RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 학위유형
        • 주제분류
          펼치기
        • 수여기관
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 지도교수
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 냉각유로에 설치된 신발형 리브의 다중목적최적화

        서재원 인하대학교 일반'대학원 2016 국내석사

        RANK : 247663

        A multi-objective optimization of boot-shaped ribs was carried out to trade off between the conflicting objectives, heat transfer enhancement and friction loss in a cooling channel. For the optimization, numerical analysis with three-dimensional Reynolds-averaged Navier-Stokes analysis, surrogate models for function approximation and multi-objective genetic algorithm (MOGA) were used. Four geometrical parameters (the ratios of tip width to rib width, rib width to rib height, rib height to channel height and tip height to rib height) were selected as design variables for the optimization. To characterize heat transfer performance and friction loss, area-averaged Nusselt number at the rib-roughened surface and friction factor, were chosen as the objective functions. The design points were generated using Latin hypercube sampling. Two different cases were considered. In the first case, the objective functions were formulated using response surface approximation (RSA) models while the second one dealt with the kriging (KRG) models. Pareto-optimal front representing the non-dominated solutions was obtained for the selected cases using MOGA. The obtained Pareto-fronts were compared using the performance criterion viz. convergence and spread. Based on the performance analysis results, a new approach to obtain the best Pareto-front is presented. Further, flow dynamics and heat transfer characteristics of some representative solutions on the best Pareto front was used to analyze the variations in the objective functions with the design variables. As the results of the analyses, the predicted objective function values and numerical results had good agreements and the representative Pareto solutions showed increased performances in heat transfer enhancement and reduction in friction losses. 본 연구에서는 신발형 리브가 설치된 냉각유로에서 서로 상충하는 열전달 강화와 마찰손실간의 절충을 위한 다중목적 최적화를 수행하였다. 최적화를 위해 3차원 레이놀즈 평균 나비어-스톡스 방정식을 적용한 수치해석 및 최적설계기법이 사용되었다. 총 4개의 형상변수인 리브 상단과 리브의 너비 비, 리브의 너비와 높이 비, 리브의 높이와 채널 높이의 비 그리고 리브 상단과 리브의 높이 비를 설계변수로 설정하였다. 열전달 강화 및 마찰손실에 대한 목적함수로는 면적 평균 누셀트 수와 마찰계수를 사용하였다. 최적화를 위해 라틴하이퍼큐브 샘플링을 사용하여 40개의 실험점을 얻었다. 전산유동해석을 통해 실험점에서의 목적함수 값을 얻었고, 이를 이용한 두 가지의 서로 다른 경우가 고려되었다. 첫 번째 경우에서 목적함수들은 반응면 근사모델에 의해 공식화 되었고, 두 번째 경우는 크리깅 모델을 이용하였다. 각각의 경우에서 다중목적 유전자 알고리즘을 이용한 파레토 최적해를 구했으며 수렴성 및 스프레드와 같은 최적 성능 기준을 이용해 비교하였다. 성능 분석 결과로 최적의 파레토 프런트를 얻었다. 목적함수 및 설계변수의 변화에 대한 분석을 위해 파레토 프런트의 대표 해들에 대한 유동역학 및 열전달 특성이 비교되었다. 그 결과 예측값과 해석 결과는 잘 일치하였으며 열전달 성능과 마찰손실 저감을 극대화 한 파레토 최적해들은 각각 향상된 성능을 보였다.

