http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저온(低溫)가스 연돌의 보온이 연돌의 최적높이에 미치는 영향
김영득,민만기,Kim, Y.D.,Min, M.K. 대한설비공학회 1990 설비공학 논문집 Vol.2 No.3
This paper presents that in the Korean Ondol Heating System using hard coal as an usual fuel, what effects an insulation of chimney with the low temperature gas flow has on the optimum chimney height which gives a maximum gas weight flow rate under the general weather data and actual design condition of chimney is compared with the bared chimney and studied. And also, the effects of chimney materials and diameter, dimensionless temperature difference, insulating materials and thickness which have on the optimum chimney height were researched and a good results increasing a maximum gas weight flowrate is obtained by insulating the chimney.
김영득,이상현,Ono, Yuya,이성희 한국수자원학회 2013 한국수자원학회논문집 Vol.46 No.4
물발자국은 제품과 서비스를 생산하는데 전과정 혹은 전체 공급망에서 사용된 담수의 양을 나타낸다. 물발자국 평가는 인간의 활동과 관련된 물의 희소성 및 오염과 관련된 정보를 파악하는데 보다 많은 정보를 주기 때문에 물소비관점에서 지속가능한 물관리에 기여할 수 있을 것으로 기대된다. 물발자국 제도의 도입을 위해서 물발자국 데이터베이스/물계정이 필수적인데 국내에서 전 산업부분에 적용할 수 있는 DB가 전무하다. 따라서 이 연구의 목적은 산업연관분석법을 이용해 국내의 403개 산업분야에 대한 물발자국 인벤토리를 개발하는 것이다. 주요 연구결과로는 농업분야의 물사용량이 전체 직접수의 79%를 차지하며, 공업분야는 간접수의 사용량이 82%로 주를 이루는 것으로 분석되었다. 물사용량은 벼가 가장 많지만, 다음은 수산양식과 과일 생산으로 조사되었고, 가장 물사용강도(m3/원)가 높은 것은 비식용작물(103,263m3/백만원)로 분석되었고, 이와 같은 결과는 비식용작물(초지생산 등)의 직접수는 많지만 경제적 가치가 매우 낮아 높은 물사용강도를 보여주고 있다. 다음은 육림, 철광석, 원목, 수산양식, 상수도, 잡곡 등의 순으로 물사용 강도가 높게 나타났다. 전체적 관점에서 총 물사용량 중 56%가 간접수가 차지하기 때문에 간접수를 고려한 산업분야의 수자원관리, 즉 공급망에서 전과정을 고려한 관리가 물사용 효율성을 높이는데 중요하다는 것을 알 수 있다. 전과정 개념과 산업연관분석법을 이용한 물사용강도 자료는 물발자국 도입시 제품단위 물발자국 산정의 기초 인벤토리로 이용될 수 있을 것으로 기대된다. Water footprint of a product and service is the volume of freshwater used to produce the product, measured in the life cycle or over the full supply chain. Since water footprint assessment helps us to understand how human activities and products relate to water scarcity and pollution, it can contribute to seek a sustainable way of water use in the consumption perspective. For the introduction of WFP scheme, it is indispensable to construct water inventory/accounting for the assessment, but there is no database in Korea to cover all industry sectors. Therefore, the aim of the study is to develop water footprint inventory within a nation at 403 industrial sectors using Input-Output Analysis. Water uses in the agricultural sector account for 79% of total water, and industrial sector have higher indirect water at most sectors, which is accounting for 82%. Most of the crop water is consumptive and direct water except rice. The greatest water use in the agricultural sectors is in rice paddy followed by aquaculture and fruit production, but the greatest water use intensity was not in the rice. The greatest water use intensity was 103,263m3/million KRW for other inedible crop production, which was attributed to the low economic value of the product with great water consumption in the cultivation. The next was timber tract followed by iron ores, raw timber, aquaculture, water supply and miscellaneous cereals like corn and other edible crops in terms of total water use intensity. In holistic view, water management considering indirect water in the industrial sector, i.e. supply chain management in the whole life cycle, is important to increase water use efficiency, since more than 56% of total water was indirect water by humanity. It is expected that the water use intensity data can be used for a water inventory to estimate water footprint of a product for the introduction of water footprint scheme in Korea.
BL3용 공조기에서의 에너지 효율적 열교환기 사용에 관한 연구
김영득,이성재,권준호,김원갑,이명식 한국기계기술학회 2015 한국기계기술학회 학술대회논문집 Vol.2015 No.03
생물학적 위험등급 3등급 BL3용 공조기의 급배기는 밀폐 연구시설 사이의 교차오염을 막기 위하여 관계 규정에 의거 전외기 방식을 택하고 있다. 이와 같은 전외기 방식의 공조기는 에너지 소비가 많으며 게다가 BL3의 경우 하루 24시간 운전으로 인하여 에너지 소비가 매우 많으며 또한 연구시설의 대형화로 인하여 에너지 소비는 더욱 증가하게 될 것이다. BL3용 공조기에서의 에너지 절약에 관한 연구로는 국외 의 경우 전외기 방식에서 급기와 배기덕트 사이에 부동액 등을 사용한 핀-튜브 열교환기를 사용하여 배 기로부터 열회수를 통한 에너지 절약에 관한 연구를, 국내의 경우 생물학적 안전성을 기반으로 하는 재순 환에 의한 에너지 절약에 관한 연구를 시도하고 있다. 본 연구에서는 기존의 BL3용 공조기에서 주로 사 용하는 핀-튜브 열교환기와 마이크로 채널 열교환기에 대한 특성을 비교, 연구하였고 마이크로 채널 제작 을 위한 열교환기 설계 프로그램을 개발하였다.
스펙트럼 군집화를 활용한 전극 가공 형상의 메시 기반 두께 측정
김영득,엄주명,이동윤 한국CDE학회 2023 한국CDE학회 논문집 Vol.28 No.4
In electrode machining, determining the thickness of the shape to be processed is crucial for selecting machining conditions and tools. While legacy algorithms are proposed for measuring the thickness of given shapes, the automated identification of measurement areas in complex geometries remains challenging. This paper introduces a new approach, utilizing mesh data, to automatically segregate areas for thickness measurement in electrode shapes. The proposed method comprises four stages: mesh preprocessing, segmentation, clustering using spectral techniques, and thickness extraction. First, the mesh is aligned and segmented to isolate necessary parts. In the second step, the features of each face of the mesh is analyzed and the mesh is segmented by fusing similar faces together. In the third step, the similarity is calculated by comparing the features of the segmented meshes and spectral clustering is applied. Finally, distances between meshes within clusters are measured to compute thickness. By clustering essential components for thickness measurement, this method enables autonomous extraction of measurement parts in intricate shapes. A framework was developed by using the proposed method tested to 1274 machining samples. The test shows angular shapes are identified apparently whereas smooth cover is not correctly detected.