RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        시간 오차에 강인한 OFDM 주파수 옵셋 추정 기법

        김상훈,윤석호,Kim Sang-Hun,Yoon Seok-Ho 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.6C

        This paper addresses the frequency offset estimation problem in the presence of the timing error for OFDM systems. When the timing error exists, the correlation value used for the frequency offset estimation could be reduced significantly due to the timing error, resulting in considerable degradation in estimation performance. In this paper, using the coherence phase bandwidth (CPB) and a threshold, a novel frequency offset estimation scheme is proposed and based on which, an efficient timing error estimation scheme is also proposed for the re-estimation of the frequency offset. The performance comparison results show that the proposed frequency offset estimation scheme is not only more robust to the timing error but also has less computational complexity, as compared with the conventional schemes. It is also demonstrated by simulation that theproposed timing error estimation scheme gives a reliable estimate of the timing error. 본 논문에서는 직교 주파수 분할 다중 (orthogonal frequency division multiplexing: OFDM) 방식의 무선 전송 시스템에서 시간 오차가 (timing error) 존재할 때 주파수 옵셋을 (frequency offset) 추정하는 기법에 대해 다루었다. 시간 오차가 존재하면, 주파수 옵셋 추정식의 상관값이 (correlation value) 감소하게 되어 추정 성능의 감소를 가져온다. 이를 해결하기 위하여, 동기 위상 범위와 문턱값 기반의 주파수 옵셋 추정 기법을 제안하였다. 더불어 이를 기반으로 한 시간 오차 추정기법을 제안하였다. 제안한 기법의 성능을 평가하기 위해서 모의실험을 수행하였고, 제안한 기법이 기존 기법보다 연산 복잡도가 낮으며 시간 오차에 강인함을 확인하였다. 제안한 시간 오차 추정기법은 주파수 옵셋 재 추정에 사용될 수 있으며, 신뢰성 있는 추정값을 제공함을 보였다.

      • SCISCIESCOPUSKCI등재

        Blind symbol timing offset estimation for offset-QPSK modulated signals

        Kumar, Sushant,Majhi, Sudhan Electronics and Telecommunications Research Instit 2020 ETRI Journal Vol.42 No.3

        In this paper, a blind symbol timing offset (STO) estimation method is proposed for offset quadrature phase-shift keying (OQPSK) modulated signals, which also works for other linearly modulated signals (LMS) such as binary-PSK, QPSK, 𝜋/4-QPSK, and minimum-shift keying. There are various methods available for blind STO estimation of LMS; however, none work in the case of OQPSK modulated signals. The popular cyclic correlation method fails to estimate STO for OQPSK signals, as the offset present between the in-phase (I) and quadrature (Q) components causes the cyclic peak to disappear at the symbol rate frequency. In the proposed method, a set of close and approximate offsets is used to compensate the offset between the I and Q components of the received OQPSK signal. The STO in the time domain is represented as a phase in the cyclic frequency domain. The STO is therefore calculated by obtaining the phase of the cyclic peak at the symbol rate frequency. The method is validated through extensive theoretical study, simulation, and testbed implementation. The proposed estimation method exhibits robust performance in the presence of unknown carrier phase offset and frequency offset.