      • KBS TV 편성구조의 이원화와 편성행위의 합리화 과정에 관한 연구 : 1992~93년을 중심으로

        서재원 세종대학교 언론홍보대학원 2008 국내석사

        RANK : 247647

        KBS는 1973년에 국영방송에서 공영방송으로 체제가 바뀌었음에도 불구하고 군사 독재정권이라는 특수한 정치체제 아래에서 한 동안 국영방송, 정권의 방송에서 벗어나지 못하였다. 우리나라 방송이 국가권력, 정권으로부터 독립성, 자율성을 확보하기 시작하는 것은 6.29선언에 이은 1988년 노태우 정권의 출범, 방송민주화 진전이라는 정치․사회적 변화에 기인한다. KBS 조직, 방송의 변화도 이러한 역사적 사실들과 연관성을 가지고 있다. 1987년과 1990년 두 번에 걸친 방송법 개정과 방송민주화 실현, 그로 인한 KBS 조직사회의 변화는 KBS 방송의 내용과 질에도 큰 변화를 가져 오게 된다. 1990년 방송법 개정으로 인한 상업방송 SBS 출범, 유선방송․위성방송 출현 전망, 뉴미디어 등장 등은 KBS와 MBC라는 과점적 공영체제 속에서 안정적인 경영을 해오던 KBS로서 대단한 위협이었다. KBS가 안고 있는 기형적인 재원구조, 즉 공영방송이면서도 광고수입이 수신료 수입보다 훨씬 많은 재원 구조의 불균형성은 공영방송 KBS의 약점이었다. 이러한 KBS 재원구조의 취약성은 민영방송 SBS가 등장하고, 다매체 다채널 방송환경이 도래하는 시점에서 KBS TV를 변화시키는 결정적인 계기가 되었다. 1989년부터 KBS 1.2TV 편성의 차별화를 추진해온 KBS는 1991년에 그 이전과는 매우 다른 편성을 하게 된다. 1991년 봄개편에서 KBS는 편성의 주안점을 1TV의 공영성 강화와 2TV의 대중문화 편성 강화에 둔다. 특히 2TV의 경우는 1TV와의 편성 차별화를 통한 경쟁력 강화를 위해 새로운 편성을 시도한다. KBS 1.2TV 편성차별화, 달리 말해 1TV 공영성 강화와 2TV 오락편성 강화는 ‘1992-93년 편성’에서 채널 경쟁력 향상이라는 소기의 목표를 달성했지만 지금도 문제점으로 남아 있는 ‘KBS TV 편성구조의 이원화’를 가져오게 하였다. KBS 편성구조의 이원화와는 개념, 성격이 전혀 다르지만 형성되는 과정과 시기가 매우 유사한 것이 ‘KBS 편성행위의 합리화’ 과정이다. KBS는 아시안게임과 서울올림픽 방송을 위해 1985년 한해에만 500여명에 달하는 신입사원을 채용하고 막대한 예산을 들여 첨단 방송시설과 방송장비를 확충한다. 해외 연수과 견학을 통한 선진방송사로부터의 제작 기법의 전수, 방송 제작 정보의 입수, 새로운 제작 경험의 축적 등은 KBS의 전반적인 제작력을 향상시켰다. 이러한 방송제작 인프라 구축과 1987년 이후의 KBS 조직의 변화, 그리고 새로운 방송환경의 도래는 KBS 편성, 제작의 분위기를 바꾸어 나가는 동시에 새로운 기운을 형성하게 하였다. 특히 방송편성의 경우 1991년에는 편성업무 조직과 시스템이 새롭게 갖춰지고 편성의 비중과 권한이 강화되는 등 여러 변화가 일어난다. 편성업무 조직의 유기적 체계화, 편성 결정과정의 과학화, 편성행위의 효율성 추구, 편성 인력의 전문화 등이 바로 그것이다. 이러한 편성환경의 변화는 결과적으로 편성의 다양화, 방송 프로그램의 품질 향상, 채널 경쟁력 강화로 이어지게 되었다. 또 방송의 민주화는 KBS가 공영방송으로서의 정체성을 재정립하는 계기가 되었고 그것은 결과적으로 편성의 자율성 확대와 독립성 강화, 창의성 진작이라는 여러 긍정적인 효과를 가져왔다. 이외에도 시청자 주권의 강화, 프로그램 공급원의 확대, 제작 영역의 확대 등은 KBS 편성을 변화시키게 되었고, 이러한 변화는 1992-93년의 편성에서 구체적인 프로그램 편성, 프로그램 제작으로 구현된다. 이 논문에서는 1987-93년에 이러한 변화의 요인들이 발생하여 1992-93년 KBS TV 편성에 구현되는 긍정적인 편성의 변화 내용과 절차, 과정 등에 주목하여 그것을 ‘편성행위의 합리화 과정’이라고 규정하였다. 편성 행위의 합리화는 시기적으로는 ‘편성구조의 이원화’ 시기와 대체적으로 일치하지만 전혀 성격이 다르다. 엄밀히 말해 이원화 편성구조 속에서 각기 다른 방송체계가 개별적으로 편성행위의 합리화 과정을 거쳤다고 할 수 있다. 이런 관점에서 이원화가 곧 합리화를 뜻하지 않는 것이다. 이 연구에서는 KBS TV 편성구조의 이원화와 편성행위의 합리화 과정을 추적하기 위하여 1992-93년의 KBS TV 편성의 편성정책과 그 기간에 시행되는 4번에 걸친 개편 편성을 분석하였다. 방송정책, 편성이념, 편성목표와 개편 편성 내용을 유목별로 분석하여 편성구조의 이원화와 편성행위의 합리화가 편성에 어떤 모습으로 구현되고 있는지를 살펴보았다. 또 1992-93년 KBS TV 편성을 변화시키는 편성 결정요인들과 편성환경을 검토하였다. 이러한 관점에서 본 연구는 다매체다채널 방송환경이 시작되는 1990년 초와 비교해서 규모, 질, 다양성 등에서 크게 성장한 KBS TV와 한국의 지상파 TV의 성장 동력이 무엇이었는지를 밝혀서 현재와 같은 편성의 틀과 편성전략이 정착되는 과정을 이해하고자 하였다.

