http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
W-Ni-Fe 중합금의 미세조직 변화에 대한 μ-phase의 영향
김대건,김은표,김영도,Kim, Dae-Geon,Kim, Eun-Pyo,Kim, Yeong-Do 한국재료학회 2002 한국재료학회지 Vol.12 No.1
In this study, the 95W heavy alloys of 3/7, 5/5 and 7/3 of Ni/Fe ratio were sintered at the temperature range between 1420 and $1480^{\circ}C$ for 1h and their microstructures were discussed for an effect of the ${\mu}$-phase $(Fe_7W_6)$ on the microstructure. The ${\mu}$-phase was observed in the only 95W-1.5Ni-3.5Fe alloy of 3/7 and it is thought to be formed and grown from the surface of the W particle. The W particle was surrounded with the ${\mu}$-phase and there were only the W particles and this phase without Ni-Fe-W matrix at the most part. The ${\mu}$-phase changed the interphase structure in the alloy and the grain growth of the W was suppressed because of interrupting the solution-reprecipitation of the W. The W content in the matrix was considered to be lowered due to the interruption of the solution-reprecipitation and the formation of the ${\mu}$-phase in the .
24개월 대기 노출된 Al1050 및 Al7075 알루미늄 합금 산화막에 대한 투과전자현미경 분석
김대건,김가림,최원준,반치범,Kim, Dae-Geon,Kim, Ga-Rim,Choi, Wonjun,Bahn, Chi Bum 한국표면공학회 2019 한국표면공학회지 Vol.52 No.2
Al1050 and Al7075 alloy specimens were exposed to atmospheric conditions for 24 months and analyzed by Transmission Electron Microscopy to characterize their corrosion behavior and oxide film characteristics, especially focusing on intergranular corrosion or oxidation. In general, the intergranular oxygen penetration depth of Al1050 was deeper than Al7075. Since O and Si signals were overlapped at the oxidized grain boundaries of Al1050 and Mg is not included in Al1050, it is concluded that Si segregated along the grain boundaries directly impacts on the intergranular corrosion of Al1050. Cr-Si or Mg-Si intermetallic particles were not observed along the grain boundaries of Al7050, but Mg-Si particle was barely observed in the matrix. 10-nm size Mg-Zn particles were also found all over the matrix. Mg was mainly observed along the oxidized grain boundary of Al7075, but Si was not detected due to the Mg-Si particle formation in the matrix and relatively low concentration of Si in Al7075. Therefore, it is thought that Mg plays an important role in the intergranular corrosion of Al7075 under atmospheric corrosion conditions.
김대건,Kim, Dae-Geon 한국통신학회 2007 정보와 통신 Vol.24 No.4
컨버전스시대의 꽃이라고 할 수 있는 IPTV 서비스는 세계 유수의 통신 사업자들을 중심으로 현재 빠르게 추진되고 있다. 이러한 IPTV 서비스의 세계적 추세에서 우리나라는 자타가 공인하는 세계 제일의 브로드밴드 강대국으로서, 이는 향후 다가올 컨버전스 시대에 강한 경쟁력 우위를 점할 수 있는 더할 수 없는 기회이다. 이에 본 기고에서는 IPTV에 관한 개요, 정책, 서비스, 요소기술, 국내외 현황 및 표준화에 대해 기술한다.