      • KCI등재

        소송상 상계 재항변 불허 판결로 살펴본 상계충당, 소송외 상계의 해석론

        송영복 사법발전재단 2016 사법 Vol.1 No.36

        Supreme Court Decision 2012Da107662 Decided March 20, 2015 (hereinafter “the subject decision”) held that reply to an answer for offset in court was impermissible on the substantive (as opposed to procedural) grounds of the “effectiveness of offset (i.e., extinction of the defendantʼs bond)” and the “plaintiffʼs possession of alternative means of relief (i.e., making additional amendments to the claim and filing a separate claim).” In case the defendant puts up a defense of offset in court by designating the bond most favorable to himself/herself as vanishing bond, the plaintiff claiming for multiple bonds has the following three options: (a) to reply to an answer for offset in court; (b) to plead for offset appropriation; or (c) to give notice of his/her intent to offset out of court by designating the bond most favorable to himself/herself, and then to plead for the same in court. The Korean Civil Act explicitly requires the application mutatis mutandis of the provision on payment appropriation to offset appropriation. However, the said provision seems inappropriate for its oversight of the difference between offset and payment. Nevertheless, explicit provisions deserve deference at least in statutory construction. In the context of offset appropriation, the offsetting party has the right to designate the bond to be extinguished, insofar as he/she keeps to the descending order of priority from cost, to interest, and to principal. Thus, an offset appropriation plea does not differ much in its outcome from that of a reply to an answer for offset in court. The option of giving notice of the plaintiff’s intent to offset out of court by designating the bond most favorable to himself/herself, and then to plead for the same in court, leads to an opposite outcome from that of a reply to an answer for offset in court. This is because, under the reasoning of the subject decision, the plaintiff’s notice of intent to offset out of court takes effect before the defendant’s answer for offset in court, which takes effect only when the court makes a substantive decision on offset. However, it does not seem fair for the conjunctive nature of the answer for offset in court to work to the defendantʼs disadvantage. Nor is it acceptable that the outcome of a pleading to the same effect should differ depending on whether it was made in or out of court. Therefore, an answer for offset in court ought to take substantive legal effect immediately when the notice of that intent reaches the plaintiff, and its effect should retroactively expire unless the court makes a substantive decision on the offset pleadings. As such, the conclusion of the subject decision (denying a reply to an answer for offset in court) is mostly consistent with the outcome of offset appropriation pleading, yet not with that of offsetting out of court and then pleading it in court. Therefore, it is necessary to construe the point at which the answer for offset in court take substantive legal effect to mean “when the notice of that intent reaches the plaintiff.” 대법원 2015. 3. 20. 선고 2012다107662 판결(이하 ‘대상판결’이라 한다)에서는 ‘상계의 효력(자동채권의 소멸)’과 ‘원고의 별도 권리구제수단 보유(소의 추가적 변경과 별소 제기)’라는 실체법적 측면을 지적하면서 소송상 상계의 재항변이 허용되지 않는다고 판시하였다. 피고가 피고 자신에게 가장 유리한 채권을 수동채권으로 지정하여 소송상 상계항변을 할 경우, 여러 채권을 청구하는 원고로서는 원고 자신에게 유리한 상계 결과를 주장하기 위하여 ① 소송상 상계의 재항변 외에도 ② 상계충당을 주장하거나 ③ 소송 외에서 원고에게 유리한 내용으로 소멸될 채권을 지정하여 상계 의사 표시를 한 후 이를 소송에서 주장하는 방법이 있다. 민법은 명문으로 상계충당 시 변제충당 조항을 준용하도록 규정하나 이는 상계와 변제의 차이를 간과한, 적절하지 않은 입법이다. 그러나 적어도 해석상으로는 명문 규정을 존중할 필요가 있다. 상계충당에서는 상계자에게 소멸할 채권에 관한 지정권이 있고, 다만 그 지정권은 비용 → 이자 → 원본의 순서를 뒤집지 못한다. 따라서 상계충당 주장은 소송상 상계의 재항변 결과와 별다른 차이가 없다(적어도 원본채권들 사이의 충당 순서를 뒤집지는 못한다). 소송 외에서 원고에게 유리한 내용으로 소멸될 채권을 지정하여 상계 의사 표시를 한 후 이를 소송에서 주장하는 방법은 소송상 상계의 재항변 결과와는 정반대가 된다. 대상판결 설시의 논리를 일관하면 ‘상계에 관한 법원의 실질적 판단이 이루어지는 때’에야 소송상 상계항변의 효력이 발생하는데, 원고가 소송 외에서 한 상계 의사 표시는 피고의 소송상 상계항변보다 먼저 효력을 발생하기 때문이다. 그러나 피고의 이익을 위한 소송상 상계항변의 예비적 성격이 오히려 피고에게 불이익하게 기능하는 것은 부당하고, 같은 취지의 재항변을 소송상으로 하는지 또는 소송 외에서 하고 이를 소송에서 주장하는지에 따라 결론이 달라지는 것 역시 받아들이기 어렵다. 따라서 소송상 상계항변의 실체법상 효력은 그 의사 표시가 원고에게 도달된 때에 바로 발생하고, 법원이 상계항변에 관하여 실질적인 판단을 하지 않는다면 소급적으로 소멸한다고 보아야 한다. 대상판결의 결론(소송상 상계의 재항변이 허용되지 않음)은 이처럼 상계충당 주장의 결과와는 대체로 비슷하나, 소송외 상계 후 소송에서 주장하는 방법의 결과와는 다르다. 소송상 상계항변의 실체법적 효과 발생 시기를 ‘그 의사 표시가 원고에게 도달된 때’로 보는 해석이 필요하다.

      • KCI등재

        DAC를 이용한 Offset-PLL 설계 및 제작

        임주현(Ju-Hyun Lim),송성찬(Sung-Chan Song) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.2

