The Interactive Mechanism of Static and Dynamic Analysis in the Reverse Analysis of Embedded Software

LiuTie-ming,Jinag Lie-hui,Zhu Jing-si,Meng Gang 보안공학연구지원센터 2016 International Journal of Multimedia and Ubiquitous Vol.11 No.10

Because the software reverse analysis method which combined the dynamic and static analyses lacks normative interactive mode, the work of the software reverse analysis is inefficient, and its reusability is poor. Based on dynamic and static analysis process of the embedded software,three kinds of interactive mechanismare proposed, including Static To Dynamic (STD), Dynamic To Static (DTS), Static and Dynamic simultaneous (SDM), and has also presented the method of realizing these three interaction mechanisms in detail. The test results show that interactive mechanisms of STD, DTS and SDM are suitable for correction of abnormal nodes in the results of static analysis, optimization of dynamic information extraction, identification of hidden codes and so on. It can greatly improve work efficiencyof the embedded software reverse analysis.

Numerical analysis for the structural strength comparison of St. Jude Medical and Edwards MIRA bileaflet mechanical heart valve prostheses

권영주 대한기계학회 2010 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.24 No.2

This paper presents a numerical analysis for the structural strength comparison of the St. Jude Medical bileaflet mechanical heart valve prosthesis with flat leaflet and the Edwards MIRA bileaflet mechanical heart valve prosthesis with curved leaflet. Computer aided engineering systems are used in the analysis. The blood fluid pressure is applied to both flat and curved leaflets of the bileaflet mechanical heart valve prostheses for the rigid body dynamic analysis to confirm the almost same dynamic characteristics of both flat and curved leaflet motions. Thereafter, using the same blood fluid pressure and dynamic characteristics of leaflet motions, structural mechanic analyses for both flat and curved leaflets of the mechanical heart valve prostheses are carried out to show quite different stress and deformation results, respectively. Conclusively, from the viewpoint of stress, it is revealed that the St. Jude Medical bileaflet mechanical heart valve prosthesis is structurally stronger and better than the Edwards MIRA bileaflet mechanical heart valve prosthesis. Computer aided engineering systems used in this comparative structural analysis are ADAMS for the rigid body dynamic analysis, and NISA for the structural mechanic analysis.

Fracture mechanics analysis of multipurpose canister for spent nuclear fuels under horizontal/oblique drop accidents

정재윤,김철호,김훈태,김지혜,김윤재 한국원자력학회 2023 Nuclear Engineering and Technology Vol.55 No.12

In this paper, elastic-plastic fracture mechanics analysis is performed to determine the critical crack sizes of the multipurpose canister (MPC) manufactured using austenitic stainless steel under dynamic loading conditions that simulate drop accidents. Firstly, dynamic finite element (FE) analysis is performed using Abaqus v.2018 with the KORAD (Korea Radioactive Waste Agency)-21 model under two drop accident conditions. Through the FE analysis, critical locations and through-thickness stress distributions in the MPC are identified, where the maximum plastic strain occurs during impact loadings. Then, the evaluation using the failure assessment diagram (FAD) is performed by postulating an external surface crack at the critical location to determine the critical crack depth. It is found that, for the drop cases considered in this paper, the principal failure mechanism for the circumferential surface crack is found to be the plastic collapse due to dominant high bending axial stress in the thickness. For axial cracks, the plastic collapse is also the dominant failure mechanism due to high membrane hoop stress, followed by the ductile tearing analysis. When incorporating the strain rate effect on yield strength and fracture toughness, the critical crack depth increases from 10 to 20%.

조속기의 동적 평형위치 해석

강주석(Kang, Juseok) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.10

본 연구에서는 구속조건을 가진 기계계의 동적 평형위치를 다물체 동역학 해석방법을 이용하여 계산하였다. 다물체계에서 얻어지는 시간 구속조건을 가진 구속조건식과 동역학식으로부터 독립좌표계로 이루어진 동적평형식을 유도하였다. 동적 평형식은 구속조건식과 함께 비선형 대수방정식의 형태로서 Newton-Raphson 방법을 이용하여 수치 해를 구하였다. 제안된 동적 평형 계산 방법을 조속기에 적용하여 동적 평형위치를 구하였다. 해석결과는 상용 프로 그램의 동역학해석을 통한 평형위치의 결과와 비교하여 타당성을 검증하였다. 조속기의 회전 각속도에 대한 평형위치 를 계산하고 설계 파라미터에 대한 평형위치의 영향을 분석하였다. This paper proposes a method to obtain the dynamic equilibrium configuration of a constrained mechanical system by using multibody dynamic analysis. Dynamic equilibrium equations with independent coordinates are derived from the time-dependent constraint equations and dynamic equations of a multibody system. The Newton–Raphson method is used to find numerical solutions for nonlinear algebraic equations that are composed of the dynamic equilibrium and constraint equations. The proposed method is applied to obtain the dynamic equilibrium configuration of a speed governor, and the results are verified on the basis of the results from conventional dynamic analysis. Furthermore, vertical displacements at equilibrium configuration, which varied with the rotational velocity of the speed governor, are calculated, and design parameter analysis of the equilibrium configuration is presented.