황칠나무 추출물을 12주간 음용한 비알코올성지방간(NAFLD) 비만대학생들에게 미치는 영향
김대건(Dae-Geon Kim),황길수(Gill-Su Huang) 한국엔터테인먼트산업학회 2012 한국엔터테인먼트산업학회 학술대회 논문집 Vol.2012 No.11
본 연구는 황칠나무 추출물이 비알코올성지방간(NAFLD)을 가진 비만대학생들에게 음용하게 한 후 aspartate aminotransferase(AST)와 alanine aminotransferase(ALT)를 측정하여 효능을 검증해 보고자 하였다. 부산지역 대학생 중 전문의에 의한 의학적 검진을 실시한 후 체지방율이 25%이상인 20대 비알코올성 지방간을 가진 비만 남자대학생을 대상으로 음용군 10명, 대조군 10을 선정하여 12주 동안 1일 2회 조식과 석식 전 공복에 1회 용량 60ml를 음용하게 하였다.SPSS 17.0 Windows 소프트웨어를 이용하여 모든 변인의 측정결과를 평균과 표준편차를 산출하고, 음용전과 12주 후의 차이검증과 그룹간의 차이검증은 이원분산분석(Two-way ANOVA)을 이용하여 통계적 유의수준은 p<.05로 하였다. 결과는 황칠나무 추출물은 비알코올성지방간(NAFLD)을 가진 비만대학생들에게 AST와 ALT에 효과가 있는 것으로 나타났다. 그리고 BMI에서도 효과는 나타냈지만, 이는 어떠한 원인 때문에 효과가 나타났는지는 후속 연구가 필요하다고 사료된다.
섬유를 혼입한 지하층 누름콘크리트의 균열저감을 위한 연구
김대건(Kim, Dae-Geon),박현정(Park, Hyun-Jung),이동운(Lee, Dong-Un) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.1
본 연구에서는 섬유를 혼입한 지하층 누름콘크리트의 균열 저감 특성에 관하여 분석되었다. 섬유의 최적 혼입량과 종류를 알아보기 위해 공기량, 슬럼프, 압축강도, 인장강도 및 소성수축시험을 실시하였다. 공기량 시험결과, 섬유를 혼입한 시편들이 플레인에 비하여 높은 공기량이 나타났다. 그리고 유동성 측정결과, 섬유를 혼입한 시편들이 플레인에 비하여 40-80%낮은 슬럼프를 나타냈다. 강토 특성에서는 섬유를 혼입한 시편들이 무근콘크리트에 비하여 높은 압축 및 인장강도를 나타냈다. 소성수축 시험결과 섬유를 혼입한 시편들이 플레인에 비하여 균열발생이 감소하였으며, 특히 NY섬유를 혼입한 시편의 경우에는 균열이 발생하지 않았다. 결과적으로 NY섬유를 0.6% 혼입하였을 때 누름 콘크리트에 최적의 특성을 나타내는 것을 알 수 있었다. The purpose of this study is to estimate crack reduction properties of covering concrete with fibers in basement. Air contents, slump, compressive strength, tensile strength and plastic shrinkage has been tested to conduct the optimum addition ratio and type of fiber. The results is a following. For the properties of air contents, all of the specimens added fibers shown the higher than plain concrete. For the flowability, slump decreased about 40-80% when all of the specimens added fibers. For the strength properties, the specimens added nylon fiber shown higher compressive and tensile strength about 5-15% comparing with other concrete. For the plastic shrinkage, cracking decreased when the fiber added comparing with plain concrete. Especially, when nylon fiber added in the concrete, the plastic shrinkage did not occurred. For the overall consideration, when the addition ratio of nylon fiber is 0.6%, the press concrete is identified as showed optimum properties.
김대건(Dae Geon Kim),신윤혁(Yoon Hyuk Shin),김성철(Sung Chul Kim),조한삶(Han Sam Cho) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
Today, many electric or electronic parts are used in the vehicles for high efficiency and driver"s convenience. The ISG (Integrated Starter and Generator) in the green car is merged with a starter and a generator motor. It is good to decrease pollution and to save fuel by appling idle stop & go system. Also, the ISG has function named regenerative braking system which changed the force of inertia into the electric energy when we operate brake. The ISG can assist the hybrid engine when need for power. But the ISG located near engine room is working at the severe environment relatively, so it need to take temperature for performance and endurance. In this study, we performed CFD analysis of ISG for predicting the cooling performance, and suggested enhancement points of heat dissipation structure.