      • AlGaInP계 수직형 적색 발광 다이오드의 광추출효율을 향상하기 위한 연구

        서재원 순천대학교 대학원 2009 국내석사

        RANK : 247631

        본 논문에서는 AlGaInP 기반 수직형 적색 LED의 광추출효율을 개선할 수 있는 다양한 방법은 제시하였다. AlGaInP 기반 적색 LED는 화합물 반도체로서 대기와의 큰 굴절률 차이에 의해 빛이 외부로 빠져 나올 수 있는 각이 매우 좁다. 또한 GaAs 기판의 빛 흡수 문제로 인하여 LED 내부에서 발생되는 상당량의 빛이 흡수된다. Si 전도성 기판을 이용한 Wafer bonding process LED는 매우 효율적인 구조를 갖고 있다. 이 수직형 적색 LED의 장점은 GaAs 흡수기판을 제거하고 전도성 금속 기판을 이용하기 때문에 빛 흡수 문제를 해결하고 GaAs 기판 LED 보다 고전류에서 빛의 포화상태가 발생되지 않는 장점이 있다. 하지만 LED 내부의 빛을 더 효율적으로 빼내기 위한 노력은 계속 지속되고 있다. 이번 논문에서는 이와 같은 문제를 해결하기 위하여 수직형 적색 LED의 반사막 효율을 개선하고, 간단한 방법의 n-표면 roughening을 형성 하였으며, ITO current spreading 층을 통해 n-ohmic 금속의 최적화된 pattern 모형을 제시 하였다. ITO를 이용한 ODR 반사막은 기존의 Ag 반사막 보다 42%의 높은 휘도증가를 보였으며 n-표면 roughening 형성을 통해 9000 nm의 etching 깊이를 갖는 조건에서 roughening이 형성되지 않은 수직형 LED 보다 130 %의 높은 휘도증가를 보였다. 또한 n-ohmic 금속의 metal pattern을 변경 하여 최적화된 패턴모형을 제시하였으며 상위 금속 ITO의 최적화된 current spreading 두께를 보고 하였다. 하지만 본 연구의 LED 소자들은 높은 광학적 특성에 비하여 전기적 특성은 기존의 수직형 LED보다 높은 구동 전압을 보였다. 이것은 ITO층 자체의 높은 저항으로 인하여 LED의 series 저항이 증가된 것으로 판단된다. 따라서 ITO의 저항을 더 낮출 수 있는 증착 조건에서 실험이 진행된다면 LED의 전기적 특성과 광학적 특성을 동시에 만족할 수 있는 고효율 발광다이오드 소자를 얻을 수 있을 것으로 기대된다. In this study, we report on more efficient formations for increasing the light extraction efficiency of AlGaInP based vetical red LEDs. The quaternary AlGaInP material system, grown by metal organic chemical vapor deposition, has proven to be the best choice in many application such as interior and exterior automotive lighting, traffic lights, full color displays, and all kinds of indoor and outdoor signs. The major issue in quaternary AlGaInP LEDs design is the poor light extraction out of the chip due to the large difference of the refractive index between the GaP window (n=3.3) layer and air (n=1). Furthermore, the AlGaInP LEDs are grown on GaAs substrates that are opaque for the emitting wavelengths of this quaternary material. Hence, most of the light radiated from the active region is trapped in the device and is eventually absorbed by the GaAs absorbing substrate. In order to obtain high performance AlGaInP-based LEDs, it is significantly important to enhance the light extraction efficiency. In this study, we fabricated AlGaInP-based vertical LEDs by wafer bonding technique with Si substrate in order to increase the light extraction efficiency of LEDs. First, AlGaInP LED employing a conductive omni-directional reflector (ODR) using ITO and IZO films is presented. The omni-directional reflector consisted of p-type GaP, a transparent conducting oxide layer, and an Ag layer. The transmittance of the ITO and IZO films were found 96% and 95% after annealing process of 350 ℃ at the wavelength of 620 nm, respectively. The forward voltages of the LEDs with TCO/Ag at 20 mA were slightly higher than that of the LEDs with Ag due to the high resistivity of the TCO. The brightness of the AlGaInP LEDs with ODRs using ITO and IZO was increased by 42% and 38% compared with that of the LED with Ag reflector. Secondly , we have investigated the effect of n-side roughness on the light extraction efficiency of the vertical AlGaInP-based light emitting diodes (LEDs). chemical wet etching technique was produced by using a roughened surface with triangle-like morphology. A commonly used H₃PO₄-based solution was applied for chemical wet etching. The light extraction of AlGaInP LED was related to the n-side roughed surface morphology. The morphology of roughed surface is analyzed by the atomic force microscope (AFM). As a result, the roughed surface AlGaInP LED has a root-mean-square (RMS) roughness of 44 nm. The brightness shows 41% increase after roughening n-side surface, as compared to the ordinary flat surface LED. Also, the optimized condition of roughened surfaces was obtained for 900 nm of etching depth. It was shown that the luminous intensity of the AlGaInP-based LEDs with the n-side roughness was two times higher than that of the LEDs without the n-side roughness. Finally, we proposed a new vertical red LED structure using the dot n-ohmic metal patterns and the top surface ITO current spreading layer to enhance the optical and electric characteristics. we have investigated the vertical red LEDs using the ITO current spreading layer as a function of ITO thickness, and the n-ohmic metal patterns are modified by size and area. The AlGaInP-based vertical LED using the ITO current spreading thickness of 150 nm and the smallest n-ohmic metal are shown the higher luminous intensity of 353 mcd at 20 mA. The luminous intensity shows 20% increase than the conventional device.