Investigation of Dynamic-Mechanical-Thermal Analysis of Innovative Hybrid Carbon/Glass Fibers Reinforced by GNPs and Al2O3 for Marine Structures

Mohamed Abu‑Okail,Metwally Abdel Ghafaar,Abou Bakr Elshalakany,Mohamed S. Shiba,Ahmed Abu‑Oqail,Mohammed Gamil 한국섬유공학회 2023 Fibers and polymers Vol.24 No.11

Marine structural applications face numerous challenges related to environmental load, corrosion, and fatigue under varying time and temperature conditions. One of the major challenges faced by marine structural applications is dynamic mechanical thermal analysis (DMTA). In this study, innovative hybrid carbon/glass fibers (CGF) reinforced with different contents (1.5 wt. % and 3 wt. %) of dual nano-powders, including graphene nanoplatelets (GNPs) and aluminium oxide (Al2O3), were developed as reinforcements inside the epoxy matrix. The nanocomposites were fabricated using a hand lay-up technique, resulting in a nanocomposite sheet with dimensions of 300 mm length, 200 mm width, and 2.3 mm thickness. DMTA test specimens were prepared with dimensions of 50 mm length, 10 mm width, and 2.3 mm thickness. To ensure accuracy, three replicates were conducted for each condition, and the average values were calculated for analysis. Before DMTA, the prepared nanocomposites were analyzed using optical microscopy (OM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDAX) to compare the influence of incorporating dual nano-powders. DMTA was carried out at different temperature values (ranging from 10 °C to 105 °C) and times (ranging from 5 to 575 min) at 1 Hz frequency with a heating rate of 4 °C/min and a nitrogen flow rate of 20 ml/min. The main objective of this study was to investigate the influence of incorporating dual nano-powders such as GNPs and Al2O3 on various dynamic mechanical properties including storage modulus, loss modulus, damping factor (DF), and glass transition temperature (Tg) of the hybrid carbon/glass fiber-reinforced epoxy composites. The fabricated hybrid CGF composite with 1.5% wt. GA nanoparticles exhibited higher values for the DF of 0.68 and the Tg of 73.4 °C. However, increasing the nanoparticle content to 3% wt. GA led to a deterioration in the DF (0.54) and a reduction in Tg (27.8 °C) due to decreased bonding between the carbon fibers (CF) and glass fibers (GF) caused by the higher nanoparticle concentration. The complex modulus (E*) values demonstrated expected trends with temperature and time for the CGF-1.5% wt. GA composite, indicating acceptable behaviour. In contrast, the CGF-3% wt. GA composite exhibited lower E* values, indicating a decrease in stiffness and mechanical properties compared to the CGF-1.5% wt. GA composite. Microstructural observations after DMTA revealed a uniform scattering of nanoparticles in the CGF-1.5% wt. GA sample, while the CGF-3% wt. GA sample demonstrated improved scattering of Al2O3 nanoparticles on the surface. The microstructural analysis further indicated a brittle nature with high resistance to crack initiation and propagation in the CGF-1.5% wt. GA composite.

Design and simulation for a one-degree-of-freedom-based rectangular path generating mechanism using an ellipse

이동규,황국하,김병규 대한기계학회 2017 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.31 No.6

Conventional rectangular path generating mechanisms can not avoid structural complexity due to the large number of components andhigh degree of freedom. Therefore, the authors present a simplified rectangular path generating mechanism using an ellipse. The mechanismnot only consists of much fewer components than conventional mechanisms, but also has one degree of freedom. In the designprocedure, a reverse kinematic design is implemented, and a theoretical analysis of the displacement, velocity and acceleration is conductedto validate the superiority of this mechanism. In particular, this paper highlights the low acceleration values at the contact pointsbetween the ellipse and the frame. This is noteworthy since acceleration is directly correlated with impulsive forces that induce earlymalfunctions, low stability and wear in devices using such mechanisms. In addition, this paper discusses achieving optimal eccentricity tohave the lowest acceleration at the corners. Lastly, a dynamics analysis for two cases – a mechanism with a perfect circle and a mechanismwith an ellipse – is carried out using dynamic analysis software to investigate real reaction force at the corners. Conclusively, thenovelty of the mechanism using an ellipse is validated through the kinematics and dynamics analyses.

Development of an Electro-mechanical Driven Broaching Machine

Park, Hong-Seok,Park, In-Soo,Dang, Xuan-Phuong The Korean Society of Manufacturing Technology Eng 2015 한국생산제조학회지 Vol.24 No.1

The machine tools builders are trying to improve the efficiency and performance of the machine tools. The electro-mechanical driven broaching machine has many advantages such as lower noisy operating, higher energy efficiency, and smaller space of installation. This paper presents the structural and mechanical development of an electro-mechanical driven broaching machine that is replaced for traditional hydraulic one. The servo motor, ball screw and roller linear guide are used instead of hydraulic cylinder and translation frictional sliding guides. The simulation method based on FEM was applied to analyze the stress, deformation of the machine for static analysis. The dynamic analysis was carried out for verifying and assessing the mechanical behavior of the developed broaching machine. This work helps broaching machine developer make a better product at the early design stage with lower cost and development time.

