They were prescribed Moclobemide and were reevaluated at the 4th, 8th, and l2th week. Evaluation of compliance, safety and effectiveness were performed with pre-made, structured self-reported questionnaires. Evaluation of effectiveness was also performed utilizing self-rating depression scale (SDS). Results : Among 386 patients, safety was evaluated in 310 patients and effectiveness was evaluated in 239 patients. During the first 12 weeks, the number of subjects continuing with Mocclobemide was 136(37.1%). 141 subjects (38.4%) discontinued taking the drug and 90 subjects (24.5%) dropped out at the 12th week. Considering drop-out patients as ineffective cases, overall effectiveness was estimated to be 84.5%. Symptoms improved with time in patients whose follow-up were completed (P<0.01). The SDS score decreased by an average of ${6.8{\pm}9.1(12.2{\pm}19.1%)}$ after 12 weeks(p<0.01). During the study, 33(10.6%) subjects reported adverse events. The most commonly reported adverse events, in descending order, were dizziness(2.3%), headache(1.6%), insomnia(1.3%), facial edema(1.3%), constipation(1.0%), nausea(1.0%) and tremor(1.0%). The main reasons for discontinuing antidepressants were attributed to improvement of symptoms and manifestation of adverse events. Conclusion : The percentage of adherence at 12th week of Moclobemire among patients suffering from depression in the family practice outpatient clinic was shown to be 49%. The antidepressant effect and safety of Moclobemide was relatively superior.
MEMS 공정을 이용한 32x32 실리콘 캔틸레버 어레이 제작 및 특성 평가
김영식,나기열,신윤수,박근형,김영석,Kim Young-Sik,Na Kee-Yeol,Shin Yoon-Soo,Park Keun-Hyung,Kim Yeong-Seuk 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.10
This paper reports the fabrication and characterization of $32{\times}32$ thermal cantilever array for nano-scaled memory device applications. The $32{\times}32$ thermal cantilever array with integrated tip heater has been fabricated with micro-electro-mechanical systems(MEMS) technology on silicon on insulator(SOI) wafer using 9 photo masking steps. All of single-level cantilevers(1,024 bits) have a p-n junction diode in order to eliminate any electrical cross-talk between adjacent cantilevers. Nonlinear electrical characteristic of fabricated thermal cantilever shows its own thermal heating mechanism. In addition, n-channel high-voltage MOSFET device is integrated on a wafer for embedding driver circuitry.
고체 내부의 구조적 변화를 위한 Laser Pulse의 설계
김영식,Kim, Young Sik 대한화학회 1995 대한화학회지 Vol.39 No.1
주어진 시간에 금속 고체 내부의 목표 부위에 탄성에너지를 집중시킬 수 있도록 표면에 가해주는 최적의 레이저 pulse의 형태를 디자인 하는 문제에 관하여 연구하였다. 금속고체 표면에 레이저를 쪼여주면 흡수된 광에너지가 열로 바뀌어 열팽창에 의하여 종파와 횡파가 고체 내부로 전파된다. 최소의 레이저의 세기를 사용하고 다른 부위에 영향을 최소화하면서 목표 부위에 원하는 에너지를 집중시킬 수 있는 최적의 레이저 펄스의 형태를 공액 변화 방법과 반 공간 Green 함수를 이용한 유한 요소법으로 조사하였다. 최적의 레이저 펄스로부터 원하는 시간에 목표 부위에 탄성에너지를 집중시키는 것을 보여주었고 또한 대부분의 에너지가 방향성이 큰 횡파로부터 온다는 것을 알았다. This paper is concerned with the design of optimal surface heating patterns that result in focusing acoustic energy inside a subsurface target volume at a specified target time. The surface of the solid is heated by an incident laser beam which gives rise to shear and compressional waves propagating into the solid. The optimal heating design process aims to achieve the desired energy focusing at the target with minimal laser power densities and minimal system disturbance away from the target. The optimality conditions are secured via the conjugated gradient method and by the finite element method along with using the half-space Green's function matrix. Good quality energy focusing is achived with the optimal designs reflecting the high directivity of the photothermally generated shear wave patterns.
김영식,권오형,박래홍,Kim, Young-Sik,Kwon, O-Hyung,Park, Rae-Hong 대한전자공학회 1999 電子工學會論文誌, S Vol.s36 No.12
본 논문에서는 인간의 시각 시스템 (human visual system)을 이용한 웨이블릿 기반 다중해상도 워터마킹 방법을 제안하였다. 각 밴드의 에너지에 비례하여 각각 다른 길이의 워터마크가 삽입되었다. 여러 실험영상을 통한 실험결과에 의하면 제안한 3단계 웨이블릿 기반 워터마크 방법이 joint photographic experts group (JPEG) 압축, smoothing, cropping, collusion, 다중 워터마크 등의 다양한 공격에 강건한 것으로 나타났다. A wavelet based multiresolution watermarking method using the human visual system (HVS) is proposed, in which a different number of watermarks, in proportion to the energy contained in each band, are embedded into each band. Experiments with various test images show that the proposed three-level wavelet based method is robust to various attacks such as joint photographic experts group (JPEG) compression, smoothing, cropping, collusion, multiple watermarking, and so on.
전단보강근이 없는 철근콘크리트보의 매립형 CFRP 전단보강효과에 대한 연구
김영식,박성무,Kim, Young-Sik,Park, Sung-Moo 한국공간구조학회 2005 한국공간구조학회지 Vol.5 No.2
철근콘크리트구조물은 시간이 경과함에 따라 노후화현상이 일어난다. 이에 갱생수단으로 보수 보강이 이루어지고 있다. 현재 보강재료로써 FRP가 높은 관심과 더불어 많은 활용을 하고 이에 대한 연구가 이루어지고 있다. 본 연구에서는 전단보강근이 없는 철근콘크리트보에 매립형 탄소섬유막대(CFRP)를 전단보강하여 그에 따른 효과를 파악하기 위해 시험체를 제작하여 실험을 수행하였다. 전단보강근이 없는 철근콘크리트보에 매립형 탄소섬유막대(CFRP)를 전단보강하여 탄소섬유막대(CFRP)의 순수전단내력을 파악하고, 전단보강에 따른 시험체의 전단파괴거동을 파악하고자 한다. 또한 실험변수를 탄소섬유막대(CFRP)의 보강량과 보강간격으로 두어, 이에 따른 전단보강효과를 파악하고자 한다. The reinforced concrete becomes deteriorated. In strengthening of reinforced concrete structure, it is recently useing FRP. The purpose of this study is to investigate the shear resisting effort of filling-up CFRP in reinforced concrete beams without web reinforced. Six specimens were manufactured and tested. In the test result, it was analysis. The main variables in the test were a space and volume of CFRP.