      • 철도터널 하부 여굴처리 방법에 대한 정적 및 동적 안정성 연구

        서재원 서울과학기술대학교 2018 국내박사

        RANK : 247631

        철도의 고속화에 따라 선형의 직선화와 함께 터널이 철도노선에 차지하는 비중은 급격하게 증가하였으며 터널 굴착 시 필연적으로 발생하고 있는 여굴은 터널의 안정성에 큰 영향을 미치고 있다. 또한 여굴은 시공의 경제성에도 매우 중요한 요소이기도 하다. 터널 굴착 시 천단부 여굴은 굴착공법의 발달과 함께 점차 감소하고 있는 추세이나 바닥부 여굴은 터널의 안정성에 미치는 영향이 상대적으로 적은 관계로 지속적으로 발생하고 있는 실정이다. 한국철도시설공단에서는 바닥부 여굴에 대하여 10cm 정도의 콘크리트 채움을 시공비로 인정하고 있으나, 그 이상에 대해서는 시공사가 부담하여 채움을 실시하고 있다. 바닥부 여굴에 대한 채움은 콘크리트 채움을 원칙으로 하고 있으나 경우에 따라 버림 콘크리트와 혼합골재를 병행하여 시공하는 곳도 발생하고 있다. 이는 궤도 하부에 연속체 재료와 불연속체 재료의 존재를 발생시키게 되며, 열차 운행 중 발생하는 진동의 전파에 영향을 미치게 된다. 일반적으로 콘크리트와 같은 연속체 재료만 존재하는 경우에는 열차운행에 의한 진동이 터널주면 암반으로 자연스럽게 전파될 수 있는 조건이 발생하지만 불연속체가 존재하면 진동의 전파와 반사에서 다른 특성을 나타낼 수밖에 없게 된다. 이에 본 논문에서는 터널 바닥부 채움 재료에 대하여 시멘트 혼합비율을 5%, 11.5%, 18% 등으로 달리하여 시료를 제작하였다. 제작된 시료는 정적 및 동적 물성시험을 실시하였으며, 이를 바탕으로 수치해석을 실시하였다. 또한 원주~강릉 복선전철의 00터널 여굴 발생구간에 현장계측을 실시하였고, 계측결과와 수치해석 결과를 비교 검증하여 해석결과에 대한 신뢰성을 확보하였다. 수치해석 결과 모든 재료의 배합은 정적 안정성을 만족하는 것으로 나타났으나 동적거동에서는 혼합골재와 시멘트 함유량이 낮은 채움재를 사용하였을 경우 특정 운행속도에서의 공진발생 가능성을 확인하였다. Alignments of railways recently constructed in Korea have been straightened due to the advent of high-speed rail, which means increasing the numbers of tunnels and bridges. Overbreak during tunnel construction may be unavoidable, and is very influential on overall stability. Over-excavation in tunneling is also one of the most important factors in construction costs. Overbreak problems around crown areas have decreased with improvements of excavation methods, but overbreak problems around bottom areas have not decreased because those areas are not very influential on tunnel stability compared with crown areas. The filling costs of 10cm thickness of overbreak at the bottom of a tunnel are covered under construction costs by Korea Railway Authority regulations, but filling costs for more than the covered thickness are considered losses of construction cost. The filling material for overbreak bottoms of tunnels should be concrete, but concrete and mixed granular materials with fractured rock are also used for some sites. Tunnels in which granular materials with fractured rock are used may have a discontinuous section under the concrete slab track. The discontinuous section influences the propagation of waves generated from train operation. When the bottom of a tunnel is filled with only concrete material, the bottom of the tunnel can be considered as a continuous section, in which the waves generated from a train may propagate without reflection waves. However, a discontinuous section filled with mixed granular materials may reflect waves, which can cause resonance of vibration. The filled materials and vibration propagation characteristics are studied in this research. Tunnel bottom filling materials that have ratios of granular material to concrete of 5.0%, 11.5%, and 18.0% are investigated. Samples were made and tested to determine their material properties. Static and dynamic numerical analyses were performed using the FEM program under train operation load. The reliability of the analyses was confirmed through verification and comparison between the numerical analyses and field measurements which were performed in 00 tunnel of Wonju-Gangneung double track line. Test results were found to satisfy the stability requirements. However, dynamic analyses results show that some mixed ratios may generate resonance vibration from train operation at certain speeds.