Development of an Electro-mechanical Driven Broaching Machine

Hong-Seok Park,In-Soo Park,Xuan-Phuong Dang 한국생산제조학회 2015 한국생산제조학회지 Vol.24 No.1

The machine tools builders are trying to improve the efficiency and performance of the machine tools. The electro-mechanical driven broaching machine has many advantages such as lower noisy operating, higher energy efficiency, and smaller space of installation. This paper presents the structural and mechanical development of an electro-mechanical driven broaching machine that is replaced for traditional hydraulic one. The servo motor, ball screw and roller linear guide are used instead of hydraulic cylinder and translation frictional sliding guides. The simulation method based on FEM was applied to analyze the stress, deformation of the machine for static analysis. The dynamic analysis was carried out for verifying and assessing the mechanical behavior of the developed broaching machine. This work helps broaching machine developer make a better product at the early design stage with lower cost and development time.

Acrylic Polyol 함량을 달리한 폴리우레탄 제품의 형태학적 열적 및 동적,기계적 성질

김태성 ( Tae Sung Kim ),박찬영 ( Chan Young Park ) 한국고무학회 2013 엘라스토머 및 콤포지트 Vol.48 No.4

acrylic polyol로 개질한 polyester형 polyurethane foam을 quasi prepolymer법으로 제조하였다. 열적 및 동적·기계적 성질은 thermal gravimetric analysis 및 dynamic mechanical analysis에 의하여 분석하였다. 또한 유리전이온도는 differential scanning calorimeter로 측정하였다. Acrylic polyol 함량이 증가함에 따라 TGA에 의해 측정한 열적 안정성은 약간 감소하였다. 그리고 acrylic polyol 함량이 증가함에 따라 저장 탄성률은 증가한 반면에 tan delta 값은 감소하였다. Polyester type polyurethane foam modified with acrylic polyol was prepared by quasi prepolymer method. Thermal and dynamic mechanical properties of polyurethane foam were analysed by thermal gravimetric analysis(TGA) and dynamic mechanical analysis(DMA). Also, glass transition temperature was measured by differential scanning calorimeter( DSC). As acrylic polyol contents were increased, thermal stability measured by TGA was slightly decreased. Storage modulus was increased and tan delta was decreased with increasing of acrylic polyol contents.

화재 열 유동을 고려한 구조물의 열응력해석

박홍락,강준원,이진우 한국전산구조공학회 2016 한국전산구조공학회논문집 Vol.29 No.4

이 연구는 화재에 노출된 구조물의 역학적 거동을 평가하기 위한 기반연구로서 화재 유동해석과 열응력해석의 통합 프레 임워크를 확립하고 이를 강재와 콘크리트로 이루어진 대표체적에 적용한 결과를 제시하였다. 먼저 Fire Dynamics Simulator(FDS)를 이용해 임의의 화재곡선으로 모델링되는 화원으로부터 구조물 표면까지 유동해석을 실시하였다. 이를 통 해 구조물 표면에서 시간에 따른 온도 분포를 계산하였고, 이 결과를 비선형 열응력해석에 경계조건으로 적용하였다. 이후의 과정은 화재의 성장 또는 감소에 따라 구조물 표면온도의 변화를 반영하는 열전달해석과 구조해석으로 이루어진다. 제시한 통합 프레임워크에 의해 화재 구조해석을 수행한 결과, 강재와 콘크리트의 대표체적 모두 동일한 하중이 작용할 때 상온 조 건에서는 탄성 거동을 보였지만 화재로 인한 온도 조건을 고려할 경우 소성 거동을 보였다. 이는 구조물이 화재에 노출되는 경우 설계하중보다 작은 하중에서도 한계상태에 이를 수 있다는 것을 의미하며, 따라서 원전구조물이나 교량과 같은 중요 사회기반구조물의 설계 시 구조물의 화재거동 평가가 고려되어야 한다고 할 수 있다. In this study, a numerical analysis framework for investigating the nonlinear behavior of structures under fire conditions is presented. In particular, analysis procedure combining fire-driven flow simulation and thermo-mechanical analysis is discussed to investigate the mechanical behavior of fire-exposed representative volume structures made of steel and concrete, respectively. First of all, fire-driven flow analysis is conducted using Fire Dynamics Simulator(FDS) in a rectangular parallelepiped domain containing the structure. The FDS simulation yields the time history of temperature on the surface of the structure under fire conditions. Second, mechanical responses of the fire-exposed structure with respect to prescribed uniformly distributed loads are calculated by a coupled thermo-mechanical analysis using the time-varying surface temperature as boundary conditions. Material nonlinearities of steel and concrete have been considered in the thermo-mechanical analysis. A series of numerical results are presented to demonstrate the feasibility of the multiphysics structural fire analysis for investigating the structural behavior under fire conditions.