        본 논문은 GSM(Global System for Mobile communications)에서 주로 사용되는 Offset-PLL(Phase Locked Loop) 방식을 사용하여 낮은 위상 잡음과 빠른 위상 고정 시간, 우수한 불요파 특성을 갖는 주파수 합성기를 설계 제작 하였다. 제안된 주파수 합성기의 구조는 3번의 주파수 하향 변환을 통해 낮은 위상 잡음 갖도록 하였으며, 높은 주파수 해상도를 갖도록 세 개의 offset 주파수중 최종 offset 주파수를 DDS(Direct Digital Synthesizer)를 이용하여 생성하였다. 또한, 빠른 스위칭 속도를 가질 수 있도록 DAC(Digital to Analog Converter)를 사용하였다. DAC 사용에 따른 위상 잡음 열화를 줄이기 위해 DAC 노이즈 제거를 위한 필터를 설계하여 성능을 개선하였다. In this paper, we designed a frequency synthesizer with a low phase noise and fast lock time and excellent spurious characteristics using the offset-PLL(Phase Locked Loop) that is used in GSM(Global System for Mobile communications). The proposed frequency synthesizer has low phase noise using three times down conversion and third offset frequency of this synthesizer is created by DDS(Direct Digital Synthesizer) to have high frequency resolution. Also, this synthesizer has fast switching speed using DAC(Digital to Analog Converter). but phase noise degraded due to DAC. we improved performance using the DAC noise filter.

      • KCI등재

        VSB 수신기를 위한 반송파 위상 오차에 독립적인 심벌 타이밍 옵셋 추정 알고리즘에 대한 연구

        신성수(Sung Soo Shin),김준태(Joon Tae Kim) 한국방송·미디어공학회 2011 방송공학회논문지 Vol.16 No.1

        In this paper, we propose an alternative carrier phase independent timing recovery method for VSB receivers. The Gardner algorithm may not estimate a timing offset in VSB systems when the residual carrier phase offset is contained in the signal. We use the conjugate multiplication of received signals for cancelling out the carrier phase offset. Then Gardner algorithm is employed for extracting the spectral line. The proposed method generates a consistent timing error even in the presence of the carrier phase offset.

      • KCI우수등재

        멀티코어 기반 차량용 임베디드 시스템의 타임-트리거드 아키텍처 설계와 구현

        배재현,유민수 한국정보과학회 2022 정보과학회논문지 Vol.49 No.12

        Recently, automotive electrical/electronic (E/E) architectures have considered the Multicore AUTOSAR platform for guaranteeing the safety and performance of automotive systems. However, inter-core communication response time delays due to spinning caused by spinlock deteriorate Multicore performance. This paper presents the design of a Time-Triggered Architecture (TTA) to optimize the Multicore system. In our approach, we present the TTA design methodology, including the task allocation algorithm using DQN reinforcement for inter-core load balancing, the Harmonic-Period setting algorithm, and the task Offset, Deadline setting algorithm. Then, we proposed a Timing Violation detection method using Data Version to apply it to the AUTOSAR platform. For verification, we applied the TTA algorithm to the Fuel Cell Controller (FCU) task model. Our simulations showed that the load balancing rate was improved by 94% compared to the existing controller, and its scalability covered at least 78% of the optimal value. It also showed that mutual exclusion was enforced and confirmed that each algorithm was well applied. 최근 차량용 임베디드 시스템은 안전성과 성능 향상을 위해 멀티코어를 사용한다. 하지만 코어 간 데이터 통신 시 발생하는 Spinning 시간은 태스크의 응답시간 지연을 초래한다. 이에 본 논문에서는 Time Triggered Architecture (TTA)를 이용하여 AUTOSAR 멀티코어 환경에서 스케줄링 최적화하는 방법을 제시한다. 각 태스크의 스케줄링 가능성을 확보하기 위해, DQN (Deep Q-Network) 강화학습을 이용한 태스크 할당 알고리즘을 제시하여 코어 간 부하 균등화를 최적화한다. 또한 태스크 Harmonic Period 설정하는 방법과 태스크 Offset, Deadline 설정 알고리즘을 설명한다. 이후 런타임에서 다른 코어의 타이밍 오류로 인한 문제 발생을 감지하는 방법에 대해 설명한다. 연료전지제어기 모델에 적용 결과, 부하 균등화 정도가 94% 개선되었으며 태스크의 실행구간이 상호 배제가 강제됨과 각 알고리즘이 잘 적용됨을 확인하였다. 또한 태스크 할당 알고리즘은 최적의 값 대비 약 78% 이상의 확장성을 보였다.

      • KCI등재

        무인이동체 및 지상국 컴퓨터 간의 시간 정보 동기화를 위한 시스템 연구

        이원석,이운상,송형규,Lee, Won-Seok,Lee, Woon-Sang,Song, Hyoung-Kyu 한국반도체디스플레이기술학회 2020 반도체디스플레이기술학회지 Vol.19 No.1

        In this paper, system that includes multiple unmanned aerial vehicles (UAVs) are considered. The vehicles are equipped with a mission computer for a specific mission and equipment. The mission equipment operates based on the time of mission computer. Also, data collected by flight computer and mission computer is saved with the time of each operating system. Generally, time offset between multiple computers always exists, though the computers are connected to the Internet. When the data collected by multiple computers is combined, the time offset causes damage on reliability of the combined data. Computers that connected to the Internet are synchronized by network time protocol (NTP). This paper proposes a system that the time of multiple mission computers are synchronized by the same NTP server to minimize the time offset. In the results of the measurement, the system time offset of multiple mission computer is maintained within 10ms from the system time of the server computer.