      • STEATH MACHINE : Deleuze의 '추상기계abstract Machine'개념의 건축적 적용을 중심으로

        서재원 경기대학교 건축전문대학원 2003 국내석사

        RANK : 247631

        건축은, 주변의 힘과 관계없는 통일된 전체unified body가 아니라 도시의 복잡하고 보이지 않는complex and unforeseen관계들 속에 내재된immanent '고원plateau'이며 도시 구성요소들urban components의 하나의 특이점singularity이다. 그것은 건축 그 주체에 의해 의도적으로 또는 작위적arbitrary으로 생성된다기 보다는 내부에 잠재된virtual 주름fold들을 필연적인 내부의 계기들internal motivation과 external force와의 결연affiliation에 의해서 드러내는unfold 일련의 'INVOLUTION'의 과정이다. 특정부지에 특정 프로그램의 건축이 일어나기 위한 객관적 선험의 장은 이미 존재하고, 또한 항상 존재하며 건축이라는 사건 자체는 이러한 계열화된 관계(이것은 항상 연결 접속 될 수 있고 n-1의 유동적인 구조라는 점에서 리좀rhizome이다)들의 강도intensity만이 도주하는 고른 판plane of consistency위에서 이미 구체적 배치물concrete assemblage로 존재한다. 추상기계abstract Machine는 이러한 concrete assemblage를 현실화actualization하는 매개물milieu로서 끊임 없이 external force들과 반응하며 작용하고 스스로를 생성하는 자기 생성 체계이다. 그것은 비정확 하지만 엄격하고anexact yet rigorous, 엄격하지만 예측불가능rigorous yet unpredictable한 것이다. 이러한 의미에서 눈 결정체snow crystal는 abstract Machine이 external force(중력, 바람, 대기압, 습도 기타 규산염입자, 물, 결정, 열의 흐름, 전기적, 자력적 변화...그것들의 복잡한 관계들간의 관계)의 유입으로 나타난 미분화된 형태변이differential transformation의 적절한 예이다. 지난 20년간 해체주의 건축은 특정 부지와 프로그램안에 있는 부조화incongruity, 병치juxtaposition, 대립opposition에 근거해서 불연속적discontinuous이고, 파편화fragment되고, 혼재적heterogeneous이고, 사선diagonal 형태의 전략을 펴나간데 반해서 abstract Machine에서의 external force는 시간에 의해서 그리고 시간과 함께 연속적이며 역동적인 분화를 통해 비례와 균형의 organic body를 anorganic body로 대체하는 미분적 생산의 motive로 대립contradiction보다는 통합incorporation 또는 결연affiliation을 통해 '매끄러움smoothing'을 생산하는 엔진이다. 매끈하다는 것은 차이들을 제거하는 것이 아니라 혼합mixing과 섞음blending과 같은 유동적인 전략들을 통해서 자유로운 강렬함free intensity들을 통합하는 것이다. 구sphere는 구조적으로나 형태적으로나 힘의 평형을 이루고 있는 그 자체로서 완전한whole 도형이다. 그것은 그 조화로운 힘의 조직에 손상을 가하지 않고서는 가감이 이루어 질 수 없는 고정된 외부 경계선과 예측하기 어려운 우연적인 외부의 힘에 대해서 폐쇄되어 있는 내부공간을 포함하고 있다. 그것은 그 자체로서 어떠한 변형을 일으키지 않는다. 그러나 그것의 평형상태가 깨지는 것은 바로 특이점에 의해서이다. 이 특이점으로 인해 갇혀있던 힘들은 불안정의 상태를 이루며 형태변이의 원동력으로서 질주한다. 특이점, 이것이 바로 external force의 유입이다. organic body를 anorganic body로 탈영토화deterritorialization하는 것. 이것이 바로 기관 없는 몸체Body without Organs의 무한한 연결 접속을 열어주는 것이다. 어쩔 수 없이 '매끈한 괴물smooth monstrosity'이 나타날 것이다. Absolutely, an 'architecture' is not a whole unified body independent from environmental forces but a singularity of urban components, an immanent 'plateau' within urban organization of complex and unforeseen relationships. Thus architecture is a process of 'INVOLUTION' unfolding its virtual folds through an inevitable affiliation of internal motivation with external forces rather than intentional and arbitrary 'becoming' of subjective decision. In a urban fabric exists already and always an objective transcendental