http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ITO 표면 처리와 음전극 변화에 따른 OLEDs의 특성 연구
김두석,장윤기,권영수,Kim, Doo-Seok,Jang, Yoon-Ki,Kwon, Young-Soo 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.12
In this study, we report an improved efficiency of Organic light emitting diodes(OLEDs), using $UV/O_3$ treated anode and different cathode. We investigated the efficiency of OLEDs by $UV/O_3$ treatment of ITO surface. We Performed $UV/O_3$ treatment and found that $UV/O_3$ treatment enhanced the performance of OLEDs. The fundamental structure of the OLEDs was ITO $anode/{\alpha}-NPD/Alq_3/Al$ or Li:Al cathode. The Li:Al can improve the OLEDs efficiency dramatically in cathode because it has lower work function than Al. Current-voltage, Luminance-voltage characteristics and luminance efficiency were measured at room temperature.
김두석,권동진,손철근,곽희로 한국조명전기설비학회 1994 조명.전기설비 Vol.8 No.4
본 논문에서는 기존의 펌프나 가스를 이용한 강제유동식 시스템과는 달리 회전원통을 이용한 유동대전현상에 대하여 연구하여, 강제유동식에서의 대전특성과 비교, 분석하였다. 연구결과, 회전원통 시스템에서의 회전원통의 회전속도 및 온도에 따른 유동대전 특성은 강제유동식과 같은 경향을 보여 회전원통 시스템이 유동대전현상을 연구하는데 적합함을 알 수 있었다. 회전원통시스템은 강제유동식에 비하여 실험장치의 기계적 구조가 간단하고, 적은 양의 절연유만이 필요하며, 여러 가지 다른 물질로 실험하기가 비교적 편리하였다. 또한 대전 방지제의 첨가나 절연유의 열화에 따른 대전현상 등을 연속적으로 측정할 수 있는 특징이 있음을 알 수 있었다. This paper studied the streaming electrification with the spinning cylinder system, and compared and analyzed it with the conventional forced flowing system which used a pump or gas for oil flowing As results, in spinning cylinder system, characteristics of the streaming electrification to its rotational speed and oil temperature are same tendency as those of the forced flowing system and it showed the spinning cylinder system is useful to study the streaming electrification. The spinning cylinder system has a simple mechanical structure and needs smaller amount of insulation oil than the conventional forced flowing system and the ef fects of various materials on the streaming electrification could be investigated more conveniently than other methods.
김두석,권동진,강창구 한국조명전기설비학회 1992 조명.전기설비 Vol.6 No.5
This paper presents the effect of moisture and dust on streaming electrification in transformer oil, in order to investigate the electrification tendency of oil adding moisture an dust. Authors designed series electrification device to analyse streaming electrification phenomena easily. Experimental results show that the streaming current is linearly increased with oil velocity and it has a peak value at about a 50 [%]. Adding of moisture and dust in oil decreased charging level and it was dominant in case of moisture.
변형된 경제 블록 병합 기법을 이용한 MPEG-4의 텍스처 부호화
김두석,고형화 한국통신학회 2000 韓國通信學會論文誌 Vol.25 No.4
본 논문에서는 MPEG-4의 텍스처 부호화시 변형된 경계 블록 병합 기법을 제안하였다. 경계 블록 병합 기법의 전처리 과정으로 VOP를 나누는 위치를 조절하여 병합 시 부호화해야 할 블록의 수가 최소가 되는 점을 찾아 이를 기준으로 VOP를 다시 분할하는 최적화된 영역 분할 방법을 제안하였다. 또한, 객체의 모양이 복잡한 경우에는 +90。 회전과 -90。 회전 병합을 추가함으로써 병합의 가능성을 높일 수 있다. 따라서 본 논문에서는 180。 회전 병합, +90。 회전 병합 그리고 -90。 회전 병합의 순서로 병합을 하는 다중 회전 병합을 제안하였다. 기존의 경계 블록 병합 기법에서는 병합이 되는 두 블록이 상관성이 적다면 큰 패딩의 효과를 기대할 수가 없게 된다. 따라서 본 논문에서는 병합을 해 준 후에 블록의 내용을 기반으로 패딩을 해 주었다. 제안한 방식은 기존의 경계 블록 병합 기법에 비해 동일 PSNR 하에서 약 5∼8(%) 정도 부호화 비트량을 감소시켰다. In this paper, we propose a modified boundary block merging technique for the texture coding of MPEG-4. We propose an ORP(Optimized Region Partitioning) method that partition the VOP-based reference position to minimize the number of coding blocks. The merging possibility is improved by adding +90。and -90。 Rotation merging. We propose a MRM(Multiple Rotation Merging) method which applies the rotation merging in the order of 180。, +90。and -90。. If a pair of boundary blocks has low correlation, existing BBM's padding technique is not efficient. Our padding after merging method gives better result even if it has low correlation. The proposed method showed 5 ~8(%) coding bit reduction at the same PSNR values compared to BBM method.