      • KCI등재후보

        접속동기 오차에 강한 SC-FDMA 기법

        김봉석,최권휴 통신위성ㆍ우주산업연구회 2012 한국위성정보통신학회논문지 Vol.7 No.3

        본 논문에서는 상향링크에서 낮은 PAPR(Peak to Average Power Ratio)을 가지면서 사용자 간 동기 오차 범위를 크게 확장한 MC DS CDMA(Multiple Carrier Direct Spread Code Division Multiple Acceess) 형태의 SC-FDMA(Single Carrier Frequency Division Multiple Access) 기법을 제안한다. 제안하는 기법은 상향링크 준동기 환경에 강한 특성을 가진 MC DS CDMA 기법의 높은 PAPR 을 갖는 단점을 보완하기 위해 부분 IFFT(Inverse Fast Fourier Transform) 연산 이전에 부분 DFT(Discrete Fourier Transform)연 산을 수행한다. 제안하는 기법은 ±1칩 준동기 상황에서 ‘0’상관도를 갖는 PSW(Properly Scrambled Walsh) 부호를 시간 도메인으로 스프레딩하여 레인징 절차를 수행하지 않고서도 사용자 간 최대 ±1 OFDM 심벌 길이 이내의 시간 오차이내에서는 MAI(Multiple Access Interference)가 발생하지 않게 한다. 실험결과에서는 준동기 상황을 개선하기 위해 제안된 기존의 SC-FDMA 방식에 비해 사용자 간 동기 오차에 강한 특성이 있음을 보인다.

      • KCI등재

        A 12-Gb/s Continuous-time Linear Equalizer with Offset Canceller

        Baekjin Lim,Changsik Yoo 대한전자공학회 2019 Journal of semiconductor technology and science Vol.19 No.2

        A DC-offset of a continuous-time linear equalizer (CTLE) is cancelled by an analog offset canceller (OFC). The bandwidth (BW) of the OFC is designed to be 10-㎑ not to affect the received signal integrity. The BW of the OFC set by an active-RC integrator is lowered by increasing the effective resistance through pulse width modulation (PWM). The input offset of the OFC itself is removed by employing chopping technique. The offset-cancelled CTLE is applied to a four-channel 12-Gb/s wireline receiver compliant with thehigh-definition multimedia interface (HDMI) version 2.1 standard. The 12-Gb/s wireline receiver has been implemented in a 28-㎚ CMOS process. The eye opening for the bit-error rate (BER) smaller than 10<SUP>-12</SUP> becomes larger than 0.26 unit-interval (UI) with the OFC while the BER is always larger than 10<SUP>-12</SUP> without the OFC.

      • KCI등재

        소프트웨어 모뎀 시공간 선 부호화 시스템의 채널 대칭성을 위한 CFO·STO·SCO 추정, 보상 기법

        김수빈,이한결,이송민,김재홍,김주엽,정진곤 한국통신학회 2022 韓國通信學會論文誌 Vol.47 No.9

        This study suggests CFO·STO·SCO estimation and compensation method for the spatial-diversity-achieving STLC system. As the knowledge of channel state information is available only at the transmitter, the STLC encoding is performed by exploiting the reciprocity between the uplink and downlink channels. Though the channel reciprocity is theoretically valid for the TDD system, the channel asymmetry occurs practically due to the effect of CFO·STO·SCO. Therefore, we propose a two-step estimation method that efficiently compensates the effect of CFO·STO. Furthermore, a compensation method was proposed to reduce SCO and residual phase offset. Through a software-defined modem-based single-input single-output system testbed, it is experimentally shown that the channel reciprocity is obtained form the proposed methods. 본 연구는 공간 다이버시티 이득을 얻는 시공간 선 부호화 시스템을 위한 CFO·STO·SCO 추정 및 보상 기법을제안한다. 송신단은 상향링크와 하향링크 채널 사이 대칭성을 가정하고 추정한 상향링크 채널 정보로 인코딩을 수행한다. 하지만, CFO·STO·SCO로 인한 채널 비대칭성 발생으로, 추정한 상향링크 채널 정보로 STLC 인코딩을 한경우, STLC 통신에 있어 공간 다이버시티 이득을 확보할 수 없다. 이에 본 연구에서는 CFO·STO를 효과적으로보상하는 이중 추정 기법과 SCO 및 잔여 위상 오차에 대한 추가 보상 기법을 제시한다. 또한, 소프트웨어 모뎀 기반 SISO 시스템 테스트베드를 구축하여 제안하는 기법을 통해 채널 대칭성이 확보됨을 실험적으로 검증한다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