field of architecture for specific site and program, architecture itself, 'event' emerges as a concrete assemblage on a plane of consistency consisted of flows of intensities of serialized relations (essentially, they are a rhizome for their structure has a potential of ceaseless interaction opening for more conjunction with external influence and a fluid, dynamic network of instable ‘n-1’). Abstract Machine is not only a milieu to actualize these concrete assemblages but also autogenetic and autopoietic system engendering continuous interaction with their external forces. It is an anexact yet rigorous and rigorous yet unpredictable geometry. In this sense, snow crystal is an adequate exemplary of a differential transformation of which actualized abstract machine through the random influx of external forces (gravity, wind, barometric pressure, humidity, silicate dust, water, crystal, thermal flows, electric, and magnetic gradient…their relationship of complex relations). Whereas, for the last two decade through Deconstructivist Architecture, architects argue for the deployment of discontinuous, fragmented, heterogeneous and diagonal formal strategies based on the incongruities, juxtapositions and oppositions within specific sites and programs, external forces triggering abstract Machine is not only an engine that produce 'smoothing' through the incorporation or affiliation rather than conflict or contradiction but also a productive motive for differential transformation that substitutes organic body -one that is essentially proportional and symmetrical - with anorganic body through continuous and dynamic differentiation with time and in time. Smoothing does not eradicate differences but incorporates free intensities through fluid tactics of mixing and blending. Sphere itself is the unified whole shape achieving structural and formal stasis. It contains both a rigid external boundary to which nothing can be added subtracted without jeopardizing the balance of the composition, and an interior space closed to the unpredicted and contingent influences of external forces. There is no potential for mutation anymore. But such a formal stasis becomes broken by incorporating external singularity. Only due to the singularity, these latent forces closed to outside influences are getting so more instable that they start motivating deviatory transformation. Singularity, it is a sign of beginning to deterritorialize organic body into anorganic body for opening infinite conjunction of Body without Organs. Inevitably, there will be smooth monstrosity.

