http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
설계신뢰도 및 정기검사주기가 저장신뢰도에 미치는영향에 관한 연구 : 일회성 군수장비 시스템을 대상으로
추연원 한국융합학회 2018 한국융합학회논문지 Vol.9 No.7
장시간 저장되어 있다가 사용되는 일회성 군수장비 시스템의 경우, 저장 시간이 지남에 따라 저장신뢰도에 변화가 발생하게 된다. 이에 사용시점이 도래하였을 때 제품 사용에 있어 저장신뢰도가 중요한 품질특성으로 작용하게 되며, 기존의 연구들은 저장신뢰도 향상을 위하여 최적의 정기검사주기 산출을 위한 연구에 초점이 맞춰져 있었다. 본 연구에서는 정기검사주기 뿐 아니라 설계신뢰도를 포함한 분석을 통해 융합적인 관점에서 저장신뢰도에 두 인자가 얼마나 영향을 미치는지 분석을 수행하였다. 이를 위해 일회성 시스템의 대표적인 제품인 유도탄에 기존의 Martinez 저장신뢰도 결정모델을 적용하여 각각 설계신뢰도와 정기검사주기가 미치는 정량적인 효과에 대하여 분석을 수행하였다. 분석 결과를 통해, 현 제품의 설계신뢰도 범주 내에서는 설계신뢰도보다는 정기검사주기 관리가 저장신뢰도 향상에 더 중요한 요인이라는 것을 확인해 볼 수 있었다. In the case of a one-shot logistic equipment system that has been stored for a long time, reliability changes with the passage of time. Therefore, when the time comes to use, the storage reliability of the product is an important quality characteristic, and the existing studies have focused on the research for calculating the optimal period inspection cycle to improve the storage reliability. In this study, we analyzed the influence of the two factors on the storage reliability at the convergence point by analyzing the design reliability as well as the periodic inspection cycle. To do this, we applied the existing Martinez storage reliability model to the missile, a representative product of a one-shot system, and analyzed the quantitative effects of the design reliability and the periodic inspection cycle. From the results of the analysis, it was confirmed that the maintenance of the periodic inspection cycle is more important for the improvement of the storage reliability than the design reliability in the design reliability category of the current product.
일회성 무기체계 특성에 따른 고장 데이터의 오차 및 극복방안
최윤석,마정목 한국군사과학기술학회 2018 한국군사과학기술학회지 Vol.21 No.5
Failure data of systems in many field can be erroneous, which influences the reliability analysis of the systems. The general form of failure data is right censored data with accurate time information. But due to its nature of data collection in the military field, failure time of one-shot weapon systems can have errors which are related to the maintenance period. So this paper suggests a model that can reduce the error by utilizing interval censored data as an alternative to right censored data in weibull distribution.
장현정(Hyun-Jeung Jang),손영갑(Young Kap Son) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.5
본 논문은 탄약, 미사일, 우주발사체 등과 같은 일회성(one-shot) 시스템의 가부반응데이터를 이용하여 신뢰도를 추정하는 새로운 방법을 제안한다. 제안한 방법은 모수 추정법을 기반으로 한다. 제안한 방법은 가부반응 데이터의 시간에 따른 고장 비율 감소를 고려하였으며 모수 추정법의 문제점을 극복할 수 있다. 기존 문헌에 공개된 7 가지 추정방법들과 제안한 방법과의 정확성을 비교하여 제안한 방법을 검증하였다. 정확성 비교 시, 다양한 샘플 수 변화를 고려하여 신뢰도 추정결과에 대한 SSE 를 이용하였다. 정확성 비교 결과, 제안한 방법은 다른 방법에 비해 정확성이 높은 신뢰도 추정결과를 제공하였다. This paper proposes a new reliability estimation method for one-shot systems using quantal-response data, and it is based on a parametric estimation method. The proposed method considered time-variant failure ratio of quantal-response data, and it can overcome problems in a parametric estimation method. Seven reliability estimation methods in open literature were compared to the proposed method in the aspect of accuracy in reliability estimation in order to verify the proposed method. When comparing accuracy in reliability estimation, SSE (Sum of Squared Error) of reliability estimation results for estimation methods were evaluated according to various number of sample tested. The proposed method provided more accurate reliability estimation results than any other method from the accuracy comparison results.
미소한 신뢰도 감소율을 가지는 원샷 시스템의 가부반응 데이터를 이용한 저장 신뢰도 추정방법 개발
장현정(Hyun-Jeung Jang),손영갑(Young Kap Son) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.10
본 논문은 탄약, 미사일, 우주발사체 등과 같은 일회성(one-shot) 시스템의 가부반응데이터를 이용하여 신뢰도를 추정하는 새로운 방법을 제안한다. 제안한 방법은 모수 추정법을 기반으로 한다. 제안한 방법은 가부반응 데이터의 시간에 따른 고장 비율 감소를 고려하였으며 모수 추정법의 문제점을 극복할 수 있다. 기존 문헌에 공개된 7 가지 추정방법들과 제안한 방법과의 정확성을 비교하여 제안한 방법을 검증하였다. 정확성 비교 시, 다양한 샘플 수 변화를 고려하여 신뢰도 추정결과에 대한 SSE 를 이용하였다. 정확성 비교 결과, 제안한 방법은 다른 방법에 비해 정확성이 높은 신뢰도 추정결과를 제공하였다. This paper proposes a new reliability estimation method for one-shot systems using quantal response data, which is based on a parametric estimation method. The proposed method considers the time-variant failure ratio of the quantal response data and it can overcome the problems in parametric estimation methods. Seven reliability estimation methods in the literature were compared with the proposed method in terms of the accuracy of reliability estimation in order to verify the proposed method. To compare the accuracy of reliability estimation, the SSEs (Sum of Squared Error) of the reliability estimation results for the different estimation methods were evaluated according to the various numbers of samples tested. The proposed method provided more accurate reliability estimation results than any of the other methods from the results of the accuracy comparison.
유도무기 시험평가 방법과 신뢰성 성장을 고려한 시험 수량 산출
이연호,김재황,이계신,이종신,이명진,김두현 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.6
Since guided weapon is high-cost and one-shot device which is non-reusable, it requires a lot of resources to prove required accuracy as a part of reliability demonstration. Once a test for proving accuracy rate of guided missile fails, it causes an additional cost and delay of schedule. This study introduces an equation for proper sample size and plan for guided-missile accuracy rate test in order to minimize the risk of test failure. Proper sample size for the test is derived by considering the reliability growth. Furthermore, each task for accuracy rate test is defined according to the development step. Therefore, this study can contribute to reduce sample size for accuracy rate test in order to meet the reliability requirement and assure transparency in the test process.