      • 임상적 접근법을 활용한 인공지능 기반 유방암 진단 알고리즘 : 유방 X선 영상에서 이중 촬영상을 활용한 딥 러닝 기반의 유방 종괴 검출

        서재원 가천대학교 대학원 2023 국내석사

        RANK : 247631

        유방 X선 영상은 초기 유방 진단의 주요 영상 모달리티로 이용되며, 기준 촬영상으로써 상하촬영상과 내외사위촬영상이 사용된다. 유방암 임상 진단에서 두 기준 촬영상을 활용할 때 단일 촬영상만을 이용한 판독에 비하여 위양성 감소 및 검출률 향상에 도움이 된다고 보고되어 왔다. 이러한 이중 유방 X선 영상 활용의 이점을 적용함으로써 유방 종괴 검출의 성능을 높이기 위한 다양한 인공지능 기반의 컴퓨터 보조 진단 시스템 개발 연구들이 진행되었다. 하지만 주로 단일 영상에서 유방 종괴 영역의 패치 데이터를 생성한 후, 각 영상으로부터 추출된 두 패치의 일치 여부에 대해 판별하는 이단계방식으로 진행되며, 위양성 제거의 목적의 알고리즘을 제안하였다. 따라서 본 연구는 이중 촬영상을 동시에 활용하는 합성곱 신경망(Convolutional neural network, CNN) 기반의 CoDualnet을 제안함으로써 유방 종괴 검출을 단일단계방식으로 진행하며 위양성 제거 및 검출률을 높이고자 하였다. 해당 알고리즘에 대한 효과를 확인하기 위하여 VGGnet16, Resnet50, EfficientnetB5 모델을 활용하였으며, 제안한 구조를 적용하지 않은 상태의 단일 촬영상 기반의 모델과 비교하였다. 이중촬영상을 활용한 VGGnet16기반의 모델에서 평균 0.709의 Dice similarity coefficient(DSC)으로 가장 높은 성능을 보였으며, 같은 구조의 단일촬영상 기반 모델에 비해 0.120의 향상을 보이며 제안하는 구조의 유효성을 확인할 수 있었다.

      • 대학생의 내적통제가 진로준비행동에 미치는 영향:셀프리더십의 매개효과

        서재원 상지대학교 일반대학원 2017 국내석사

        RANK : 247631

        국문초록 대학생의 내적통제가 진로준비행동에 미치는 영향: 셀프리더십의 매개효과 상지대학교 평화안보·상담심리대학원 상담심리전공 서 재 원 본 연구에서는 대학생의 내적통제와 셀프리더십, 그리고 진로준비행동의 관계를 살펴보고 내적통제와 진로준비행동의 관계에서 셀프리더십이 매개하는지를 알아보고자 하였다. 이를 위해 강원도 W시에 소재한 대학교 1~4학년을 400명을 대상으로 다음과 같은 척도를 사용하여 설문을 실시하였다. 내적통제를 알아보기 위해 김현진(2012)이 개발하고 이명희(2013)가 수정한 척도를 사용하였으며, 진로준비행동은 김봉환(1997)이 제작하고 타당화한 진로준비행동척도를 이명숙(2003)이 수정한 척도를 사용하였다. 셀프리더십은 Houghton과 Neck(2002)의 셀프리더십 척도(RSLQ)를 신용국, 김명소, 한영석(2009)이 번안하여 국내 대학생을 대상으로 타당화한 척도를 사용하였다. 본 연구의 결과를 요약하면 다음과 같다. 첫째, 주요 변인들 간의 상관분석 결과, 내적통제성과 진로준비행동은 정적상관이 나타나고, 내적통제와 셀프리더십과는 부적상관이 나타났다. 즉, 대학생의 셀프리더십이 높아질수록 내적통제는 낮아지고 진로준비행동은 높아진다는 것을 확인하였다. 둘째, 내적통제성과 진로준비행동에서 셀프리더십이 매개하는 지를 Baron과 Kenny(1986)의 Sobel 검증을 통해 진로준비행동을 부분매개 하는 것으로 나타났다. 이는 대학생의 내적통제가 진로준비행동에 영향을 주기도 하지만, 셀프리더십을 매개로하여 간접적인 영향을 미치는 것을 의미한다. 이는 대학생들에게 있어서 셀프리더십 능력의 함양이 중요한지를 나타내는 결과라 할 수 있다. 따라서 대학에서 셀프리더십 교육의 강화와 셀프리더십 증진 프로그램 개발이 필요하다. 본 연구는 선행연구에서 다루지 않았던 내적통제와 진로준비행동의 관계를 파악하고, 대학생이 능동적으로 진로준비행동을 할 수 있는 개인내적 요인인 셀프리더십의 중요성을 밝혔다는 데 의의가 있다. 주요어 : 내적통제, 진로준비행동, 셀프리더십

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